Loading ...
Loading ...
Loading ...
30
Care and Cleaning
Removing and Replacing the Oven Door
The door is heavy. For safe, temporary storage,
lay the door flat with the inside of the door facing down.
To prevent possible burns, do not attempt to
remove the oven door until the oven has completely cooled.
To remove the oven door:
1. Open oven door completely, horizontal with floor
(Figure 30).
2. Pull the door hinge locks on both left and right door hinges
down from the oven frame completely toward the oven
door (Figure 31). A tool such as a small flat-blade screw-
driver may be required.
3. Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (Figure 32).
4. Close the door to approximately 10 degrees from the door
frame (Figure 32).
5. Lift the oven door hinge arms over the roller pins located on
each side of the oven frame (Figure 32).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (Figure 32).
2. Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller pins
located on each side of the oven door frame (Figure 32 and
Figure 33). The hook of the hinge arms must be fully seated
onto the roller pins.
3. Fully open the oven door, horizontal with floor (Figure 30).
4. Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the locked
position (Figure 31).
5. Close the oven door.
Important:
Special Door Care Instructions - Most oven doors contain glass
that can break. Do not close the oven door until all the oven
racks are fully in place. Do not hit the glass with pots, pans, or
any other object. Scratching, hitting, jarring, or stressing the
glass may weaken its structure causing an increased risk of
breakage at a later time.
Figure 30: Door hinge location
Figure 31: Door hinge locks
Figure 32: Holding door for removal
Figure 33: Replacement and location of hinge arm and roller
pin
Oven door
hinge
locations
L
O
C
K
about
10°
hinge
oven
door
roller
pin
hinge
arm
Loading ...
Loading ...
Loading ...