LG Electronics LGUX390 Mobile Phone with Push-to-Talk, Web User Manual

IMPORTANT SAFETY PRECAUTIONS

Read these instructions. Breaking the rules may be dangerous or illegal.

Further detailed information is given in this user guide.

WARNING!

Violation oof tthe iinstructions mmay ccause sserious iinjury oor ddeath.

1. Never use an unapproved battery since this could damage the phone and/or battery and could

cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than -4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If

wireless equipment is improperly installed and the air bag is deployed, you may be seriously

injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

UX390_Eng.qxd 7/7/06 6:00 PM Page 1

IMPORTANT SAFETY PRECAUTIONS

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high

humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean

your phone. This could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the

phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if

it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as

it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric

shock or seriously damage your phone.

8. Do not disassemble the phone.

UX390_Eng.qxd 7/7/06 6:00 PM Page 2

IMPORTANT SAFETY PRECAUTIONS

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or

cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the

battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection

parts of the phone, etc.) This could cause asphxiation or suffocation resulting in serious injury

or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to

products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or

service may result in accidents and consequently invalidate the warranty.

9. An emergency call can be made only within a service area. For an emergency call, make sure that

you are within a service area and that the phone is turned on.

UX390_Eng.qxd 7/7/06 6:00 PM Page 3

TABLE OF CONTENTS

Important Safety Precautions 1

Table of Contents 4

Welcome 9

Technical Details 10

FCC RF Exposure Information 11

Phone Overview 12

Menus Overview 14

Getting Started with Your

Phone 16

Menu Access 16

The Battery 16

Installing the Battery 16

Removing the Battery 16

Charging the Battery 17

Battery Charge Level 17

Turning the Phone On and Off 17

Turning the Phone On 17

Turning the Phone Off 17

Signal Strength 17

Screen Icons 18

Making Calls 19

Correcting Dialing Mistakes 19

Redialing Calls 19

Receiving Calls 19

Quick Access to Convenient

Features 20

Manner Mode 20

Lock Mode 20

Mute Function 20

Volume Quick Adjustment 20

Call Waiting 21

Caller ID 21

Speed Dialing 21

Entering and Editing

Information 22

Text Input 22

Key Functions 22

Text Input Examples 23

Using Abc (Multi-tap) Text Input 23

Using T9 Mode Text Input 23

Using the NEXT Key (In T9 Mode) 24

Adding Words to the T9 Database 24

Contacts in Your Phone’s

Memory 25

The Basics of Storing Contacts

Entries 25

Options to Customize Your

Contacts 26

Adding or Changing the Group 26

Changing the Call Ringer 26

Changing the Message Ringer 27

Adding or Changing the Memo 27

Adding or Changing the Picture ID 27

UX390_Eng.qxd 7/7/06 6:00 PM Page 4

TABLE OF CONTENTS

Adding Speed Dial 28

Editing Contacts Entries 28

Adding Another Phone Number 28

From standby mode 28

Through Contacts 28

Default Numbers 29

Changing the Default Number 29

Editing Stored Phone Numbers 29

Editing Stored Names 29

Editing Customized Options 30

Deleting 30

Deleting a Phone Number from a

Contact 30

Deleting a Contact Entry 30

Additional Ways to Delete a Contact 31

Deleting a Speed Dial 31

Phone Numbers With Pauses 31

Storing a Number with Pauses 32

Adding a Pause to an Existing

Number 32

Searching Your Phone’s Memory 33

Scrolling Through Your Contacts 33

Searching by Letter 33

Searching Options 33

Making a Call From Your Phone’s

Memory 34

From Contacts 34

From Recent Calls ( as a hot key)35

Speed Dialing 35

Prepending a Stored Number 35

Contacts 36

1. List Contacts 36

2. New Number 37

3. New E-mail 37

4. Groups 37

5. Speed Dials 38

6. My Contact Info 38

Recent Calls 39

1. Dialed Calls 39

2. Received Calls 40

3. Missed Calls 40

4. Erase Calls 40

5. Call Timer 40

6. KB Counter 41

Messages 42

1. Voice Mail 43

2. New Text Msg 44

The Basics of Sending a

Text Message 44

Customizing the Text Message Using

Options 44

Using Contacts to Send a

Text Message 45

Text Options 45

Message Icon Reference 46

3. New Photo Msg 46

4. Inbox 47

5. Outbox 49

6. Saved 50

7. Msg Settings 50

UX390_Eng.qxd 7/7/06 6:00 PM Page 5

TABLE OF CONTENTS

7.1 Auto Save 50

7.2 Auto Erase 50

7.3 Photo-Auto Receive 50

7.4 Callback # 50

7.5 Signature 50

7.6 Voice Mail # 51

7.7 Text Auto View 51

7.8 Entry Mode 51

7.9 Insert Quick-Text 51

7.0 Text Auto Play (On/ Off) 51

8. Erase All 51

SpeedTalk

Call from SpeedTalk

Contact

List (Barge) 53

Call from SpeedTalk

Contact

List (Alert) 53

Call from SpeedTalk

Contact

List (Group) 54

Call from Keypad (Barge) 54

Incoming SpeedTalk

(Barge)

Incoming SpeedTalk

(Alert) 55

Incoming SpeedTalk

(Group)

1. SpeedTalk

Contacts 56

2. New SpeedTalk

Contact 57

3. New SpeedTalk

Group 57

4. Recent SpeedTalk

5. SpeedTalk

Settings 57

5.1 SpeedTalk

On/Off 57

5.2 Speaker On/Off 58

5.3 SpeedTalk

Alert Tone 58

easyedge

1. easyedge 60

2. Help 60

Media 61

1. Images 61

2. Sounds 61

Tools 62

1. Schedule 62

2. Alarm Clock 63

3. Voice Memo 64

4. My Shortcut 64

5. Notepad 64

6. Ez Tip Calc 65

7. Calculator 65

8. World Clock 66

Settings 67

1. Sounds 67

1.1 Ringers 67

1.2 Key Tone 67

1.3 Volume 68

1.4 Message Alerts 68

1.5 Service Alerts 68

1.5.1 Service Change 68

1.5.2 Minute Beep 68

UX390_Eng.qxd 7/7/06 6:00 PM Page 6

TABLE OF CONTENTS

1.5.3 Call Connect 68

1.5.4 Back To Top 68

1.6 Power On/Off Tone 69

1.7 DTMF Length 69

2. Display 69

2.1 Banner 69

2.2 Backlight 69

2.2.1 LCD 69

2.2.2 Key Light Timer 70

2.3 Screens 70

2.4 Menu Style 70

2.5 Clocks 70

2.6 Theme Colors 70

2.7 Contrast 71

2.8 Fonts 71

2.8.1 Calling Digits 71

2.8.2 Text Editor 71

2.9 Language 71

2.0 Power Saver 72

3. System 72

3.1 Select System 72

3.2 Set NAM 72

3.3 Auto NAM 72

3.4 Serving System 72

4. Security 73

4.1 Lock Phone 73

4.2 Restrict Calls 73

4.3 Emergency #s 74

4.4 Change Lock 74

4.5 Erase Contacts 74

4.6 Reset Default 74

5. Call Setup 75

5.1 Auto Retry 75

5.2 Answer Call 75

5.3 Auto Answer 75

5.4 One-Touch Dial 75

5.5 Voice Privacy 76

5.6 Auto Volume 76

5.7 TTY Mode 76

5.8 Airplane Mode 76

6. Data Settings 77

6.1 PC Connection 77

7. Voice Services 77

7.1 Voice Commands 77

7.2 Sound Modes 78

7.3 Announce Alerts 78

7.4 Best Match 78

7.5 Train Words 79

7.6 Help 79

8. Location 79

Phone Info 80

1. My Phone Number 80

2. S/W Version 80

3. Icon Glossary 80

4. Shortcut Help 80

UX390_Eng.qxd 7/7/06 6:00 PM Page 7

TABLE OF CONTENTS

Safety 81

TIA Safety Information 81

Exposure to Radio Frequency Signal 81

Antenna Care 81

Phone Operation 81

Tips on Efficient Operation 82

Driving 82

Electronic Devices 82

Pacemakers 82

Persons with pacemakers: 82

Hearing Aids 83

Other Medical Devices 83

Health Care Facilities 83

Vehicles 83

Posted Facilities 83

Aircraft 83

Blasting Areas 83

Potentially Explosive Atmosphere 84

For Vehicles Equipped with an

Air Bag 84

Safety Information 84

Charger and Adapter Safety 84

Battery Information and Care 84

Explosion, Shock, and Fire Hazards 85

General Notice 85

Avoid damage to your hearing 86

FDA Consumer Update 87

10 Driver Safety Tips 94

Consumer Information on

SAR 96

FCC Hearing-Aid Compatibility

(HAC) Regulations for Wireless

Devices 97

Accessories 100

Limited Warranty Statement 101

Index 104

Some of contents in this user guide maybe different from your phone

depending on the software of the phone or your service provider. Features

and specifications might be subject to change without prior notice.

