Loading ...
Loading ...
Loading ...
en Installation
20
Preparing the ceiling
1. Cover the hob to protect it from damage.
2. Determine the position of the frame. In doing so,
determine where the middle should be based on the
hob.
3. Measure and mark the positions of the fastening
screws.
4. Drill four holes with a diameter of 6 mm for the fixing.
Caution!
Ensure that there are no electrical wires, gas pipes
or water pipes in the area where holes are to be
drilled.
5. Screw the fastening screws into the ceiling.
6. Screw in the threaded rods.
7. Screw the nuts approx. 1 cm onto the threaded rods.
Preparing the appliance
1. Remove the grease filters.
Note: Do not bend the grease filter to avoid causing
damage.
2. Loosen the screws on the side covers.
3. Open the odour filter cartridge.
4. Push the side covers inwards and remove them.
5. Close the odour filter cartridge.
1
2
PP
Loading ...
Loading ...
Loading ...