Loading ...
Loading ...
Loading ...
When you believe your system is not operating properly
The main function of the tire pressure monitoring system is to warn you
when your tires need air. It can also warn you in the event the system is
no longer capable of functioning as intended. See the following chart for
information concerning your tire pressure monitoring system:
Low tire
pressure
warning light
Possible cause Customer action required
Solid warning
light
Tire(s)
under-inflated
1. Make sure tires are at the proper
pressure. See Inflating your tires
in this chapter.
2. After inflating your tires to the
manufacturer’s recommended
pressure as shown on the Tire
Label (located on the edge of
driver’s door or the B-Pillar), the
vehicle must be driven for at least
two minutes over 20 mph
(32 km/h) before the light turns
off.
Wheel and tire
swap without
training
Train the sensors to the vehicle.
See the TPMS Training procedure
in this section.
TPMS
malfunction
If the tires are properly inflated
and installed and trained, and the
light remains on, contact your
authorized dealer as soon as
possible.
Flashing
warning light
Wheel and tire
swap without
training
Train the sensors to the vehicle.
See the TPMS Training procedure
in this section.
TPMS
malfunction
If the tires are properly inflated,
but the light remains on, contact
your authorized dealer as soon as
possible.
Wheels and Tires 281
2015 Police (pol)
Owners Guide gf, 1st Printing, April 2014
USA (fus)
Loading ...
Loading ...
Loading ...