UX390_Eng.qxd 7/7/06 6:00 PM Page 8

WELCOME

Thank you for choosing the advanced and compact

UX390 cellular phone, designed to operate with the

latest digital mobile communication technology, Code

Division Multiple Access (CDMA) and Advanced

Mobile Phone Service (AMPS). Along with the many

advanced features of the CDMA system, such as

significantly enhanced voice clarity, this phone offers:

●

SpeedTalk

Capability.

●

Large, easy-to-read, 9-line backlit LCD with status

icons

●

Paging, messaging, voice mail, and caller ID.

●

22-key keypad.

●

Speakerphone feature.

●

Menu-driven interface with prompts for easy

operation and configuration.

●

Any key answer, auto answer, auto retry, one-touch

and speed dialing with 99 memory locations.

●

Bilingual (English and Spanish) capabilities.

●

Advanced Voice Recognition.

●

Animated Wallpaper in Standby Mode.

Important Information

This user’s guide provides important information on

the use and operation of your phone. Please read all

the information carefully prior to using the phone for

the best performance and to prevent any damage to

or misuse of the phone. Any unapproved changes or

modifications will void your warranty.

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of

FCC rules. Operation is subject to the following two

conditions: (1) This device and its accessories may not

cause harmful interference, and (2) this device and its

accessories must accept any interference received,

including interference that causes undesired operation.

Technical Details

The UX390 is an a tri-mode phone that operates on

both (Code Division Multiple Access CDMA)

frequencies: cellular services at 800 MHz and (Personal

Communication Services PCS) at 1.9 Ghz. Also, the

UX390 works on Advanced Mobile Phone Service. We

call it a tri-mode phone. Since the phone operates on

Cellular, PCS and AMPS, the call fail rate is less than on

a conventional dual-mode or singlemode phone.

WELCOME

UX390_Eng.qxd 7/7/06 6:00 PM Page 9

TECHNICAL DETAILS

CDMA Standard

Basic Air

Interface

TIA/EIA-95A

TSB-74

ANSI J-STD-008

TIA/EIA-IS2000

ANSI TIA/EIA 553A

CDMA Tri-Mode Air Interface

14.4kbps radio link protocol and

inter-band operations

IS-95 adapted for PCS frequency

band cdma2000 1xRTT AirInterface

Advanced Mobile Phone Service

MAS-BS

PCSC-RS

Intersystem operations

Non-signaling data comm.

Cellular base station

Cellular mobile station

PCS personal station

PCS base station

Speech CODEC

TIA/EIA/IS-634

TIA/EIA/IS/651

TIA/EIA/IS-41-C

TIA/EIA/IS-124

TIA/EIA/IS-97

TIA/EIA/IS-98

ANSI J-STD-018

ANSI J-STD-019

TIA/EIA/IS-125

TIA/EIA/IS-96-B

TIA/EIA/IS-99

TIA/EIA/IS-637

TIA/EIA/IS-657

IS-801

TIA/EIA/IS-707-A

Speech CODEC

Async Data and Fax

Short message service

Packet Data

Position Determination

Service (gpsOne)

High Speed Packet Data

Network

Service

Performance

Designator Description

CDMA technology uses a feature called DSSS

(Direct Sequence Spread Spectrum) that enables

the phone to keep communication from being

crossed and to use one frequency channel by

multiple users in the same specific area. This

results in a 10-fold capacity increase when

compared with analog mode. In addition, features

such as soft / softer handoff, hard Handoff, and

dynamic RF power control technologies combine

to reduce call interruptions.

The Cellular and PCS CDMA networks consist

of MSO (Mobile Switching Office), BSC (Base

Station Controller), BTS (Base Station

Transmission System), and MS (Mobile Station).

* TSB-74: Protocol between an IS-95A system

and ANSI J-STD-008

1xRTT system receives twice as many

subscribers in the wireless section as IS-95. Its

battery life is twice as long as IS-95. High-

speed data transmission is also possible.

The following table lists some major CDMA

standards.

UX390_Eng.qxd 7/7/06 6:00 PM Page 10

TECHNICAL DETAILS

FCC RF Exposure Information

WARNING! Read this information before operating

the phone.

In August 1996, the Federal Communications

Commission (FCC) of the United States, with its action in

Report and Order FCC 96-326, adopted an updated

safety standard for human exposure to Radio Frequency

(RF) electromagnetic energy emitted by FCC regulated

transmitters. Those guidelines are consistent with the

safety standard previously set by both U.S. and

international standards bodies.

The design of this phone complies with the FCC

guidelines and these international standards.

Bodily Contact During Operation

This device was tested for typical use with the back

of the phone kept 0.6 inches (1.5 cm) from the

body. To comply with FCC RF exposure requirements,

a minimum separation distance of 0.6 inches (1.5 cm)

must be maintained between the user’s body and the

back of the phone, including the antenna, whether

extended or retracted. Third-party belt-clips, holsters,

and similar accessories containing metallic

components should not be used. Avoid the use of

accessories that cannot maintain 0.6 inches (1.5 cm)

distance between the user’s body and the back of the

phone and have not been tested for compliance with

FCC RF exposure limits.

Vehicle-Mounted External Antenna

(Optional, if available.)

A minimum distance of 8 inches (20cm) must be

maintained between the user / bystander and the

vehicle-mounted external antenna to satisfy FCC RF

exposure requirements. For more information about

RF exposure, visit the FCC website at www.fcc.gov.

Caution

Use only the supplied and approved antenna. Use of

unauthorized antennas or modifications could impair

call quality, damage the phone, void your warranty

and/or result in violation of FCC regulations.

Do not use the phone with a damaged antenna. If a

damaged antenna comes into contact with the skin a

minor burn may result. Contact your local dealer for

a replacement antenna.

UX390_Eng.qxd 7/7/06 6:00 PM Page 11

PHONE OVERVIEW

Charger port

LCD Screen

Left Soft Key

Navigation Keys

Right Soft Key

Speaker Key

SEND Key

Side Keys

BACK Key

Voice Commands Key

Manner Mode Key

Alphanumeric Keypad

Lock Mode Key

Microphone

END/PWR Key

Earphone Jack

SpeedTalk

Key

Earpiece

Flip

1. Detach the earphone cap

using the crack with your

nail toward right.

2. Swivel the cap downward.

3. Plug in the earphone into

the earphone jack.

UX390_Eng.qxd 7/7/06 6:00 PM Page 12

PHONE OVERVIEW

Earpiece Lets you hear the caller.

LCD Screen Displays messages and indicator icons.

Flip Open the case to answer an incoming call and

close to end the call.

Left Soft Key Use to display the function setting

menu.

SEND Key Use to place or answer calls.

Side Keys Use to adjust the ringer volume in standby

mode and the earpiece volume during a call.

BACK Key Press to delete a single space or character.

Press and hold to delete entire words. Press this key

once in a menu to go back one level.

Voice Commands Key Use for access to Voice

Commands and Voice Memo.

Manner Mode Key Use to set the Manner Mode

(from standby mode press and hold for about

3 seconds).

Navigation Key Use for quick access to Messages,

My Speaker on, Axcess Apps. and Mobile Web.

Right Soft Key Use to select an action within a

menu.

Speaker Key Use to turn speakerphone on/off on

the right side of the phone.

END/PWR Key Use to turn the power on/off and to

end a call. Also use to return to the main menu

display screen.

Alphanumeric Keypad Use to enter numbers and

characters and select menu items.

Lock Mode Key Use in standby mode to set the lock

function by pressing and holding the key for

about 3 seconds.

Microphone Lets callers hear you.

Earphone Jack Use to plug the earphone to let you

hear callers.

SpeedTalk

Key Press to use the SpeedTalk

Function.

Charger port Connects the charger to the phone.

