Loading ...
Loading ...
Loading ...
English
23
Network: Advanced: Email Settings
If you want the DVR to occasionally drop you a line, share
news, tell you about its day and - more importantly - tell you
what’s going on around your home or business as it happens,
then you can congure it to automatically send email alerts as
events happen.
We suggest using Gmail as your email client - it’s quite easy
to set up an account and use it solely for the DVR. We’ve
tested the email procedure with Gmail, and it does work.
Other email servers may not work correctly - many
interpret the procedurally generated email from the DVR
as spam and block the mail from being sent.
For the Auto-Mail function to work correctly, the DVR will need
to be correctly congured with the details of the email servers
and addresses you want to use.
Enable SSL or TSL: Whether the email server you’re using
requires a secure link. This is on be default, and should be left
on if you’re using any of the preset email servers.
SMTP Server: There are three preset options to choose from,
Gmail (smtp.gmail.com), Windows Live Mail (smtp.live.com)
and Yahoo Mail (smtp.mail.yahoo.com).
You’ll need to setup an account with one of these email
providers. All oer free email accounts. To signup, visit the
email provider’s website:
Gmail (Google): www.gmail.com
Yahoo Mail: mail.yahoo.com
Windows Live Mail: www.hotmail.com
You can use any email server you like if you tick the box labeled
“Other”. You’ll have to dene the email server you’d like to use
manually, and you’ll need to know details about the server,
such as the SMTP port they use, as well as whether they use
SSL or TLS security protocols. Contact your email provider if
you need to learn this information.
We recommend using one of the presets, and can oer better
support for users and the DVR will automatically adjust some
settings (such as the SMTP port number) to make conguration
signicantly easier.
SMTP Port: The SMTP port used by the email provider of your
choice. This eld will automatically self-populate if you use
one of the presets.
Sender Address: The address you’re sending the email from.
This will be the username you’ve set up for the email server
you’re using, followed by “@” and then the email server. For
example: “[email protected]om” or similar.
Sender Password: The password for the outgoing email
account.
Recipient Address: The email address you want the DVR to
send emails to. This can be any email address you like, however,
bear in mind that the DVR might send a large number of
automatic emails under certain conditions.
Attach Picture: While this is selected, the DVR will attach a
small image to each email alert (where applicable).
For motion-based email alerts, this will be an image of
whatever triggered the motion detection.
Interval: The length of time that must elapse after the DVR
sends an email alert before it will send another.
Short Interval settings are likely to lead to huge numbers of
alerts being sent by the DVR - perhaps even several emails
for one event (if that one event lasts longer than the interval
setting). On the other hand, a long interval setting might
mean you’ll miss a specic update that you needed. There’s no
right answer, and you’ll probably have to ne-tune this setting
to get the results you’re after - it’ll be dierent for everyone’s
unique circumstances.
Loading ...
Loading ...
Loading ...