Loading ...
Loading ...
INSTALLATION
REQUIREMENTS
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.
All Installations
Tools needed:
Phillips
screwdriver
5/16"and W'
nut drivers or
hex sockets q
Measuring tape
or ruler
10" adjustable wrench
that opens to .._//'=_"
1W' (2.9 cm)
Flat-blade
screwdriver
Utility knife
UL Listed/CSA
Approved twist-on _ _
wire connectors*
Small level
%" open-end
wrench
*Must be the proper size to connect your household wiring
to 16-gauge wiring in dishwasher.
Other useful items you may need:
[FlaShlight __th _--_!
tPan %-_ _owel -'%_ J
Parts supplied:
Drain hose _: : i - :-
Dram #10 x ½ 2 - under,
damps (2)hose PhillipsLhead counter
mounting
(1 large and screws (2)brackets
Make sure all these parts are included in the literature package.
t®TORX is a registered trademark of Saturn Fasteners, Inc.
Parts needed:
%" Compr x 3,4"hose
fitting, Contact your local
Sears Store to purchase
Kit Number 11000.
Other parts you may also need:
[1V2.2 _1 Masking Or
1(3,8!-5 cm)I_ _!]lducttap e
I Screw-tYP e [
[ clamps (3 maximum)I
NOTE: Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
"Electrical Requirements" section. It is recommended that
electrical connections be made by a licensed electrical installer.
In addition, for first-time installations
Toolsneeded:
V_
and
saw bits
small
tubing cutter wire strippei
Parts needed:
copper tubing (%" See "Electrical Requirements" sectionl
O.D.suggested) or
flexible braided For Direct Wwe: For Power Supp y
water suanlv line use UL Listed/ Cord: use UL
CSA Appr0ved ListediCSA
] strain !elief Approved power
ttkt kt, Itofit %' (2'2 cm) supply Cord kit
I marked for use with
dishWaSher
Loading ...
Loading ...
Loading ...