UX390_Eng.qxd 7/7/06 6:00 PM Page 13

MENUS OVERVIEW

Contacts

1. List Contacts

2. New Number

3. New E-mail

4. Groups

5. Speed Dials

6. My Contact Info

Recent Calls

1. Dialed Calls

2. Received Calls

3. Missed Calls

4. Erase Calls

1. Dialed Calls

2. Received Calls

3. Missed Calls

4. All Calls

5. Call Timer

1. Last Call

2. Home Calls

3. Roam Calls

4. All Calls

6. KB Counter

1. Received

2. Transmitted

3. Total

Messages

1. Voice Mail

2. New Text Msg

3. New Photo Msg

4. Inbox

5. Outbox

6. Saved

7. Msg Settings

1. Auto Save

2. Auto Erase

3. Photo-Auto Receive

4. Callback #

5. Signature

6. Voice Mail #

7. Text Auto View

8. Entry Mode

9. Insert Quick-Text

0. Text Auto Play

8. Erase All

1. Inbox

2. Outbox

3. Saved

4. All

SpeedTalk

1. ST Contacts

2. New ST Contact

3. New ST Group

4. Recent ST

5. ST Settings

1. ST On/Off

2. Speaker On/Off

3. ST Alert Tone

easyedge

1. easyedge

2. Help

Media

1. Images

2. Sounds

UX390_Eng.qxd 7/7/06 6:00 PM Page 14

MENUS OVERVIEW

Tools

1. Schedule

2. Alarm Clock

1. Alarm 1

2. Alarm 2

3. Alarm 3

4. Quick Alarm

3. Voice Memo

4. My Shortcut

5. Notepad

6. Ez Tip Calc

7. Calculator

8. World Clock

Settings

1. Sounds

1. Ringers

2. Key Tone

3. Volume

4. Message Alerts

5. Service Alerts

6. Power On/Off Tone

7. DTMF Length

2. Display

1. Banner

2. Backlight

3. Screens

4. Menu Style

5. Clocks

6. Theme Colors

7. Contrast

8. Fonts

9. Language

0. Power Saver

3. System

1. Select System

2. Set NAM

3. Auto NAM

4. Serving System

4. Security

1. Lock Phone

2. Restrict Calls

3. Emergency #s

4. Change Lock

5. Erase Contacts

6. Reset Default

5. Call Setup

1. Auto Retry

2. Answer Call

3. Auto Answer

4. One-Touch Dial

5. Voice Privacy

6. Auto Volume

7. TTY Mode

8. Airplane Mode

6. Data Settings

1. PC Connection

7. Voice Services

1. Voice Commands

2. Sound Modes

3. Announce Alerts

4. Best Match

5. Train Words

6. Help

8. Location

Phone Info

1. My Phone Number

2. S/W Version

3. Icon Glossary

4. Shortcut Help

UX390_Eng.qxd 7/7/06 6:00 PM Page 15

GETTING STARTED WITH YOUR PHONE

Menu Access

Press Left Soft Key

to access nine phone

menus. There are two methods of accessing menus

and submenus:

●

Use the navigation key to highlight and select, or

●

Press the number key that corresponds to the

menu (or submenu).

For example:

1. Press Left Soft Key

to display nine menu

items.

Use to scroll through the list of menus.

2. Press the appropriate number key corresponding

to the menu item you want to select.

The sub-menu list will be displayed.

3. Press the appropriate number key corresponding

to the sub-menu you want to access.

4. Use to highlight your preferred setting, then

press to select it.

The Battery

The phone comes with a rechargeable battery. Keep

the battery charged while not in use in order to

maximize talk and standby time. The battery charge

level is shown at the top of the LCD screen.

Installing the Battery

To install the battery, insert the battery into the

opening on the back of the phone. Put the battery

cover on the battery and push it slightly upwards.

Removing the Battery

Turn the power off. Push down slightly. Pull the

battery cover downward and remove it. Then remove

the battery by pressing the upper area of it.

Note

It is important to fully charge the battery before initial use

of the phone.

Note

Press to go back one step (while accessing a menu or

selecting a setting). Changes to settings will not be saved.

UX390_Eng.qxd 7/7/06 6:00 PM Page 16

Charging the Battery

To use the charger provided with your phone:

Warning! Use only the charger provided with the

phone. Using any charger other than the one included

with the UX390 may damage your phone or battery.

1. Plug the end of the adapter into the phone’s

charger port and the other end into an electrical

outlet. (See the illustration on page 12.)

2. The charge time varies depending upon the

battery level.

Battery Charge Level

The battery charge level is shown at the top right of

the LCD screen. When the battery charge level

becomes low, the low battery sensor alerts you in

three ways: sounding an audible tone, blinking the

battery icon, and displaying Low Battery. If the

battery charge level becomes exceedingly low, the

phone automatically switches off and any function in

progress is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to

an external power source such as a cigarette lighter

charger or hands-free car kit.

2. Press for about 3 seconds until the LCD

screen lights up.

Turning the Phone Off

1. Press and hold until the display turns off.

Signal Strength

Call quality depends on the signal strength in your

area. The signal strength is indicated on the screen

as the number of bars next to the signal strength

icon: The more bars, the better the signal strength. If

the signal quality is poor, move to an open area. If

you are in a building, the reception may be better

near a window.

EmptyFully Charged

Note

Like any other radio device, avoid contact with the

antenna while your phone is on.

GETTING STARTED WITH YOUR PHONE

UX390_Eng.qxd 7/7/06 6:00 PM Page 17

Screen Icons

When the phone is on, the top line of the LCD screen displays phone status icons. To see the icon glossary, go

Phone Info

Icon Glossary

on your phone.

GETTING STARTED WITH YOUR PHONE

Battery Strength. Indicates battery charge level.

In call state indicator. A call is in progress. * No icon indicates the phone is in Main Menu Screen.

No service indicator. The phone is not receiving a system signal.

New Messages.

New voice mails indicator.

New Msgs & Voice.

Manner Mode.

Silence All.

Alarm.

Roaming.

IS-2000.

SpeedTalk

On.

Signal strength indicator. The strength of the signal received by the phone is indicated by the number of bars

displayed.

Announce alerts. Speaker On.

Driving mode. Announce mode.

1x Data Active\. Airplane Mode.

Location on mode. E911 only mode.

SSL. TTY.

Digital indicator

Analog indicator

UX390_Eng.qxd 7/7/06 6:00 PM Page 18

GETTING STARTED WITH YOUR PHONE

Making Calls

1. Make sure the phone is turned on. If not, press

for about 3 seconds.

2. Enter the phone number (include the area code if

needed).

3. Press .

lf the phone is locked, enter the lock code.

Call Failed - indicates the call did not go through.

Restricted - indicates outgoing calls are in

restricted mode.

4. Press to end the call.

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press

once to erase the last digit entered, or hold

down for at least 2 seconds to go to the

standby mode.

Redialing Calls

1. Press twice to redial the last number you

dialed. The last 30 numbers are stored in the call

history list and you can also select one of these to

redial.

Receiving Calls

1. When the phone rings or vibrates, press to

answer.

2. Press twice to end the call.

Note

If you press or (the side keys) while the phone is

ringing, the ringing or vibration is muted for that call.

Note

If the phone is restricted, you can only dial phone

numbers saved in the Emergency Numbers or your

Contacts. To turn off this function: Menu ->

Settings -> Security -> Enter Lock

Code -> Restrict Calls -> Off -> OK (The default

lock code is the last 4 digits of your phone number.)

UX390_Eng.qxd 7/7/06 6:00 PM Page 19

QUICK ACCESS TO CONVENIENT FEATURES

QUICK ACCESS TO CONVENIENT

FEATURES

Manner Mode

Sets the phone to vibrate instead of ring ( is

displayed). To quickly set Manner Mode press and

hold . To return to Normal Mode, press and

hold .

Lock Mode

Sets your phone to require your 4-digit password in

order to use the phone.

To quickly lock your phone press for three

seconds. To cancel, press Right Soft Key [Unlock]

and enter the password.

Mute Function

The Mute Function doesn’t transmit your voice to the

caller. To quickly activate Mute press Left Soft Key

[Mute], then to cancel press Left Soft Key

[Unmute].

Volume Quick Adjustment

Use the side keys to adjust the earpiece and ringer

volumes. The upper key increases the volume and the

lower key decreases the volume.

●

Earpiece volume can be adjusted during a call.

Ringer volume can be adjusted during a call.

Note

Key Beep volume is adjusted through the Sounds Volume

(Menu -> 8 -> 1 -> 3 -> 3).

Note

The Mute Key is activated during a call.

Note

Until you change it, the lock code/password is the last 4

digits of your phone number.

UX390_Eng.qxd 7/7/06 6:00 PM Page 20

QUICK ACCESS TO CONVENIENT

FEATURES

Call Waiting

Your cellular service may offer call waiting. While a

call is in progress, two beeps indicate another

incoming call. When call waiting is enabled, you may

put the active call on hold while you answer the

other incoming call. Check with your service provider

for information about this function.

