Loading ...
Loading ...
Loading ...
8
Select a Cycle (cycles vary by model)
Press and hold the desired cycle button until the corresponding
light is on.
NOTE: Heavier cycles and options affect cycle length. Some
cycles and options will take up to 3¹⁄₂ hours to complete.
SENSOR - The Sensor wash cycle senses the load size, soil
amount, and toughness of soil to adjust the cycle for optimal
cleaning, using only the amount of water and energy
needed.
HEAVY
– Use for heavily soiled, hard-to-clean items.
NORMAL – This cycle is recommended to completely wash a full
load of normally soiled dishes. Selecting this cycle will default to
the options recommended for normal amounts of food soil. The
energy label is based on this cycle.
ECO – Use for lightly soiled items. It saves energy.
1 HOUR – Use for lightly soiled items. For fast results, 1 Hour
wash will clean the dishes using slightly more water and energy.
LIGHT – Use for lightly soiled items or china and crystal.
Select Options (options vary by model)
You can customize your cycles by pressing the options desired.
HI TEMP – Raises the main wash temperature to improve cleaning
for loads containing tough, baked-on food.
SANI RINSE – Can be selected with Heavy, Sensor, and Normal
wash cycles. Select this option to raise the water temperature in
the final rinse to approximately 155°F (68°C). Sani Rinse option
adds heat and time to the cycle. This high temperature rinse
sanitizes your dishes and glassware in accordance with NSF/ANSI
Standard 184 for Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food establishments.
TOP RACK WASH - Can be selected with any cycle for washing
a small load of dishes in the top rack.
HEAT DRY/HEAT DRY HIGH – Can be selected with 1 Hour , Heavy,
Sensor, and Normal wash cycles. When selected with the 1-Hour
Wash cycle, the time is increased by approximately 30 minutes.
HEAT DRY ECO - Can be selected with 1 Hour, Heavy,
Sensor, and Normal wash cycles for shorter heated dry
times and to use less energy.
DELAY WASH – Can be selected with any cycle. Offers the choice
to start the dishwasher automatically at a later time. Select a wash
cycle and options. Press DELAY WASH. If your model has a 2-4-8
option, repeatedly press the Delay Wash button until the desired
delay time is selected. Press START/RESUME. Close the door
firmly.
CONTROL LOCK – Use to avoid unintended use of your
dishwasher. When Control Lock is lit, all buttons are disabled. The
dishwasher door can be opened while the controls are locked.
To turn on Control Lock:
Press and hold CONTROL LOCK for at least 3 seconds. The light
glows. If you press any pad while your dishwasher is locked, the
light flashes 3 times.
To turn off Control Lock:
Press and hold CONTROL LOCK for at least 3 seconds. The
Control Lock light turns off.
Start or Resume a Cycle
■ Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
■ If the Start/Resume button is located on
top of door, push door firmly closed within
3 seconds of pressing START/RESUME. If
door is not closed within 3 seconds, the
start button LED will flash, an audible tone
will be heard, and cycle will not start.
IMPORTANT: If anyone opens the door (such
as, for adding a dish, even during the Delay Hours option), the
START/RESUME button must be pressed each time.
■ If your Start/Resume button is located on front of door, push
door firmly closed. The door latches automatically. Select the
wash cycle, options and press START/RESUME or press
START/RESUME to repeat the same cycle and options as in
previous wash cycle.
■ You can add an item anytime before the main wash starts.
Open the door slowly and add the item. Close the door firmly.
Press START/RESUME.
■ The Clean indicator glows when the cycle is finished. Sanitized
glows when Sani Rinse option is selected and sanitization
levels occur.
STEP 3
STEP 4
Loading ...
Loading ...
Loading ...