Loading ...
Loading ...
4
5
PREPARING YOUR BLENDER
TO OPERATE BLENDER
1. Place Blender motor base on a dry, level, stable surface.
2. Set jar assembly into place on motor base.
3. Place the food solids and liquids to be blended into the jar and put the lid on the
jar before blending. Secure the lid onto the jar by snapping the Lid Lock Flaps over
the tabs on the side of the jar. See Fig. 4. Be sure the measuring cup is in place in
the middle of the lid.
4. Plug power cord into a standard 120-V, 60 Hz AC-only, 3-prong electrical outlet.
Press the On/Off button to turn on the blender controls. The blue LED will flash
0:00 for the timer, and the On/Off button words will flash.
IMPORTANT: Always rest one hand on top of blender jar with lid securely in place
when operating blender.
BLENDER FUNCTIONS
When a function button is pressed,
the function operates continuously
(except Ice Crush) at one speed for
a 1 minute cycle and then stops. Press
the button again to turn the function
off prior to 1 minute. To reactivate
the function past the 1 minute
cycle, simply repress the button.
NOTE: Once the On/Off button is pressed, the button and window display will
go out if no function button is pressed within 2 minutes.
SINGLE SERVE
Use SINGLE SERVE function only when the Single Serve Cup is inserted onto the
motor base. See USING THE SINGLE SERVE CUP section in this Use & Care Guide.
STIR, CHOP, MIX or LIQUEFY
Press the On/Off button. The button words will flash and timer will flash 0:00 in
window. Press Stir, Chop, Mix or Liquefy function button to start blender blade
rotation. Timer will count up to 1 minute and blender will stop. Press On/Off
or function button at any time during cycle to cancel operation.
CONTROL PANEL (Fig. 3)
Your blender has been designed to work
in a variety of ways to suit your blending
needs. You can easily control its blending
function by means of the control panel
buttons: Single Serve, Stir, Chop, Mix,
Liquefy, Ice Crush and Pulse
Single Serve and Pulse allow intermittent
operation. Stir, Chop, Mix and Liquefy are
continuous operation in an ascending
scale of speed from Stir (slowest) to
Liquefy (fastest). Ice Crush is fastest speed
with programmed pauses to optimize ice
crushing performance.
1. Before assembling your blender, wipe blender base with a warm sudsy cloth,
then wipe clean with a damp cloth. Dry with a soft cloth. Wash blender jar, lid,
and blades in warm, sudsy water. Rinse and wipe parts dry.
2. Align the guide ribs inside the
jar collar with the guide grooves
on the motor base and lower the
jar securely into place (Fig. 2).
OPERATING YOUR BLENDER
CAUTION: NEVER place blender motor base in water or other liquid.
WARNING: To avoid severe
cuts or amputation, NEVER
reach fingers or hands into the
blender jar once jar is secured
into place.
CAUTION: Blades are sharp. Handle carefully
Single
Serve
Stir
On/Off
Chop
Mix
Liquefy
Pulse
Ice
Crush
Single
Serve
Stir
On/Off
Chop
Mix
Liquefy
Pulse
Ice
Crush
Fig. 2
Fig. 4
Fig. 3
Guide
Groove
Loading ...
Loading ...