Loading ...
Loading ...
Loading ...
"Off": with this setting, no warning is output.
The setting is stored for the driver profile cur‐
rently used.
Setting the intensity of the steering
wheel vibration
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Steering wheel vibration"
4. Select the desired setting.
The setting is applied to all Intelligent Safety sys‐
tems and stored for the driver profile currently
used.
Vehicles with side collision
mitigation: switching steering
intervention on/off
The steering intervention can be switched on
and off separately for blind spot collision warning
and lane departure warning.
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Intelligent Safety"
4. "Steering intervention"
The setting is stored for the driver profile cur‐
rently used.
Warning function
Light in the exterior mirror
Prewarning
The dimmed light in the exterior mirror indicates
when there are vehicles in the blind spot or ap‐
proaching from behind.
Acute warning
When the turn signal is switched on while a vehi‐
cle is in the critical zone, the steering wheel vi‐
brates briefly and the light in the exterior mirror
flashes brightly.
The warning stops when the other vehicle has
left the critical area or the turn signal has been
deactivated.
With side collision mitigation
When at speeds between 45 mph/70 km/h and
130 mph/210 km/h the vibrating steering wheel
is ignored and the lane marking crossed, the sys‐
tem intervenes with a brief active steering inter‐
vention. The steering intervention helps return
the vehicle into the lane. The steering interven‐
tion can be noticed on the steering wheel and
can be manually overridden at any time.
Flashing of the light
A flashing of the light during vehicle unlocking
serves as system self-test.
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi‐
tions or other factors, the system may not re‐
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this Own‐
er’s Manual regarding the scope of the sys‐
tem’s operation and limitations.
Seite 178
CONTROLS
Safety
178
Online Edition for Part no. 01405A10E93 - VI/20
Loading ...
Loading ...
Loading ...