Loading ...
Loading ...
Loading ...
www.BISSELL.com
Operatis
Before you clean
Thoroughly sweep or vacuum floor prior to
cleaning with the PowerFresh® Pet Steam Mop.
Cleaning hard floors
Your steam mop is designed to clean hard
flooring such as ceramic tile, vinyl, laminate,
marble, stone and sealed hard wood floors. Use
of your steam mop on waxed or some unwaxed
floors may result in a diminished glossiness. The
steam mop is not for use on unsealed wood
floors. For best results test in an inconspicuous
area and check the care instructions from your
flooring manufacturer.
1. Plug the unit in and wait 30 seconds for it to
heat up. Choose the level of steam to clean your
floor: Low (delicate floors), Medium (regular
cleaning), High (durable floors or sticky messes).
Begin cleaning by slowly passing the unit over
the floor surface.
2. To sanitize an area of your floor, (attack
invisible germs and bacteria) place the
steam mop over the spot for a minimum
15 seconds using continuous steam, but no
longer than 20 seconds using continuous
steam. For larger areas, overlap swivel head
placement.
3. To thoroughly clean dried-on sticky spots
place the scrubby pad on the steam mop. Then
press and lock the Easy Scrubber brush into
place and slowly move the brush over the sticky
spot to remove.
4. To turn off the steam mop, continue to
press the Steam Level button until the blue light
is illuminated above the Steam Level button.
5. When the steam mop stops emitting steam,
unplug the unit. Simply remove the water tank,
refill, and continue steaming.
WARNING
Never put descaling, alcoholic, or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
WARNING
Tinted plates on foot may get hot while steam mop is
in use. Do not touch while hot.
8
Loading ...
Loading ...
Loading ...