Loading ...
Loading ...
Loading ...
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly.
To adjust for this, attach a piece of wood to
the sill.
WOOD PIECES
WIDTH: 2″
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness, place
a piece of wood on the sill to make it 1/2″
higher than the top of the storm window
frame or the vinyl frame.
Attach securely with nails or screws provided
by the installer.
Installation Instructions
WINDOW REQUIREMENTS
• These instructions are for a standard double-
hung window. You will need to modify them
for other types of windows.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within reach of
the power cord.
• Follow the dimensions in the table and
illustration for your model.
Models AB
AKM14, AKM18 18 3/8″ 27″–42 1/2″
AKM25, AKQ24 19 1/2″ 29 3/4″–44″
1
A
(With accordion panels)
PREPARE THE AIR CONDITIONER
Pull down the front panel and remove the
filter. Remove the front panel by lifting up
at an angle.
Remove the four front screws. Save them
for reinstalling the front housing.
Remove the front housing.
Remove the screw attaching the green
grounding wire to the case and save it for
reinstalling the wire.
3
A
B
B
2
1/2″ higher
than storm
window
frame
Storm window
frame
Wood
Sill
1/2″ higher
than vinyl frame
(on some windows)
Vinyl frame
9
C
D
Loading ...
Loading ...
Loading ...