Loading ...
Loading ...
Loading ...
4
How to Brew a Single-Serve Pack
w WARNING
Burn Hazard.
If overflow occurs, unplug and allow coffee maker to cool.
To avoid hot coffee overflowing:
• Fill reservoir with cup or travel mug of water into which coffee will
be brewed.
• Fully insert cup or travel mug on drip tray.
• Do not lift lid during brewing process.
• If brew process is stopped early, water must be drained from unit.
Place a large mug on drip tray/cup rest. Press BREW REG or BREW
BOLD button. Failure to drain unit can cause next cup brewed to
overflow.
w CAUTION
Cut Hazard.
Removable single-serve pack holder has a sharp needle. Piercing
needle on underside of lid also is sharp. Use caution when handling.
NOTES:
• Use only cold water in reservoir. Do not use hot water.
• Do not reheat coffee in machine.
• Do not use creamer or nondairy creamer in reservoir.
• After brewing hot cocoa single-serve packs, brew a water-only
cycle without a single-serve pack to avoid possibility of clogging
piercing needle.
• Coffee maker brews all water added.
• Press BREW REG or BREW BOLD button again to STOP brewing
midcycle. Remaining water must be removed. See warning
statement above.
• If brew indicator light flashes three times, lid is not closed. Lower
lid until it clicks to lock. Press BREW REG or BREW BOLD button.
• Do not brew coffee without removable needle holder locked into
place.
1. Plug into outlet.
2. Lift lid latch until lid clicks into place.
3. Insert funnel in opening. Place gray
removable single-serve pack holder
in funnel, aligning handle with funnel
handle.
4. Place a pack into single-serve pack
holder. Do not remove foil.
5. Close lid and snap in place to pierce
single-serve pack.
6. Lift water reservoir lid.
7. Fill cup or travel mug into which coffee
will be brewed and add water to water
reservoir. 10 oz. (296 ml) of water is
MAX amount for single-serve packs.
8. Close lid.
9. Use cup rest for a cup or mug and
remove cup rest for a travel mug.
10. Press BREW REG or BREW BOLD button
to start brewing. The brew indicator
light will light up to show that coffee
maker is brewing. The coffee maker will
shut off automatically when brewing is
complete.
11. Press BREW REG or BREW BOLD button to
turn off. Unplug.
12. Funnel and single-serve pack holder
should be rinsed after every use.
3
4
7
9
Loading ...
Loading ...
Loading ...