User Manual Toyota Camry SE Nightshade Edition 2020 Car

• Owner's manual - (English)

User manual Car for Toyota Camry SE Nightshade Edition 2020

Table of contents 

• For your information
• Reading this manual
• How to search
• Pictorial index
• For safe use
• Before driving
• For safe driving
• Seat belts
• SRS airbags
• Front passenger occupant classification system
• Exhaust gas precautions
• Child safety
• Riding with children
• Child restraint systems
• Emergency assistance Safety Connect
• Theft deterrent system Engine immobilizer system
• Alarm
• Instrument cluster
• Warning lights and indicators
• Gauges and meters
• Multi-information display (4.2-inch display)
• Multi-information display (7-inch display)
• Head-up display
• Fuel consumption information

Using the mechanical key (vehicles with a smart key system)

• To take out the mechanical key, slide the release lever and take the key out.
• The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and re- attempt to insert it.
• After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key bat- tery is depleted or the entry function does not operate properly, you will need the mechanical key. (P. 530)

Opening the fuel tank cap

• Press and hold the opener switch to open the fuel filler door.
• Turn the fuel tank cap slowly to remove it and hang it on the back of the fuel filler door.

Buzzer operation and distance to an object

A buzzer sounds when the sensors are operating.

• The buzzer sounds faster as the vehicle approaches an object. When the vehicle comes within the following distance of the object, the buzzer sounds continuously: Approximately 1.2 ft. (35 cm).
• When 2 or more objects are detected simultaneously, the buzzer system responds to the nearest object. If one or both come within the above distances, the beep will repeat a long tone, followed by fast beeps.

Changing the buzzer sounds volume

• Vehicles without a smart key system: The buzzer volume can be changed on the multi-information display (→P. 114) when the engine switch is in the “ON” position.
• Vehicles with a smart key system: The buzzer volume can be changed on the multi-information display (→P. 114) when the engine switch is in the IGNITION ON mode.

Sensor detection information

• The sensor’s detection areas are limited to the areas around the vehicle’s bumper.
• Depending on the shape of the object and other factors, the detection dis- tance may shorten, or detection may be impossible.
• Objects may not be detected if they are too close to the sensor.
• There will be a short delay between object detection and display. Even at slow speeds, there is a possibility that the object will come within the sen- sor’s detection areas before the display is shown and the buzzer sounds.
• Thin posts or objects lower than the sensor may not be detected when approached, even if they have been detected once.
• It might be difficult to hear beeps due to the volume of audio system or air flow noise of the air conditioning system.