Loading ...
Loading ...
Loading ...
8
Installation heights
–
Over gas and electric cookers, Esatto
recommends our rangehoods to be mounted
at a height of between 600-800mm above the
cooking surface.
– Electric cooktops must have a minimum height of
600mm from the underside of the rangehood to the
cooktop face.
– Gas cooktops must have a minimum of 650mm from
the burner to the underside of the rangedhood.
– It is not recommended to install the rangehood
outside or over open flame grillers or barbecues.
Installing the rangehood
Way one:
–
To install onto the wall drill 2 holes of Ø8mm on a
suitable place according with the centre distance of
hole in the back of the cooker hood.
Insert the nut into the holes.
nsert the screws into the nuts and tight. Put the
cooker hood onto the tighten screws.
–
F
i
x
the cooker hood with saf
ety screw. The two safety
ven
ts are positioned on the back ca
sing, with diameter
of 6mm.
Put the one way valve onto the cooker hood.
–
Drill 4
holes of 6mm diameter at the bottom of the
hanging cupboard.
Put the one way valve on the cooke
r hood, then install
the cooker hood on the bottom of
the hanging
cupboard, tighten the hood with enclosed 4 screws.
INSTALLATION INSTRUCTIONS
CONTINUED
The extensible pipe are optional accessory, not
supplied.
Take off protection film before installation.
There are 2 methods for ventilation , including '
horizontal ventilation' and ' vertical ventilation'. Please
pay attention to the ventilation method when installation.
Vertical ventilation: See Pic A, please use tool take out
the round cover before using, and the air can be vented
from top.
horizontal ventilation: See Pic B, please use tool take out
the rectangular cover before using, and the air can be
vented from back.
The rectangular air outlet for horizontal ventilation is not
supplied.
Way
Air ventilation setting
Outdoor exhausting: Turn the adjuster to outdoor
position, install the outlet, turn on the cooker hood, then
the air will be vented from the outside outlet.
Recycling: the recycling mode with carbon filter ,Turn the
adjuster to indoor position, install the outlet cover, turn on
the cooker hood, then the air can be vented from the
inside outlet.
Note: The charcoal filter is mounted on the back of the
grill and must be changed once three month.
Warning: the charcoal cannot be washed or recycled. It
should be changed at most after 120 hours using. The
carbon filter shouldn’t be exposed to heat.
–
–
–
–
–
–
two:
Loading ...
Loading ...
Loading ...