Loading ...
Loading ...
Loading ...
11
11. After use, ensure the motor base
is switched off at the power outlet
and remove the power cord.
Allow the motor base to cool
before cleaning and storing.
Using the Sports Bottle
and Lid
1. Pour the blended drink into the
600ml sports bottle. Screw the
drinking lid onto the plastic bottle
and your drink is now ready to
take away.
2. To keep the cap open while
drinking, press cap all the
way back and past the tab
(See Fig. 7).
Fig. 7
NOTE: The sports bottle does
not fit to the Blitz motor base for
blending. Pour blended content
from the Blitz blending cup into
the sports bottle to take on the go.
NOTE: Use blended ingredients
immediately or attach the lid
to store in the refrigerator for
later use.
Overload Protection System
The motor is protected from burning
out by a manual reset cut-out switch.
If the blender is overloaded or
operated continuously for too long,
the motor may overheat and stop. To
operate the blender again, you must
switch off, unplug and allow to cool
for approximately 30 minutes. Once
the motor has fully cooled, it is ready
for use again. Some dense mixtures
may cause the blending blade to
rotate more slowly than normal. Do
not operate the blender continuously
with an excessive load for more than
30 seconds. If this occurs again, the
cup may be overloaded, so remove
some of the food and process in
smaller batches.
Loading ...
Loading ...
Loading ...