Loading ...
Loading ...
Loading ...
WASHING PROCEDURES
Press down the Power Button , the washer
enters a mode of normal wash procedure.
Select a proper water level based on the
quentity of clothes.(The washer will not start
before water reaches the set level.)
PROCESS SELECTION:
If the full cycle of wash , rinse and spin is
not entired,the desired process can be select
(please reference to Functions of operating
switches
PROGRAM SELECTION:
REGULAR: for cottons,linens,synthetic
fabrics.
GENTLE: for silks,knits and soft clothes.
TUB CLEANING: use this program to clean
the tub regularly.
The machine starts to work on pressing
down START/HOLD button . As the washer
finishes washing,the buzzer buzzes and the
power switch cuts off power supply
automatically , the
REGULAR light
1. First loose the adjust foot knob , place the
washer evenly and stably,and tighten
2. Connect with the water inlet hose , and
on the water tap.
3. Insert the power plug into the power socket
(with the earth lead properly connected).
4. Hang the upper drain hose on the pond.
5. Loosely put clothes wash into the tub ( be
careful not to leave coins keys etc.hard
arti
6. Put an appropriate amount of detergent into
the tub , too much of it is both a waste and
difficult to rinse . Please refer to the Table
of Amount of Detergent.
the knob.
turn
cles in their pockets , in case they will
damage the tub.
remain indicating.
1
2
3
4
5
START
HOLD
WATER LEVEL
AUTOMATIC TURNOFF
POWER
LOW
HIGH
RESET
MEDIUM
ON OFF
>750mm
Note:
The water will overflow when the height
of the drain hose under 750mm.
Loading ...
Loading ...
Loading ...