Loading ...
Loading ...
Loading ...
4
INSTALLATION INSTRUCTIONS
Remove Mounting Plate
NOTE: To avoid possible damage to the work surface, place a
protective cover on the work surface.
1. Remove any remaining contents from the microwave oven
cavity.
2. Remove the mounting plate by peeling off the strips of tape
that attach it to the back of the microwave oven, and set the
mounting plate aside.
3. Tape the microwave oven door closed so that door does not
swing open while the microwave oven is being handled.
NOTE: Do not grip or use the door or door handle while the
microwave oven is being handled.
Rotate Air Deflector
The microwave oven is set for ventless (recirculating) installation.
For wall or roof venting, changes must be made to the venting
system.
NOTE: Skip this section if you are using ventless (recirculating)
installation. Keep the damper assembly in case the venting
method is changed, or the microwave oven is reinstalled in
another location where wall or roof venting may be used.
Wall Venting Installation Only
1. Remove 5 screws attaching damper plate to top of microwave
oven exterior, then lift off damper plate.
2. Keep damper plate and screws together and set aside.
3. Slide air deflector out of microwave oven.
4. Rotate air deflector front to back so that deflector vanes face
the back of the microwave oven, and the exhaust port (open
end) of air deflector aligns with microwave oven exhaust port.
5. Slide air deflector into the back of the microwave oven as
shown, making sure its exhaust port (open end) aligns with the
microwave oven exhaust port.
A. Mounting plate
B. Back of microwave oven
C. Tape (multiple locations)
A. Damper plate
A B C
A
A. Air deflector
A. Microwave oven exhaust port
B. Air deflector exhaust port (open end)
C. Deflector vanes
A. Microwave oven exhaust port
B. Air deflector exhaust port (open end)
C. Deflector vanes
A
A
B
C
A
B
C
Loading ...
Loading ...
Loading ...