Loading ...
Loading ...
Loading ...
ENGLISH
How to dismantle parts
30
Separate the lamp by pulling it out ③ while slightly
pressing ① and rotating ② the lamp cover. Turn the bulb
counterclockwise.
OPTION 1 Use a 40-watt bulb(max.) which can be
purchased at a service centre.
OPTION 2 - LED Use only 12VDC LED bulb which can be
purchased at a service centre.
OPTION 1 To remove the lamp cover, press the protrusion under the lamp
cover to the front and then pull the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and
can be purchased at a service centre.
OPTION 2 - LED To replace refrigerator light panel please contact to your
service centre.
Refrigerator
compartment
lamp
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Ice storage bin
(Applicable to
some models only)
After dispenser is
used
(Applicable to
some models only)
NOTE
• Dismantle by reversing the assembly instructions. Be sure to unplug the power
plug before dismantling and assembly. Never apply severe force to dismantle
parts. Parts may be damaged.
NOTE
• Not all bulbs will fit your refrigerator.
Be sure to replace the bulb will one of the same size, shape and wattage.
• The dispenser lights are LEDs that can not be changed.
To remove a shelf, push the shelf to the left
②,lift the
left part of the shelf a bit ①, lift the right part up ③, and
take it out.
Lift the door rack holding both sides ① and pull it out ②.
Hold the ice storage bin as shown in the right figure
and pull it out ② while slightly lifting it ① .
▪ Do not dismantle the ice storage bin unless it is
necessary.
▪ Use both hands to remove the ice bin to avoid
dropping it.
The water collector has no self-draining function. It
should be cleaned regularly.
First take out the water collector cover.
Press the cover where PUSH marked ① to lift the
water collector cover up.
Take out the water collector cover as illustrated ②.
Care and maintenance
Loading ...
Loading ...
Loading ...