Loading ...
Loading ...
Loading ...
61
ENGLISH
61
4
Remove the water tank, and if installed, remove the INTENZA+ water
lter. Pour the entire content of the Saeco decalci er.
Then ll the water tank with fresh water up to the MAX level. Press the
“ ”
button.
5
Empty the (internal) / (external) drip tray. Press the “ ” button.
6
Fill half the milk carafe with fresh water. Insert the carafe and open the
milk dispenser by turning it clockwise. Press the “
” button.
7
Place a large container (1,5 lt) under the hot water/steam wand and
milk dispenser spout of the carafe. Press the “
” button.
8
The machine will start dispensing the descaling solution at intervals.
The bar on the display shows the cycle progress.
Note:
To empty the container during the process, the descaling cycle may be
paused by pressing the “
” button. To resume the cycle, press the “ ”
button.
9
The message indicates the end of the rst step. The water tank needs
to be rinsed. Fill the water tank with fresh water up to the MAX level.
Press the “
” button.
OK
FILL TANK WITH
DESCALING SOLUTION
OK
EMPTY TRAY UNDER
BREW GROUP
OK
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
OK
PLACE A CONTAINER
UNDER HOT WATER &
CARAFE DISP SPOUT
PAUSE
STEP 1/2 DESCALING
OK
RINSE TANK &
FILL WITH WATER
Loading ...
Loading ...
Loading ...