Loading ...
Loading ...
Loading ...
21
Self-Clean Cycle
1. Close the door completely.
2. Turn the oven selector knob clockwise to the “SELF CLEAN” mode.
3. Turn the temperature control knob to the clean setting stop. At this time, the clean indicator light will come on. Within 30 seconds
the automatic door latch engages and the oven indicator light comes on. The oven indicator light will remain on until the oven
reaches the self-clean temperature and will then cycle on and off during the self-clean cycle.
4. The clean indicator light will remain on until the self-clean is completed or interrupted and the oven temperature drops to a safe
temperature. A complete cycle is approximately 2-1/2 hours with an additional 30 minutes needed for the oven to cool down
enough for the door latch to disengage.
Note: A fan noise will be heard during the self-clean cycle and will continue to run for the 2-1/2 hour duration of the self-clean cycle.
5. When the cycle is completed, turn both the oven selector and temperature control knob to the “OFF” position. When the oven has
completely cooled, open door and remove any ash from the oven surfaces with a damp cloth.
To stop the Self-Clean cycle:
To cancel or interrupt the self-cleaning cycle, turn both the temperature control knob and the oven function selector knob to “OFF”.
When the oven temperature drops to a safe temperature, the automatic door latch will release and the oven door can be opened.
When the oven has completely cooled, remove any ash from the oven surfaces with a damp sponge or cloth.
Replacing Oven Lights
1. Unsnap glass light cover using a screwdriver in the access
groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage requirements
listed on glass cover.
4. Replace the light cover by snapping glass cover onto metal box.
5. Reconnect power at the main fuse or circuit breaker.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or
circuit breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any signs of oil
from the bulb and handle with a soft cloth.
access
groove
light
bulb
glass light
cover
Loading ...
Loading ...
Loading ...