Loading ...
Loading ...
Loading ...
Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
13337620) - 2020 - CRC - 8/26/19
Driving and Operating 311
4. Move to the next tire and
repeat Step 3 for each sensor.
The horn chirps twice when all
sensors are completed.
5. Return to the vehicle to
complete the setup.
Maintenance Reminders
To set up maintenance reminders,
touch the Trailer Maintenance icon.
Select Yes to set up the
maintenance reminders for the
Trailer Profile. Follow the on-screen
prompts. The maximum number of
reminders is 50. Select No to return
to the previous screen.
Towing Assistance
If the Transparent Trailer feature is
available, touch the Towing
Assistance icon to set up
transparent trailer.
Touch Yes to begin set up or touch
No to return to the previous screen.
Follow the on-screen instructions.
A rear trailer camera must be
mounted on the trailer and
electrically connected to the vehicle
before transparent trailer feature
can be used. See Assistance
Systems for Parking or Backing
0 255.
Trailer dimensions must be in range
and transparent trailer must be
calibrated prior to use.
Transparent Trailer Setup
To complete setup for transparent
trailer:
1. Select the number of axles on
the trailer.
2. Enter trailer dimensions
.
Trailer Length: 300 cm
(118.1 in) – 970 cm
(381.8 in). Measure from
center of coupler to furthest
rear point on the trailer.
.
Trailer Width: 120 cm
(47.2 in) – 260 cm
(102.3 in). Measure from
left edge to right edge.
.
Trailer Height: 1 cm
(0.39 in) – 450 cm
(177.1 in). Measure from
ground to tallest point.
.
Hitching Point Length:
180 cm (70.8 in) – 970 cm
(381.8 in). Measure from
center of coupler to middle
of tires.
.
Trailer Tongue Length:
50 cm (119.6 in) – 220 cm
(86.6 in). Measure from
center of coupler to trailer
front wall.
.
Vehicle Hitch Height: 10 cm
(3.9 in) – 100 cm (39.3 in).
Measure from ground to top
of coupler.
.
Vehicle Hitch Length: 10 cm
(3.9 in) – 100 cm (39.3 in).
Measure from hitch receiver
to center of ball.
3. If trailer dimensions are out of
range, this feature will be
unavailable. Select OK to
return.
4. Ensure rear trailer camera is
connected.
5. Follow instructions to drive
forward to complete calibration.
Loading ...
Loading ...
Loading ...