1. Press to receive a waiting call.

2. Press again to switch between calls.

Caller ID

Caller ID displays the phone number or name of the

incoming call. If the caller’s identity is stored in Contacts,

the name appears with the number. Check with your

service provider to ensure they offer this feature.

Speed Dialing

Speed dialing is a convenient feature that allows you

to make phone calls quickly and easily with a few

keystrokes. Your phone recalls the number from your

Contacts, displays it briefly, and then dials it. Speed

Dial Number 1 is assigned to Voice Mailbox by

default, but you can change it.

Dialing Single Digit Speed Dials (from 2 to 9)

Press and hold the Speed Dial number.

Enter the speed dial number and press .

Dialing Double Digit Speed Dials (from 10 to 99)

Press the first digit and then press and hold the

key of the last digit.

Enter the first and second digits and press .

UX390_Eng.qxd 7/7/06 6:00 PM Page 21

ENTERING AND EDITING INFORMATION

Text Input

You can input and edit your Banner, Schedule,

Contacts, Notepad, and Messaging.

Key Functions

Right Soft Key (Left Soft Key only in

Messaging):

Enter the text screen to create a text message.

Press to scroll through the following text input

modes: T9Word -> Abc -> 123 -> Symbols ->

Smileys.

Shift: Press to change case.

T9 text: T9Word -> T9WORD -> T9word

Abc text: Abc -> ABC -> abc

Next: In T9 mode, press to display other

matching words.

Space: Press to complete a word and insert a

space.

Clear: Press to delete a single space or

character. Hold to delete the whole message.

Punctuation: In T9 mode, press to insert

punctuation in a word and complete a

sentence.

Text Input Modes

There are five modes for entering text, numbers,

special characters, and punctuation. In a text entry

field, pressing Right Soft Key displays a pop-up

list of text modes.

* Left Soft Key ( ) in Messages menu.

T9Word (T9) Mode

Use to type text using one keystroke per letter. The

phone translates keystrokes into common words by using

the letters on each key and a compressed database.

Abc (Multi-tap) Mode

Use to add words to the T9 database.

123 (Numbers) Mode

Use to type numbers using one keystroke per number.

Note

When Key Tone is changed from Beep to English or

Spanish (Menu -> 8 -> 1 -> 2), the phone does not

announce numbers when 123 mode is in use.

ENTERING AND EDITING

INFORMATION

UX390_Eng.qxd 7/7/06 6:00 PM Page 22

Symbols Mode

Use to insert special characters or punctuation.

There are 39 special characters including “SP” which

inserts a space and “LF” which forces the text to the

next line.

Smileys Mode

Use to insert smiley graphics. There are 40 smiley

characters.

Changing Letter Case

Using T9 and Abc text input modes you can set the

capitalization. Press to reach the following:

Initial Cap (T9Word/ Abc)

Only the first letter is capitalized and subsequent

letters are lower case.

Caps Lock (T9WORD/ ABC)

All letters are capitalized.

Lower Case (T9word/ abc)

All letters are in lower case.

Text Input Examples

Display the text modes and select a text mode:

1. In a text entry field, press Left Soft Key to

display text modes.

2. Press to use the text input mode you want

to use.

3. Press to select the text input mode.

Using Abc (Multi-tap) Text Input

1. Press Left Soft Key to change to Abc mode.

2. Press to change to ABC Caps Lock every

time for capital letters.

3. Press .

LG is displayed.

Using T9 Mode Text Input

1. Press Left Soft Key to change to T9Word

mode.

2. Press .

3. Press to complete the word and add a space.

ENTERING AND EDITING

INFORMATION

UX390_Eng.qxd 7/7/06 6:00 PM Page 23

ENTERING AND EDITING INFORMATION

4. Press

Call the office. is displayed.

Using the NEXT Key (In T9 Mode)

After you have finished entering a word, if the word

displayed is not the one you want, press to

display additional choices of words from the

database.

1. Press .

Good is displayed.

2. Press .

The display gives you additional choices such as:

Home, Gone, Hood, etc.

Adding Words to the T9 Database

If a word is not in the T9 database, add it using Abc

(Multi-tap) mode text entry.

1. Press Left Key (or Right Soft Key) to change

to Abc (multi-tap) mode.

2. Press .

Wait for a while for space between characters.

Bop is displayed.

3. Press Right Soft Key (or Left Soft Key) to

change to T9 mode to add the word Bop to the

T9 database.

4. Press to erase the existing word.

5. Press .

cop is displayed.

6. Press .

bop is displayed.

ENTERING AND EDITING

INFORMATION

UX390_Eng.qxd 7/7/06 6:00 PM Page 24

Contacts Entries

This allows you to have easy access to your most

frequently dialed phone numbers. You may store up

to 500 entries with up to 5 phone numbers each.

Each entry may be up to 22 characters. Each phone

number may be up to 48 digits.

The Basics of Storing Contacts Entries

1. From standby mode enter the phone number you

want to save (up to 48 digits).

2. Press Right Soft Key [Options] and select [Save

to Contacts].

3. Use to highlight a Label and press .

Home

Home2

Office

Office2

Mobile

Mobile2

Pager

Fax

Fax2

None

4. Use to select New Name or Existing and

press .

5. Enter a name for the phone number (up to 22

characters) and press .

A confirmation message is displayed briefly.

6. Continue saving the entry as a Speed Dial

selecting

[Speed Dial]

CONTACTS IN YOUR PHONE’S MEMORY

CONTACTS IN YOUR

PHONE’S MEMORY

Note

Use Existing to add another phone number to a contact

already stored in memory.

Note

To skip name entry, press to go to the next step.

Note

If the information is complete, press to return to the

standby mode.

Note

To further customize the Contact entry, press Left Soft

Key

Done

UX390_Eng.qxd 7/7/06 6:00 PM Page 25

Options to Customize Your Contacts

Once the basic phone number and name information

is stored in your Contacts, you can edit and

customize each entry.

1. Press Right Soft Key

Contacts

and use

to highlight the contact entry you want to edit,

then press .

2. Press Left Soft Key

Edit

to access the Edit

Contact screen.

3. Use to highlight the information you want to

customize, then press .

Adding or Changing the Group

Allows you to manage your Contacts entries by

organizing them into groups.

1. Press Right Soft Key

Contacts

and use to

highlight an entry, then press .

2. Press Left Soft Key

Edit

3. Use to highlight

No Group

, then press .

4. Use to select the Group, then press .

No Group

Family

Friends

Colleagues

Business

School

5. Press Left Soft Key

Done

to save the change.

Changing the Call Ringer

Allows you to identify who is calling, by setting

different ringers for different phone numbers in your

Contacts. It is automatically set to the default ringer

when the Contact is saved.

1. Press Right Soft Key

Contacts

and use

to highlight an entry, then press .

2. Press Left Soft Key Edit.

3. Use to highlight Default Ringer, then press

4. Use to select the Ringer Type, then press

5. Press Left Soft Key Done to save the change.

CONTACTS IN YOUR PHONE’S MEMORY

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:00 PM Page 26

Changing the Message Ringer

Allows you to identify who is sending you a message,

by setting different ringers for different phone

numbers in your Contacts. It is automatically set to

the default ringer when the Contact is saved.

1. Press Right Soft Key

Contacts

and use

to highlight an entry, then press .

2. Press Left Soft Key

Edit

3. Use to highlight

Default Text Msg Ringer

then press .

4. Use to select the

Ringer Type, then

press .

5. Press Left Soft Key

Done

to save the change.

Adding or Changing the Memo

Allows you to enter up to 32 characters as a memo

to the Contact entry.

1. Press Right Soft Key

Contacts

and use

to highlight an entry, then press .

2. Press Left Soft Key

Edit

3. Use to highlight

Memo

, then press .

4. Enter text, then press .

5. Press Left Soft Key

Done

to save the change.

Adding or Changing the Picture ID

Allows the phone to display an image to identify the

caller.

1. Press Right Soft Key

Contacts

and use

to highlight an entry, then press .

2. Press Left Soft Key

Edit

3. Use to highlight

Default

, then press .

4. Use to select one of the images available,

then press .

5. Press Left Soft Key

Select

6. Press Left Soft Key

Done

to save the change.

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:00 PM Page 27

CONTACTS IN YOUR PHONE’S MEMORY

Adding Speed Dial

1. Press Right Soft Key

Contacts

and use

to highlight an entry, then press .

2. Press Left Soft Key

Edit

3. Use to highlight the phone number you want

to set with a Speed Dial, then press .

4. Press to select

Speed Dial

, then press .

5. Enter a Speed Dial digit. Use the Keypad, then

press , or use to highlight the Speed Dial

digit, then press .

6. Press Left Soft Key

Done

to save the change.

