Loading ...
Loading ...
Loading ...
20
5. Reinstall hinge and latch on
opposite sides
Using a T25
®
screwdriver, reinstall the latch plate and latch
backing plate with the 3 TORX
®
screws removed earlier and
the hinge assembly with the 5 screws on the opposite sides
from which they were removed.
6. Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
7. Reinstall door on dryer
Using a T25
®
screwdriver, remove the 4 screws on the dryer.
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with the 4 T25
®
screws removed earlier.
Bottom
of door
Reverse door swing square-shaped door
1. Remove door from dryer
Using a T25
®
screwdriver, remove the 4 screws securing the
door hinge to the dryer and lift up and out to remove the door.
Place the door on a soft towel or other non-scratch surface.
Retain or set aside the 4 screws.
Loading ...
Loading ...
Loading ...