Loading ...
Loading ...
Loading ...
Service Station Procedures
If you can open the hood without
lifting the hood latch handle, or the
hood latch handle moves stiffly or
does not spring back as before, the
mechanism should be cleaned and
lubricated (see page 233).
SUPPORT ROD
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop.
After closing the hood, make sure it
is securely latched.
CONTINUED
Before Driving
GRIP
4-cylinder models
3. 4-cylinder models
Pull the support rod out of its clip
by holding the grip and insert the
end into the hole on the front of
the hood around the center.
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...