Loading ...
Loading ...
Loading ...
16
•Take the freezer door and align the pivot holes up with
the bolt holes and assemble them (18).
•Insert the pin into the hinge (19). (Ensure that it is
between the pivot and the freezer door).
•Replace the washer over the pin (20).
Washer
6. Installing the Refrigerator Door
•Insert the door over the axis of the pin (1).
•Remove the cover (2) and place on the opposite side.
•Install the hinge (3), assemble the three screws (4) and
replace the hinge cover (5).
•Check to make sure that both doors close correctly.
AFTER COMPLETING INSTALLATION
Make sure that the corners of the door seals are not
folded over. To ensure a good seal, apply a little silicon
grease on them.
Corners
Corners
18
19
20
1
2
3
5
4
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION
Loading ...
Loading ...
Loading ...