Loading ...
Loading ...
DETAILED PLANNING DIMENSIONS
IMPORTANT: Dimensional specications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Whirlpool
®
appliances are appropriately UL, CUL or CSA approved.
3 of 3
15" ICE MACHINES
WUI75X15H/ WUI95X15H– D 24" x W 14
5
⁄8" x H 33
49
⁄64" (depth without handle)
OPENING/CLEARANCE DIMENSIONS
F
A
e
w
B
G
I
C
D
H
EE
FRONT VIEW
J
Wall
N
P
O
M
K
L
BACK VIEW
SIDE VIEW
MODEL # WUI75X15H, WUI95X15H
in cm
A*
Width (min.) 15 38.1
Width without hinge side spacer option
(min.)
15 38.1
Width with hinge side spacer option (min.) 15
3
⁄4 40.0*
B* Width of outlet location 6 15.0
C* Outlet location – distance from side 1 2.5
D* Width of water connection location 3
1
⁄2 8.9
E
Minimum width from hinged side of ice
machine to xed wall – door open 90°
2 5.1
Minimum width from hinged side of ice
machine
to xed wall – door fully open 180°
13
1
⁄4 33.7
Minimum width from hinged side of ice
machine
to xed wall – door fully open 118°
6
7
⁄8 17.4
F Height (min.) 34 86.4
G Height of outlet location 8 20.3
H Height of water connection location 9 22.9
I Outlet location – distance from bottom 12 30.5
J Depth of cabinet (min.) 24 61.0
K Water line location – distance from side 2
39
/64 6.64
L Power supply – distance from side 3
49
/64 9.57
M Drain hose – distance from side 7
5
/16 18.57
N Power supply – distance from bottom 1
1
/4 3.17
O Drain hose – distance from bottom 2
43
/64 6.79
P Water line location – distance from bottom 14
7
/32 36.12
e
Recommended electrical connection
location
w Recommended water connection location
* Install 3⁄4" (1.9 cm) front hinge-side spacer ush with face of adjacent cabinet and
3⁄4" (1.9 cm) back hinge-side spacer 6" (15.2 cm) from back wall.
ELECTRICAL REQUIREMENTS
115 V, 60 Hz, AC only, 15 or 20 A fused, grounded circuit is
required. A dedicated circuit is recommended. Use an outlet that
cannot be turned off by a switch. Do not use an extension cord.
WATER PRESSURE REQUIREMENTS
A cold water supply with water pressure between
30 and 120 psi (207 and 827 kPa) is required to operate the ice
maker. Call a licensed, qualied plumber with any questions
about the water pressure.
Reverse Osmosis Water Supply
IMPORTANT: The use of a reverse osmosis system with this
product is not recommended. However if you do use reverse
osmosis, follow these instructions.
IMPORTANT: The pressure of the water coming out of a reverse
osmosis system going to the water inlet valve of the ice machine
needs to be between 30 and 120 psi (207 and 827 kPa). If a
reverse osmosis water ltration system is connected to the cold
water supply, the water pressure to the reverse osmosis system
needs to be a minimum of 40 to 60 psi (276 to 414 kPa).
Floor
03/19
W11349808A
®
/™ ©2019 Whirlpool. All rights reserved.
19-Mar-2019 01:02:58 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")