Editing Contacts Entries

Adding Another Phone Number

From standby mode

1. From standby mode enter the phone number you

want to save (up to 48 digits).

2. Press Right Soft Key

[Options]

and select

Save to Contacts.

3. Use to highlight a Label, then press .

Home/ Home2/ Office/ Office2/ Mobile/

Mobile2/ Pager/ Fax/ Fax2/ None

4. Use to highlight Existing, then press .

5. Use to highlight the existing Contact entry,

then press .

A confirmation message is displayed.

Through Contacts

1. From standby mode press Right Soft Key

Contacts

. Your Contacts display alphabetically.

2. Use to highlight the Contact entry you want

to edit, then press .

3. Press Left Soft Key

Edit

4. Use to highlight

Add Number

, then press

5. Enter the number, then press .

6. Use to highlight a Label, then press .

A confirmation message is displayed.

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:00 PM Page 28

Default Numbers

The phone number saved when a Contact is created

is the Default Number. If more than one number is

saved in a Contact entry, another number can be

designated as the Default Number.

Changing the Default Number

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to highlight the

Contact

entry you want

to edit, then press .

3. Press Left Soft Key

Edit

4. Use to highlight the phone number you want

to set as the Default Number, then press Right

Soft Key

Options

and

Set as Default #

Editing Stored Phone Numbers

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to highlight the Contact entry you want

to edit, then press .

3. Press Left Soft Key

Edit

4. Use to highlight the phone number, then

press twice.

5. Edit the phone number as necessary, then press

6. Use to confirm the Label, then press .

A confirmation message is displayed.

Editing Stored Names

1. Press Right Soft Key Contacts to display your

Contacts alphabetically.

2. Use to highlight the Contact entry you want

to edit, then press .

3. Press Left Soft Key Edit.

4. Use to highlight the name, then press .

5. Edit the name as necessary, then press .

6. Press Left Soft Key Done to save the change.

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:00 PM Page 29

CONTACTS IN YOUR PHONE’S MEMORY

Editing Customized Options

Edit any of the Contacts options in the same manner

as when the Contact is created.

1. Press Right Soft Key Contacts to display your

Contacts alphabetically.

2. Use to highlight the Contact entry you want

to edit, then press .

3. Press Left Soft Key Edit.

4. Use to highlight the information you want to

customize, then press .

5. Edit the information as necessary, then press .

6. Press Left Soft Key Done to save the change.

Deleting

Deleting a Phone Number from a Contact

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to highlight the

Contact

entry, then

press .

3. Press Left Soft Key

Edit

4. Use to highlight the phone number to be

deleted.

5. Press Right Soft Key

Options

6. Press

Erase Number

7. Press

Erase Number

A confirmation message is displayed.

Deleting a Contact Entry

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to highlight the Contact entry to be

deleted, then press .

3. Press Left Soft Key

Edit

4. Press Right Soft Key

Options

5. Press

Erase Contact

6. Press

Erase

A confirmation message is displayed.

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:00 PM Page 30

Additional Ways to Delete a Contact

At any time when your Contacts are displayed, the

Right Soft Key

Options

allows you to erase the

highlighted entry.

Deleting a Speed Dial

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to highlight the Contact entry, then

press .

3. Press Left Soft Key

Edit

4. Use to highlight the number, then press .

5. Use to highlight the Speed Dial entry, then

press .

6. Use to highlight the existing Speed Dial

location.

7. Press Right Soft Key

Options

8. Press

Remove

9. Press

Remove

A confirmation message is displayed.

Phone Numbers With Pauses

When you call automated systems such as voice mail

or credit billing numbers, you often have to enter a

series of numbers. Instead of entering these numbers

by hand, you can store the numbers in your Contacts

separated by special pause characters (P, T). There

are two different types of pauses you can use when

storing a number:

Hard Pause (P)

The phone stops dialing until you press Left Soft Key

Release to advance to the next number.

2-sec Pause (T)

The phone waits 2 seconds before sending the next

string of digits.

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:01 PM Page 31

Storing a Number with Pauses

1. Press Left Soft Key

2. Press

Contacts

3. Press

New Number

4. Enter the number.

5. Press Right Soft Key

Pause

6. Use to select pause type, then press .

Hard pause/ 2-sec pause

7. Enter additional number(s) (e.g., pin number or

credit card number), then press .

8. Use to select a Label, then press .

9. Enter a name (up to 22 characters).

A confirmation message is displayed.

Adding a Pause to an Existing Number

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to highlight the Contact entry to edit,

then press .

3. Press Left Soft Key

Edit

4. Use to highlight the number then press

2 times.

5. Press Right Soft Key

Pause

6. Press

Hard pause

2-sec pause

7. Enter additional number(s), then press .

8. Use to confirm the Label, then press .

A confirmation message is displayed.

CONTACTS IN YOUR PHONE’S MEMORY

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:01 PM Page 32

Searching Your Phone’s Memory

The UX390 phone is capable of performing a dynamic

contents search of the phone's memory. A dynamic

search compares entered letters or numbers against

the entries in your Contacts. A matching list is

displayed in descending order. You can then select a

number from the list to call or edit. There are several

ways to search:

●

Scrolling Alphabetically

●

Searching by Letter

●

Searching by Options

Scrolling Through Your Contacts

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to scroll through the list.

Searching by Letter

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Press (or press repeatedly) the key on the keypad

that corresponds with the search letter.

Searching Options

1. Press Right Soft Key

Contacts

2. Press Right Soft Key

Options

3. Select the search criteria (use then press ,

or press the corresponding number on the

keypad):

New Number

New E-mail

Find Name

: Enter the character(s) to search for

(such as the first letter(s) of the name).

Find Number

: Enter the number(s) to search.

Find Speed Dial

: Enter the speed dial

number(s) to search.

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:01 PM Page 33

Find Group

: Use to highlight the group

to search for, then press .

Find E-mail

: Enter the e-mail address to search.

Send Text Msg

: Send a text message to the

selected contact.

Send Photo Msg

: Send a photo message to

the selected contact.

Erase

: Erase the selected entry in your

Contacts.

Copy to ST

: Copy the selected contact entry

to SpeedTalk

. Enter extra information to

Group, Ringer, Text Msg Ringer and Picture.

Use Left Soft Key Edit to edit the

information.

4. When the list of matches is displayed, use to

highlight a matched entry.

5. Press to see more information or press

to place a call.

Making a Call From Your Phone’s

Memory

Once you have stored phone numbers in your

Contacts, you can place calls to those numbers

quickly and easily.

●

By pressing after searching for a phone

number in Contacts or Recent Calls and

highlighting it.

●

By using Speed Dialing

From Contacts

1. Press Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to select the Contact entry, then press

3. Use to select the phone number.

4. Press to place the call.

CONTACTS IN YOUR PHONE’S MEMORY

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:01 PM Page 34

From Recent Calls ( as a hot key)

1. Press Left Soft Key

2. Press

Recent Calls

3. Use to select the type of recent call, then

press .

Dialed Calls/ Received Calls/ Missed Calls

4. Use to select the phone number.

5. Press to place the call.

Speed Dialing

For a single-digit Speed Dial, press and hold the digit

or press the digit, then press . For a double-digit

Speed Dial, press the first digit and hold the second

digit or press the first and second digits, then press

Prepending a Stored Number

Prepend can be used if you are out of your home

system area and need to add the area code to an

existing number in your phone's memory. When a

Contacts entry or message callback number is

displayed, you can add to the beginning of the

original number. However, you cannot edit the

original number.

1. Recall a number in your Recent Calls (Dialed,

Received, or Missed).

2. Press Right Soft Key

Options

3. Press

Prepend

4. Enter the prepend digits to the phone number.

5. Press to place the call.

CONTACTS IN YOUR

PHONE’S MEMORY

UX390_Eng.qxd 7/7/06 6:01 PM Page 35

Contacts

The Contacts Menu allows you to store names,

phone numbers and other information in your

phone’s memory.

Access and Options

1. Press Left Soft Key

2. Press

Contacts

3. Select a sub-menu.

1. List Contacts

2. New Number

3. New E-mail

4. Groups

5. Speed Dials

6. My Contact Info

1. List Contacts

Allows you to view your Contacts list.

1. Press , , .

2. Options from here:

●

Press to scroll through your Contacts

alphabetically.

●

Press Right Soft Key

Options

to select one

of the following:

New Number/ New E-mail/ Find Name/ Find

Number/ Find Speed Dial/ Find Group/ Find

E-mail/ Send Text Msg/ Send Photo Msg/

Erase/ Copy to ST

●

Press Left Soft Key

Alert available at 1X

network

CONTACTS

UX390_Eng.qxd 7/7/06 6:01 PM Page 36

CONTACTS

2. New Number

Allows you to add a new number to your Contacts.

