Loading ...
Loading ...
Loading ...
6 49-4000102 Rev 1
Getting started
USING THE DISHWASHER
Select Options
The light by the selected pad will be lit to indicate which Option has been selected.
Temp/Boost
(on some
models)
This option increases the temperature to help clean heavily soiled dishes and may increase
the overall cycle time. Option may be turned on or off during the wash cycle. Wash temp also
increases the final rinse temperature which can improve dry performance.
Dry/Dry
Boost
Off - Shuts off the drying option. Dishes air dry naturally and energy is saved. Open the
dishwasher door to speed drying.
Normal -Turns on the option for faster drying. This option may extend the time to your wash
cycle up to 64 minutes. This option is not available with the Rinse cycle.
Ultra/Extra/High (on some models) - This option can be selected by pressing the Dry/Dry Boost
pad twice to illuminate the Ultra/Extra/High/Boost light. It will add additional time to your drying option,
further enhancing the dishwasher’s performance for difficult to dry items.
Steam-Sani/
Presoak-Sani/
Sanitize
(on some
models)
This option raises the water temperature in the final rinse to sanitize your dishware and improve
dry performance. The cycle length will vary depending on the temperature of your inlet water.
NOTE: This option is monitored for sanitization requirements. If the cycle is interrupted during
or after the main wash portion or if the incoming water temperature is so low that adequate
water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the
Sanitized light will not illuminate at the end of the cycle. Utilizing this option will modify the cycle
to meet the requirements of Section 6, NSF 184 for soil removal and sanitization efficacy.
NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.
Delay Hours/
Delay
(on some
models)
Delays the start of a wash cycle up to 12 hours depending on model. Press Delay Hours/Delay,
to select the number of hours, then press Start one time to begin countdown. The cycle will start
once allotted time has expired.
Lock
Controls
You can lock the controls to prevent selections from being made. You can also lock the
controls after you have started a cycle to prevent cycle changes. For example, children cannot
accidentally start the dishwasher by pressing pads with this option selected.
To LOCK/UNLOCK the dishwasher control, depending on the model, press and hold the
Select Cycle pad or the Dry/Dry Boost pad or the Steam-Sani/Presoak-Sani/Sanitize pads at
the same time for 3 seconds. The Lock Controls light will turn on to indicate the control is locked
and will turn off to indicate the control is unlocked.
5
Start Dishwasher
Start Door can be open to select the desired options. Press the Start pad and close the door within 4
seconds to start the cycle or begin the Delay Hours/Delay countdown. The wash cycle will begin
shortly after closing the door. If the door is open, the illuminated lights will turn off if a pad is not
pressed within two minutes. To activate the display, close and open the door or press any pad.
Interrupt or
Pause
To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
cycle to pause. The dishwasher will beep every minute to remind you to close the door. To
restart or resume the cycle, press Start, and close the door within 4 seconds.
Cancel To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door. The
dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
6
Cycle Indicator Lights and Sounds
Sanitized
(on some
models)
Displayed at end of the cycle when Steam-Sani/Presoak-Sani/Sanitize has been selected and the
dishwasher has met the requirements for sanitization. See Steam-Sani/Presoak-Sani/Sanitize for
complete description. Opening door or pressing any pad while door is closed will turn the light off.
Clean Displayed when a wash cycle is complete. The light stays on as a reminder that the dishes are
clean. Opening the door or pressing any pad while the door is closed will turn the light off.
Sabbath/
Door
Wake
Up Mode
(on some
models)
To turn this option on/off, press and hold the Start and Temp/Boost pads for 5 seconds, close
the door and wait 3 minutes for the dishwasher to go into sleep mode. In the off mode, the control
display, control sounds, and interior lights will not respond to the door opening/closing. This mode
can be used when observing certain religious holidays such as the Sabbath. To activate the control
and interior lights, press any pad.
7
Loading ...
Loading ...
Loading ...