Loading ...
Loading ...
Loading ...
11
Basic Shooting and Playback Operations
C The Auto Off Function
• When no operations are performed for about one minute, the screen turns off, the camera
enters standby mode, and then the power-on lamp flashes. The camera turns off after
remaining in standby mode for about three minutes.
• To turn the screen back on while the camera is in standby mode, perform an operation
such as pressing the power switch or shutter-release button.
C When Using a Tripod
• We recommend using a tripod to stabilize the camera in the following situations:
- When shooting in dim lighting with the flash mode (A16) set to W (off)
- When the zoom is at a telephoto position
• When using a tripod to stabilize the camera during shooting, set Photo VR to Off in the
setup menu (A19) to prevent potential errors caused by this function.
Recording Movies
Display the shooting screen and press the b (e movie-
record) button to start recording a movie. Press the
b (e) button again to end recording.
• If the battery temperature becomes low, the image
size/frame rate of movies may be restricted. Warm
up the battery with your palms, etc. before use.
Using the LED Light
Use the LED light in dark places, etc.
Press and hold down the r (LED light) button to turn
on an LED light. To turn it off, press the r button.
You can also use the LED light when the camera is
turned off.
• Use LED light timer in the setup menu (A19) to
set the amount of time that elapses before the LED
light turns off.
Loading ...
Loading ...
Loading ...