Loading ...
Loading ...
Loading ...
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct
sunlight rain or frost. Stand the
appliance away from heat sources
such as stoves, fires or heaters.
，
●
●
It may not work properly if being left at
a temperature above or below the
indicated range for a long period.
Installing your new appliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order to improve efficiency
of the cooling system and
save energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat.
For this reason, sufficient clear space
should be available around the
refrigerator.
It is advisable for there to be
at least 75mm of space from the back
to the wall, at least 100mm from its
Suggest :
top,at last 100mm from its side to the
wall and a clear space in front to allow
the doors to open 135°. As shown in
following diagrams.
Note:
This appliance performs well within
the climate class from showed in
the table below.
NtoT
●
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. You can adjust
them manually by hand or by using a
suitable spanner.
To allow the door to self-close, tilt the
top backwards by about 10mm.
●
●
Adjusting the door handle
Before you use the appliance, please
check the refrigerator handle. If the
handle is loose, please adjust them by
using an Allen wrench in the clockwise
direction until handle is securely in
place. the handle is fitted with 2
screws.
Allen wrench
Hexagon socket
set screws
Symbol
Ambient Temperature
range()°C
SN
N
ST
T
+10 to +32
+16 to +32
+16 to +38
+16 to +43
Class
Extended
Temperate
Temperate
Subtropical
Tropical
Hisense RefrigeratorHisense Refrigerator
5
≤10mm≤10mm
Loading ...
Loading ...
Loading ...