Loading ...
Loading ...
Loading ...
12
GB
Finding new stations – DAB
Should you wish to use your digital receiver for DAB reception in a new location, or if no station
were detected during the initial scan, you can follow this procedure to allow your digital receiver
to nd out which DAB radio stations are available.
1. With the unit in DAB mode press and release the Auto-tune button. The digital receiver will
carry out a full scan of the entire DAB frequencies in your country.
2. As stations are found the station counter on the right-hand side of the display will show the
total numbers of DAB stations in your area, and the stations will be added to the list.
Manual Tuning - DAB
Manual tuning allows you to tune directly to the various DAB Band III channels. DAB Band III
channels are located in the range 5A to 13F.
1. Press and hold the Info button to enter Advanced Information so that the display shows “MANUAL”.
2. Press and release the Tuning control to enter the Manual menu.
3. Rotate the Tuning control to select the required DAB channel.
4. Press and release the Tuning control to select the channel. If a signal is present, this will be
indicated on a signal strength display. The minimum signal marker (0) shows the minimum
signal strength needed for good DAB reception. The signal indicator chevrons go up or down
showing the changing signal strength as you adjust the wire aerial or your digital receiver.
5. Any new stations that are found are automatically added to the stored list of stations.
6. Press and release the Tuning control to return to normal tuning mode.
Loading ...
Loading ...
Loading ...