Loading ...
Loading ...
Loading ...
Daily Use
Troubleshooting
Caution! Before troubleshooting, disconnect the power supply. Only a qualified
electrician of competent person must do the troubleshooting that is not in this
manual.
Important! There are some sounds during normal use (compressor, refrigerant
circulation).
Appliance dose not work
Plug is not plugged in or is loose
Check fuse, replace if necessary.
Socket is defective
Malfunctions are to be corrected by
an electrician.
Problem Solution
Fuse has blown or is defective
Insert plug into socket .
Appliance freezes too much
Turn the temperature regulator to a warmer
setting temporarily.
Unusual noises
Appliance is not level.
The appliance is touching the wall or
other objects.
Re-adjust the feet.
Move the appliance slightly.
Door seal is not air-tight.
Heavy build-up of frost on
the door seal.
Temperature is not properly adjusted.
Door was open for an extended period. Open the door only as long as necessary.
A large quantity of warm food was
placed in the appliance within the last
24 hours.
Turn the temperature regulation to a colder
setting temporarily.
Possible cause
Temperature is set too cold.
Please look in the initial Temperature Setting
section.
The food is not frozen
enough.
The appliance is near a heat source. Please look in the installation location section.
A component, e.g. a pipe, on the rear
of the appliance is touching another
part of the appliance or the wall.
If necessary, carefully bend the component
out of the way.
Carefully warm the leaking sections of the door
seal with a hair dryer (on a cool setting). At the
same time shape the warmed door seal by hand
such that it sits correctly.
If the malfunction shows again, contact the dealer where you purchased the unit
or a Crosley Service Center.
These data are necessary to help you quickly and correctly. Write the necessary
data here, refer to the rating plate.