Loading ...
Loading ...
Loading ...
9
English
3 Press and hold until the LED starts
breathing white and blue alternately.
The headset is in pairing mode, which »
lasts ve minutes.
4 Pair the headset with the mobile phone.
For details, refer to the user manual of the
mobile phone.
A sample pairing is shown below.
1 Under Bluetooth menu on the mobile
phone, search for the headset.
2 On mobile phones using Bluetooth
2.1+EDR or higher, you do not need to
enter a pass code.
3 From the found devices, select Philips
SHB9100.
Enter “• 0000” (4 zeros), if prompted to
enter the pin code of the headset.
Settings
Select
Back
Connectivity
10:37
Enter Password
****
0000
Settings
Bluetooth
Select
Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Devices Found
Select
Back
10:36
Philips SHB6000
Settings
Select
Back
Connectivity
10:37
Enter Password
****
0000
Settings
Bluetooth
Select
Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Devices Found
Select
Back
10:36
Philips SHB9100
3 Get started
Charge the headset
Warning
Before you use your headset for the rst time, charge •
the battery for four hours for optimum battery capacity
and lifetime.
Use only the original USB charging cable to avoid any •
damage.
Finish your call before charging the headset, as •
connecting the headset for charging will power off the
unit.
You can operate the headset normally during charge. •
Plug the headset into a powered USB port with
USB charging cable.
LED turns white during charge and »
turns off when the headset is fully
charged.
Tip
Typically, a full charge takes three hours. •
Pair the headset with your
mobile phone
Before you use the headset with a mobile
phone for the rst time, pair it with the mobile
phone. A successful pairing establishes a unique
encrypted link between the headset and the
mobile phone. The headset stores the last eight
links in the memory. If you try to pair more than
eight devices, the link for the earliest paired
device is overwritten.
1 Ensure that the mobile phone is turned on
and its Bluetooth feature is activated.
2 Ensure that the headset is charged and
turned off.
EN
Loading ...
Loading ...
Loading ...