1. Press , , .

2. Enter the number, then press .

3. Select the Label you want and press .

4. Enter the name, then press .

5. Continue saving the entry as necessary.

3. New E-mail

Allows you to save a new e-mail address.

1. Press , , .

2. Enter the e-mail address, then press .

3. Enter the name, then press .

4. Continue saving the entry as necessary.

4. Groups

Allows you to view your grouped Contacts, add a new

group, change the name of a group, or erase a whole

group.

1. Press , , .

2. Options from here:

●

Use to highlight a group to view, then

press .

●

Press Left Soft Key

Add

to add a new group

to the list (Group Name and Group Icon).

●

Use to highlight a group, then press Right

Soft Key

Options

to change the name of the

group or delete the group.

Note

Using this sub-menu, the number is saved as a new

Contact. To save the number into an existing Contact, edit

the Contact entry.

Note

Using this sub-menu, the e-mail is saved as a new Contact.

To save the e-mail into an existing Contact, edit the

Contact entry.

UX390_Eng.qxd 7/7/06 6:01 PM Page 37

5. Speed Dials

Allows you to view your Speed Dials list, designate

new Speed Dials, or remove Speed Dial designations

entered in your Contacts.

1. Press , , .

2. Use to highlight the Speed Dial position (or

enter the Speed Dial digit), then press .

3. Use to highlight the Contact, then press

4. Use to highlight the number, then press .

A confirmation message is displayed.

6. My Contact Info

Allows you to enter your own virtual business card to

be used in text messages.

1. Press , , .

2. Use to select the feature you want to edit,

then press .

3. Edit the information as necessary.

CONTACTS

Note

You cannot edit phone number, but you can add an

additional phone number.

UX390_Eng.qxd 7/7/06 6:01 PM Page 38

RECENT CALLS

Recent Calls

The Recent Calls Menu is a list of the last phone

numbers or Contact entries for calls you placed,

accepted, or missed. It is continually updated as new

numbers are added to the beginning of the list and

the oldest entries are removed from the bottom of

the list.

Access and Options

1. Press Left Soft Key

2. Press

Recent Calls

3. Select a sub-menu.

1. Dialed Calls

2. Received Calls

3. Missed Calls

4. Erase Calls

5. Call Timer

6. KB Counter

1. Dialed Calls

Allows you to view the list of outgoing calls; up to 30

entries.

1. Press , , .

2. Use to highlight an entry.

●

Press to view the entry.

●

Press to place a call to the number.

Note

To view a quick list of all your recent calls, press from

standby mode.

UX390_Eng.qxd 7/7/06 6:01 PM Page 39

●

Press Right Soft Key

Options

(for call lists) to

select

Save to Contacts

Save to ST

Send Text

Msg

Send Photo Msg

Prepend

Erase

Erase All

●

Press to return to the standby mode.

2. Received Calls

Allows you to view the list of incoming calls; up to 30

entries.

1. Press , , .

2. Use to highlight an entry.

3. Missed Calls

Allows you to view the list of missed calls; up to 30

entries.

1. Press , , .

2. Use to highlight an entry.

4. Erase Calls

Allows you to erase selected call list(s).

1. Press , , .

2. Use to highlight the list of calls to erase, then

press .

Dialed Calls/ Received Calls/ Missed Calls/ All

Calls

3. Press

Erase

Cancel

5. Call Timer

Allows you to view the duration of selected calls.

1. Press , , .

2. Use to highlight a call list, then press .

Last Call/ Home Calls/ Roam Calls/ All Calls

RECENT CALLS

UX390_Eng.qxd 7/7/06 6:01 PM Page 40

RECENT CALLS

6. KB Counter

Allows you to view the list of received and

transmitted data calls.

1. Press , , .

2. Use to highlight a data call list, then press

Received/ Transmitted/ Total

UX390_Eng.qxd 7/7/06 6:01 PM Page 41

Messages

Access and Options

1. Press Left Soft Key

2. Press

Messages

3. Select a sub-menu.

Voice Mail

: Shows the number

of messages in voice mail box.

New Text Msg

: Sends a

message.

New Photo Msg

: Sends an

MMS message.

Inbox

: Shows the list of

received messages.

Outbox

: Shows the list of sent

messages.

Saved

: Shows the list of saved

and draft messages.

Msg Settings

: Selects alert

type for new messages.

Erase All

: Deletes all stored

messages.

Text messages, pages, and the voice mail box become

available as soon as the phone is powered on.

●

Check types of messages by pressing the message

key .

●

Make a call to the callback number by pressing

during an Inbox message check.

●

Read and edit messages saved in the outbox after

transmission and resend them.

The phone can store up to 116 messages (1 voice

message, 50 inbox text messages, 50 outbox text

messages, 15 saved text messages). The UX390

supports up to 160 characters per message including

header information. The information stored in the

message is determined by phone mode and service

capability. Other limits to available characters per

message may exist. Please check with your service

provider for system features and capabilities.

MESSAGES

UX390_Eng.qxd 7/7/06 6:01 PM Page 42

MESSAGES

New Message Alert

There are three ways your phone alerts you to new

messages.

1. The phone displays a message on the screen.

2. One of eight ring types is heard, if selected.

3. The message icon ( ) is displayed on the

screen. In the case of an urgent message, the icon

will flash and Urgent message is displayed.

1. Voice Mail

Allows you to view new voice messages recorded in

the voice mail box. Your phone will alert you when

you receive a new voice message.

Checking Your Voice Mail Box

1. Press , , .

2. Options from here:

●

Press Left Soft Key Clear to delete information,

then select Clear Count.

●

Press to listen to the message(s).

Note

If you receive the same message twice, your phone deletes

the older one and the new one is stored as a Duplicate.

UX390_Eng.qxd 7/7/06 6:01 PM Page 43

2. New Text Msg

Allows you to send text messages, EMS messages,

pages, and e-mail transmissions. Each message has a

destination (Address 1) and information (Message).

These are dependent upon the type of message you

want to send.

The Basics of Sending a Text Message

1. Press , , .

2. With the highlight on Address 1, press .

3. Enter the recipient's address, then press .

4. Press to access the message screen.

5. Type your message (text or e-mail), then press .

6. Press Left Soft Key Send.

A confirmation message is displayed.

Customizing the Text Message Using Options

1. Create a new message.

2. Press Right Soft Key

Options

3. Select the option(s) to customize.

Send

Sends the message.

Priority

Gives priority to the message.

Normal

Urgent

Callback #

Inserts a pre-programmed

callback number with your

message.

Off

Edit

Delivery Notice

Informs you that the message

has been successfully

delivered to the recipient.

Enhanced

Normal

Save Message

Saves the message into the

saved folder.

Erase Field

Deletes address or contents

of message field.

4. Complete and send the message.

MESSAGES

UX390_Eng.qxd 7/7/06 6:01 PM Page 44

Using Contacts to Send a Text Message

You can designate an entry saved in your Contacts as

Address 1 instead of manually entering the

destination.

1. Press , , .

2. Press Left Soft Key

Contacts

3. Select

Contacts

Recent Calls

Recent

Addresses.

then press .

4. Use to highlight the Contact entry containing

the destination, then press .

5. Use to highlight the SMS phone number or

e-mail address, then press .

6. Complete the message as necessary.

Text Options

While you are composing the text of a message you

can insert customized text.

1. Create a new message.

2. Use to highlight Message, and then press

3. Press Right Soft Key

Options

4. Select the option(s) to customize.

Insert Quick-Text

Inserts 11 predefined phrases.

Save Quick-Text

Allows you to define phrases

to insert as Insert Quick Text.

Insert Signature

Inserts a predefined signature.

Custom/ My Contact Info

5. Complete and send or save the message.

MESSAGES

Note

The Address 1 feature allows multi-sending of up to 10

addresses.

UX390_Eng.qxd 7/7/06 6:01 PM Page 45

Message Icon Reference

Sent

: Messages sent in Short Message

Center(SMC) have been transmitted.

Fail

: Indicates a failed message transmission.

Delivery

: Message has been delivered.

Lock

: Indicates that messages are locked.

Multi-sending

: Indicates more than one

designated recipient.

Pending

: Transmission is unavailable in a no

service area or in an analog service area.

Messages are pending transmission. Pending

messages are transmitted automatically

when digital mode becomes available.

3. New Photo Msg

Allows you send messages with Text, Picture and

Sound.

1. Press , , .

2. With the highlight on [Address 1], press .

You can search the destination by scrolling your

Contacts, Recent Call and Online Album after

pressing Left Soft Key [Contacts].

