Loading ...
Loading ...
Loading ...
10
Plug power supply cord into a standard 3-pronged
14 Amp, 120V AC 60Hz power outlet.
After placing the food in a suitable container, open
the oven door and put it on the glass tray.
The glass tray and roller guide must always be in
place during cooking.
Close the door. Make sure that it is rmly closed.
The oven light is on when the microwave oven is
operating.
The oven door can be opened at any time during
operation by pushing the door open button of
control panel. The oven will automatically shut off.
Each time a pad is touched, a BEEP will sound to
acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ ” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CANCEL pad is touched during the
oven operation, the oven stops cooking and all
information retained. To erase all information(except
the present time), touch the STOP/CANCEL pad
If the START pad is touched and the oven does not
operate, check the area between the door and door
seal for obstructions and make sure the door is
closed securely. The oven will not start cooking until
the door is completely closed or the program has
been reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
•
The power-level is set by touching the Power pad. The chart shows the display, the power level and the
percentage of power.
O P E R A T I O N P R O C E D U R E
This section includes useful information about oven operation.
T O U C H T H E P O W E R P A D P O W E R L E v E L ( D I S P L A Y )
A P P R O x I M A T E P E R C E N T A G E O F P O W E R
once PL10 100%
twice PL9 90%
3 times PL8 80%
4 times PL7 70%
5 times PL6 60%
6 times PL5 50%
7 times PL4 40%
8 times PL3 30%
9 times PL2 20%
10 times PL1 10%
11 times PL0 0%
oven operation, all information is retained.
once more. If the oven door is opened during the
0:00
Loading ...
Loading ...
Loading ...