Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.
comes on.
The second phase of the
power supply is missing.
Check if the hob is correctly
connected to the electrical
supply. Remove the fuse,
wait one minute, and insert
the fuse again.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model HK764070FB PNC 949 595 123 04
Typ 60 HDD 70 AO 220 - 240 V 50 - 60 Hz
Made in Germany
Ser.Nr. ................. 7.5 kW
AEG
9.2 Cooking zones specification
Cooking zone
Nominal Power (Max heat set-
ting) [W]
Cooking zone diameter [mm]
Left front 800 / 1600 / 2300 120 / 175 / 210
Left rear 1200 145
Right front 1800 180
Right rear 1400 / 2200 170 / 265
For optimal cooking results use
cookware no larger than the diameter of
the cooking zone.
www.aeg.com16
Loading ...
Loading ...
Loading ...