3. Enter the recipient's address, then press .

4. With the highlight on [Subject], press .

5. Enter the Subject, then press .

6. Press to access the message screen.

7. Type your message (text or e-mail), then press

8. With the highlight on

[Picture]

, press .

9. Use to highlight a picture, then press Left

Soft Key

Select

10. With the highlight on [Sound], press .

MESSAGES

UX390_Eng.qxd 7/7/06 6:01 PM Page 46

11. Use to highlight a sound, then press .

Or you can record your voice memo by pressing Left

Soft Key [Record] and send it with your message.

12. Press Right Soft Key

Options

13. Select the option(s) to customize.

Preview

Shows your message before sending.

Send

Sends the message.

Priority

Gives priority to the message.

Normal

Urgent

Delivery Notice

Informs you that the message has

been successfully delivered to the

recipient.

Enhanced

Normal

Save Message

Saves the message into the saved

folder.

14. Complete and send the message.

4. Inbox

The phone alerts you in 3 ways when you receive a

new message by:

●

Displaying a message notification on the screen.

●

Sounding a beep, vibrating or sound, if set.

●

Displaying the message icon (It blinks

when the message is urgent).

Received text messages, page messages, photo

messages and e-mail lists may be searched and the

contents viewed. Received messages are displayed

from newest to oldest.

Out of Memory Warning

If the memory is full, no more messages can be

received until enough memory space becomes

available. When there is no space to save SMS

messages, [Inbox] is 100% full. Unable to rcv.

Please erase messages. is displayed. For MMS

messages, Picture Msgs full. Delete messages. For

MMS notifications, Picture Msg Noti full. Delete

msgs. is displayed and new messages are not

accepted.

MESSAGES

UX390_Eng.qxd 7/7/06 6:01 PM Page 47

Viewing Your Inbox

Up to 50 received messages can be stored in the

Inbox.

1. Press , , .

2. Use to highlight an Inbox message.

●

Left Soft Key

complying with the

kinds of messages (Text/Photo Messaging).

●

Right Soft Key

Options

Erase

Deletes the selected message

from the Inbox.

Lock/UnLock

Locks a message so that it is

not erased if the Erase Inbox

or Erase All feature are used.

3. Use to highlight an Inbox message, then

press .

4. While viewing the selected message, press Left

Soft Key

or Right Soft Key

Options

Options from here:

Reply w Copy

Replies to the SMS with the

original message attached.

Forward

Forwards a received message to

other destination address(es).

Erase

Deletes the selected message

from the Inbox.

Save Address

Stores the callback number, e-

mail address, and numbers in

user data included in the

received message into your

Contacts.

Save Quick-Text

Saves the message into the

Quick-Text list.

Save Message

Saves Inbox message into the

Saved Folder.

Lock/UnLock

Locks or unlocks the selected

message. Locked messages can

not be deleted by the Erase

Inbox or Erase All functions.

Message Info

Shows the message type

priority and status.

MESSAGES

UX390_Eng.qxd 7/7/06 6:01 PM Page 48

5. Outbox

Up to 50 sent messages or photo messages can be

stored in the Outbox. View lists and contents of sent

messages and verify whether the transmission was

successful or not.

1. Press , , .

2. Use to highlight an Outbox message.

●

Press Left Soft Key

Resend

●

Press Right Soft Key

Options

Erase

Deletes the selected message

from the Outbox.

Lock/Unlock

Locks a message so that it is

not erased if the Erase

Outbox or Erase All feature is

used.

3. Use to highlight an Outbox message, then

press . While viewing the selected Outbox

message, press Left Soft Key

Resend

to or

press Right Soft Key

Options

Play

Replies to the text message

with original message attached.

Play Again

Send To

Erase

Deletes the selected message.

Save Picture

Save Sound

Save Address

Stores the callback number, e-

mail address, and numbers in

user data included in the

received message into your

Contacts.

Save Message

Saves Outbox message into

the Saved Folder.

Save Quick-Text

Saves the message into the

Quick-Text list.

Lock/Unlock

Locks or unlocks the selected

message. Locked messages

can not be deleted by the

Erase Outbox and Erase All

functions.

Message Info

Shows the message type

priority and status.

MESSAGES

UX390_Eng.qxd 7/7/06 6:01 PM Page 49

6. Saved

Displays saved messages and draft messages.

1. Press , , .

2. Use to highlight a Saved message.

●

Press Left Soft Key

Resume/Resend

●

Press Right Soft Key

Options

Erase

Deletes the selected message.

Lock/Unlock

Locks a message so that it is

not erased if the Erase Saved

or Erase All feature is used.

7. Msg Settings

Allows you to configure 9 settings for received

messages.

1. Press , , .

2. Use to highlight one of the settings and

press to select it.

Message Settings Sub-Menu Descriptions

7.1 Auto Save (Auto Save/ Prompt/ Do Not Save)

Allows you to automatically save sent messages in

your Outbox. You can choose Auto Save, Prompt, or

Do Not Save.

7.2 Auto Erase (On/ Off)

With this feature on, read messages(except locked

messages) are automatically deleted when you

exceed the storage limit.

7.3 Photo-Auto Receive (On/ Off)

Allows you to set photos to be received automatically.

7.4 Callback #

Allows you to automatically send a designated

callback number when you send a message. Allows

you to manually enter the number.

7.5 Signature (None/ Custom)

Allows you designate a signature to automatically

send with your messages. You can create a custom

signature line.

MESSAGES

UX390_Eng.qxd 7/7/06 6:01 PM Page 50

7.6 Voice Mail #

Allows you to manually enter the number for Voice

Mail Service. This number should be only used when

a VMS access number is not provided from the

network.

7.7 Text Auto View (On/ Off)

Allows you to directly display the content when

receiving a message.

7.8 Entry Mode (T9Word/ Abc/ 123)

Allows you to select the default input method.

7.9 Insert Quick-Text

Allows you to display, edit, and add text phrases.

These text strings allow you to reduce manual text

input into messages.

7.0 Text Auto Play (On/ Off)

With this feature on, the display automatically scrolls

down while viewing messages.

8. Erase All

Allows you to erase all the messages stored in your

Inbox, Outbox, or Saved messages folders. You can

also erase all messages at the same time.

1. Press , , .

●

Press

Inbox

to erase all messages stored

in the Inbox.

●

Press

Outbox

to erase all messages

stored in the Outbox.

●

Press

Saved

to erase all messages stored

in the Saved messages folder.

●

Press

All

to erase all messages stored in

the Inbox, Outbox, and Saved messages folder.

2. Press Erase

All

A confirmation message is displayed.

MESSAGES

UX390_Eng.qxd 7/7/06 6:01 PM Page 51

SpeedTalk

is an walkie-talkie-style service that

makes it easy for you to get in touch with your

spouse, friends or group of people instantly, with just

a touch of a button on the left top of your phone.

SpeedTalk

(ST) allows you to make a barge call or

send an Alert message. With a barge call the

receiving party does not have the option to ignore

the call. When an Alert message is sent to the

receiving party, the receiving party has the option to

place a ST call or ignore the alert.

Access and Options

1. Press Left Soft Key

2. Press

SpeedTalk

3. Select a sub-menu option.

1. ST Contacts

2. New ST Contact

3. New ST Group

4. Recent ST

5. ST Settings

SpeedTalk

UX390_Eng.qxd 7/7/06 6:01 PM Page 52

Call from SpeedTalk

Contact List (Barge)

1. From Standby mode, press and hold ST key to

access your ST Contact List.

2. Use to highlight the ST Contact entry you

wish to call.

3. Press and hold the ST key.

●

Sender hears ST talk tone and can begin

speaking.

●

Receiver has the options to answer or ignore

using

4. Press and hold ST Key to send alert.

5. Release ST Key after speaking.

●

Receiver hears incoming barge tone.

●

Receiver hears sender’s voice followed by the

floor available tone.

●

Sender’s device displays connected screen.

6. Press and hold ST key to speak.

7. Release ST key to listen.

Call from SpeedTalk

Contact List (Alert)

1. From Standby mode press and hold the ST key to

access your ST Contact List.

2. Use to highlight the ST Contact entry you

wish to alert.

3. Press Left Soft Key

Alert

●

Receiver hears alerting tone and receives alert

message.

4. If receiver accepts the alert and places a ST call to

the sender,

●

Sender hears incoming barge tone.

●

Sender hears receiver’s voice followed by the

floor available tone.

●

Receiver’s device displays connected screen.

5. Press and hold ST key to speak.

6. Release ST key to listen.

SpeedTalk

UX390_Eng.qxd 7/7/06 6:01 PM Page 53

Call from SpeedTalk

Contact List

(Group)

Allows you to make a multiparty call with all or

selected members of a ST Group.

