25387050414 User Manual

Loading ...

To secure lower sash in place, attach right angle sash lock with 1/2" (12.7mm) screw as shown (FIG. 10).

NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by

window itself.

Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 11).

FIG. 10 FIG. 11

Check that air conditioner is tilted back about 1/4" to 1/2" (tilted about 2° to 4° downward to the outside, see

FIG. 12A & FIG. 12B). After proper installation, condensate should not drain from the overflow drain hole during

normal use, correct the slope otherwise.

FIG. 12A ! I

__L

H--f--_Botto m Rail

about I

1/4"_1/2"1 I

Wooden Window

FIG. 12B

INSIDE OUTSIDE

_H=H1-H2 about 1/4"~1/2 ''

-- -- ____-B

H1Tm¢ [ H ottom Rail

Vinyl-Clad Window

Trim the weather seal (6°'X3/4"X1/12 °')with a proper length,

peel off the protective backing and plug any gaps if needed

as shown FIG.13.

Removing the air conditioner From Window

Turn the air conditioner off, and disconnect power cord.

Remove sash seal from between windows, and unscrew sash lock.

Remove screws installed through frame and framelock.

Close (slide) side panels into frame.

Keeping a firm grip on air conditioner, raise sash and

carefully remove.

Be careful not to spill any condensate water while lifting

unit from window. Store parts WITH air conditioner.

FIG. 13

Loading ...

Kenmore 25387050414 room air conditioner repair and replacement parts