Loading ...
Loading ...
Loading ...
34
HOW TO USE
ENGLISH
Ice and Water Dispenser
Depending on the model, some of the
following functions may not be available.
CAUTION
Keep children away from the dispenser
to prevent them from playing with or
damaging the controls.
Dispenser
Support
Using the Dispenser
1
Press on the Water, Cubed, or Crushed
text above the dispenser switch to select
from water, cubed ice, or crushed ice.
2
Press a glass against the ice and water
switch to start dispensing.
NOTE
y
If discolored ice is dispensed, check
the water filter and water supply. If the
problem continues, contact a qualified
service center. Do not use the ice or
water until the problem is corrected.
y
The dispenser will not operate when
either of the refrigerator doors are open.
y
If dispensing water or ice into a container
with a small opening, place it as close to
the dispenser as possible.
y
Some dripping may occur after
dispensing. Hold your cup beneath
the dispenser for a few seconds after
dispensing to catch all of the drops.
CAUTION
Throw away the first few batches of ice
(about 24 cubes). This is also necessary
if the refrigerator has not been used for
a long time.
Cleaning the Dispenser Tray
1
Pull the tray forward until it stops.
2
Place hands underneath the tray and
gently pull the tray forward to pop it off the
support.
3
The dispenser tray and support can easily
become wet or dirty. Remove the tray
periodically and clean it and the support
with a damp dishcloth. Dry off the tray and
the support before reinstalling the tray.
Ice and Water
switch
Locking the Dispenser
Press and hold the Lock button for three
seconds to lock the dispenser and all of the
control panel functions. Follow the same
instructions to unlock.
Loading ...
Loading ...
Loading ...