Loading ...
Loading ...
Loading ...
Ideal example
S
tructure supports exterior surface
2
1
1
Siding
2
Structure behind siding
Concrete
R D
o not use the included screws. Use screw
anchors (screw ø: 4 mm) designed for
concrete walls.
R Carefully read the instructions supplied with
the anchors. Follow instructions regarding
drill bit diameter, hole depth, etc.
R Drill a pilot hole. Remove any debris after
drilling the pilot hole.
1 Mark the hole depth on the drill bit (
1
)
a
nd then drill a pilot hole.
1
2 R
emove debris.
3 I
nsert an anchor, tighten the screw, then
remove the screw to secure the anchor.
4 I
nsert the screw and tighten it.
2
2
Camera mounting stand
ALC (autoclaved lightweight cellular
c
oncrete)
R Depending on the type of ALC panel, you
may not be able to attach the camera.
Consult the ALC panel manufacturer.
R Do not use the included screws. After
consulting the manufacturer of the ALC
panel, use only commercially-available
metal screw anchors (screw ø: 4 mm)
designed for ALC panels.
R Carefully read the instructions supplied with
the anchors. Follow instructions regarding
drill bit diameter, hole depth, etc.
R Drill a pilot hole. Remove any debris after
drilling the pilot hole.
R Seal the pilot hole with a
commercially-available waterproof sealant.
Other materials (mortar, tile, etc.)
R D
o not use the included screws.
R Consult the builder or licenced professional
regarding the type of anchor appropriate for
the installation location and materials.
R Do not install on gypsum board or concrete
blocks.
18
Setup
HNC600AZ_(en_en)_0325_ver.040.pdf 18 2015/03/25 14:34:18
Loading ...
Loading ...
Loading ...