Loading ...
Loading ...
Loading ...
REFRIGERATOR INSTALLATION
16
Replacing Refrigerator Door:
❿ Right Door
• Lower the door onto middle hinge pin (9).
• Fit top hinge (7) over hinge lever latch (8) and into place. Rotate lever (6) counterclockwise to secure hinge.
• Install the grounding screw (5) and connect wire harnesses (4).
• Hook tab on door switch side of cover under edge of wire opening in cabinet top.
Position cover (2) into place. lnsert and tighten cover screw (1).
❿ Left Door
• Lower the door onto middle hinge pin (9).
• Fit top hinge (7) over hinge lever latch (8) and into place. Rotate lever (6) clockwise to secure hinge.
• Install the grounding screw (5) and connect the three wire harnesses (4).
• Push the water supply tube into the hole on the top case and pull it out on the backplate.
• Insert the water supply tube (3) into the connector tube until you see only one scale mark.
(Fully insert the tube over 5/8”(15mm)).
• Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top.
Position cover into place. Insert and tighten cover screw (1).
9
9
Correct
Incorrect
Loading ...
Loading ...
Loading ...