Yamaha Genos Workstation Keyboard

User Manual - Page 109

For Genos.

PDF File Manual, 140 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Genos Owner’s Manual 109
Connections—Using Your Instrument with Other Devices
Playing External Audio Devices with Genos (AUX IN jacks)
You can connect the output jacks of an external device (such as CD player, portable audio
player, tone generator, etc.) to the instrument’s AUX IN [L/L+R]/[R] jacks, letting you
hear the sound of that device through the headphones or the optional Yamaha GNS-MS01
speakers of Genos.
Using the LINE OUT SUB [3]–[4] jacks as AUX OUT jacks
You can switch the function of the LINE OUT SUB [3]–[4] jacks to AUX OUT jacks from the instrument’s display
called up via [MENU] [Line Out]. For details, refer to the Reference Manual on the website.
Do not route the output from the AUX OUT jacks to the AUX IN jacks. If you make this connection, the signal input at the AUX IN jacks is output
from the AUX OUT jacks, possibly resulting in a feedback loop that will make normal performance impossible, and may even damage the
equipment.
NOTICE
The output volume from AUX OUT jacks cannot be controlled by the MASTER VOLUME control.
NOTE
Using the [DIGITAL OUT] jack
The [DIGITAL OUT] jack has the same output signal as the LINE OUT MAIN jacks.
By using this jack, you can record the keyboard performance or Song playback of this instrument to external media
(e.g., a computer or CD recorder) with exceptionally high-quality sound—thanks to the direct digital connection.
Use this connector to output digital signals via a coaxial (RCA-pin) cable. The digital signal format is CD/DAT (S/
PDIF). This connector outputs a digital signal of 44.1 kHz/24 bit.
The output volume from the [DIGITAL OUT] jack cannot be controlled by the MASTER VOLUME control. To control the digital output volume, adjust the Digital Out
Level on the following display: (called up via [MENU] [Utility] [Speaker/Connectivity]).
NOTE
To avoid damage to the devices,
first turn on the power to the
external device, then to the
instrument. When turning off the
power, first turn off the power to
the instrument, then to the exter-
nal device.
Use only the [L/L+R] jack for connec-
tion with a monaural device.
The input signal from the AUX IN
jacks is affected by the setting of the
instrument’s [MASTER VOLUME]
dial, and the volume balance with
other parts such as entire keyboard
can be adjusted by the Mixer display
(page 86).
NOTICE
NOTE
Phone plug
(standard)
LINE OUT
Audio cable
CD player, portable audio player,
tone generator
Loading ...
Loading ...
Loading ...