1. Press and hold ST key to access ST Contacts list.

2. Use to highlight the ST Group.

3. To make a ST Group call to all members in the

Group,

- Press and hold ST Key.

To make a ST Group call to selected members of

the Group,

- Use to highlight the ST group and Press

- Select the Contacts you wish to include in ST

group call.

●

Sender hears ST talk tone and can begin

speaking.

4. Release ST key.

●

All members of Group hear incoming barge

tone.

●

All members of Group hear sender’s voice

followed by the floor available tone.

●

Sender’s device displays connected screen.

Call from Keypad (Barge)

1. From Idle Screen, enter the number.

2. Press and hold ST Key.

●

Sender hears ST talk tone and can begin

speaking.

●

If the phone number is in the ST contact list,

screen shows the Contact name.

3. Release ST key.

●

Receiver hears incoming barge tone.

●

Receiver hears sender’s voice followed by the

floor available tone.

●

Sender’s device displays connected screen.

SpeedTalk

Note

A group call is only a Barge and a user cannot alert a

group.

UX390_Eng.qxd 7/7/06 6:01 PM Page 54

Incoming SpeedTalk

(Barge)

1. Listening screen is shown with the phone number.

If the number is stored in ST Contact List, the

sender’s name is shown.

2. Press and hold ST key.

●

Sender hears ST talk tone and can begin

speaking.

3. Release ST key.

●

Receiver hears incoming barge tone.

●

Receiver hears callers voice followed by the

floor available tone.

●

Sender’s device displays connected screen.

Incoming SpeedTalk

(Alert)

1. Buddy Alert Message appears.

2. Select Answer or Ignore.

3. If Answer is selected, ‘Push ST button to make ST

call to (Contact name)’ is shown.

4. Press and hold ST key to reply.

●

Sender hears ST talk tone and can begin

speaking.

5. Release ST key.

●

Receiver hears incoming barge tone.

●

Receiver hears caller's voice followed by the

floor available tone.

●

Sender’s device displays connected screen.

SpeedTalk

Note

All Incoming ST calls come through the Speaker Phone.

UX390_Eng.qxd 7/7/06 6:01 PM Page 55

Incoming SpeedTalk

(Group)

1. The name of the Group will be displayed. Only

one person can speak at a time.

2. If floor is available, press and hold ST key, speak

after the talk tone is heard.

Making a SpeedTalk

call when the

phone is closed

When the phone is closed, you can place a ST call by

holding down the ST key. Your Recent ST Call history

will come up on the outer LCD screen. You may scroll

through the list using the side arrow keys. To place a

call, highlight a number then press the ST key. When

the call is connected, you will see an icon in the

status bar of your outer LCD screen exterior using

SpeedTalk

Menu.

1. SpeedTalk

Contacts

Allows you to view your ST Contacts list. ST

Contacts consists of individuals and Groups. For an

individual, a single phone number is saved. For a

Group, multiple individuals can be saved. An

individual can be saved in multiple ST Groups.

1. Press , , .

2. Press to scroll through your ST Contacts

alphabetically.

3. Press Right Soft Key

Options

to select one of

the following:

When highlighted entry is Individual

Find Name/ Find Number/ Find Group/ New

Contact/ New Group/ Erase/ Copy to Contacts

When highlighted entry is Group

Find Name/ Find Number/ Find Group/ New

Contact/ New Group/ Erase

SpeedTalk

UX390_Eng.qxd 7/7/06 6:01 PM Page 56

2. New SpeedTalk

Contact

Allows you to add a new individual to ST Contacts.

1. Press , , .

2. Enter the number, then press .

3. Enter the name, then press .

4. Phone will automatically connect to server and

update Contact information.

A confirmation message is displayed briefly.

3. New SpeedTalk

Group

Allows you to add a new ST group.

1. Press , , .

2. Enter the ST Group name, then press .

A confirmation message is displayed briefly.

3. Press Left Soft Key to Save Group.

4. Phone will automatically connect to server and

update Contact information.

5. Once saved in ST Contact list, select the newly

created group with .

6. To add a contact to the group, press Right Soft

Key for options, then to add buddy.

4. Recent SpeedTalk

Allows you to view the list of the Recent ST calls (up

to 10).

1. Press , , .

2. Icons show you whether the ST call was initiated

or received and individual or group.

5. SpeedTalk

Settings

Allows you to adjust your ST Settings.

5.1 SpeedTalk

On/Off

Allows you to set your ST availability.

allows both incoming and outgoing ST calls.

You can use all ST functions and receive all incoming

ST calls and alerts. shows on your idle screen.

Off

blocks all incoming ST calls.

When other parties try to place a ST call to your

number, ‘(Contact name) unavailable’ message will

appear on their screen.

SpeedTalk

UX390_Eng.qxd 7/7/06 6:01 PM Page 57

Also, the unavailable icon will appear next to your

name in their contact list.

shows on your idle screen.

1. Press , , , .

Set On

Off

with then press .

5.2 Speaker On/Off

Allows you to manually set you Speakerphone on/off

(performs the same function as the Speakerphone

key on the side of the phone).

1. Press , , , .

Set On

Off

with then press .

5.3 SpeedTalk

Alert Tone

Allows you to set the alert tone of SpeedTalk

Other than the default alert tone, a variety of

melodies are available.

1. Press , , , .

SpeedTalk

adjustable.

m) Alert

Note

You can adjust the alert tone volume through the master

volume (Settings -> Sounds -> Volume -> Ringer).

UX390_Eng.qxd 7/7/06 6:01 PM Page 58

easyedge

allows you to do more than just talk on

your phone. easyedge is service that allows you to

download and use applications on your phone. With

easyedge, it is quick and easy to personalize your

phone to your lifestyle and tastes. Just download the

applications that appeal to you. With a wide range of

products available, from ringtones to games to

products tools, you can be assured that you can find

something useful, practical, or down right

entertaining. There are new applications constantly

being created for your use.

Downloading Applications

You can download applications and use easyedge

wherever service is available, see map for details.

Incoming Calls

While downloading an application, incoming calls will

automatically be sent to your voice mail, if available.

If you do not have voice mail, downloading will not be

interrupted by an incoming call, and the caller will

receive a busy signal.

When using applications, an incoming call will

automatically pause the application and allow you to

answer the call. When you complete your call, you

can resume using the application.

Access and Options

1. Press Left Soft Key

2. Press

easyedge

3. Options from here:

easyedge

Help

easyedge

UX390_Eng.qxd 7/7/06 6:01 PM Page 59

1. easyedge

Allows you to download selected applications while

displaying the entire application list retrieved from

the easyedge server connection.

1. Press , , .

2. Press .

2. Help

Gives you information about the easyedge selection

key.

1. Press , , .

2. Press .

Managing Your easyedge Applications

Add new applications and remove old ones at any

time.

Removing easyedge Applications

By deleting an application you will restore memory

capacity to the phone. To restore an application once

it has been removed will require that you purchase

from the easyedge

shop.

1. Access easyedge.

2. Use to select Settings, then press .

3. Use to highlight Manage Apps, then press

4. Use to highlight the application to be

deleted, then press .

5. Use to select

Remove

, then press .

easyedge

Shortcut

Pressing the right arrow key will start easyedge.

Note

Contact U.S. Cellular© to add this service to your account.

UX390_Eng.qxd 7/7/06 6:01 PM Page 60

Media

This menu allows you to use a wide variety of images,

sounds, and more.

Access and Options

1. Press Left Soft Key

2. Press

Media

3. Select a sub-menu.

1. Images

2. Sounds

1. Images

Allows you to choose downloaded images to your

phone to display as the background image displayed

on the phone.

1. Press , , .

2. Use to highlight your selection, then press

and press Left Soft Key

Set As

to select.

2. Sounds

Allows you to choose the downloaded ring tones

heard for incoming calls.

1. Press , , .

2. Use to highlight your selection, then press

Left Soft Key

Set As

to select.

MEDIA

UX390_Eng.qxd 7/7/06 6:01 PM Page 61

Tools

Your phone tools include a Schedule, Alarm Clock,

Voice Memo, My Shortcut, Notepad, Ez Tip Calc,

Calculator, and World Clock.

Access and Options

1. Press Left Soft Key

2. Press

Tools

3. Select a sub-menu.

1. Schedule

2. Alarm Clock

3. Voice Memo

4. My Shortcut

5. Notepad

6. Ez Tip Calc

7. Calculator

8. World Clock

1. Schedule

Allows you to conveniently keep and access your

agenda(s). Simply store your appointments and your

phone will alert you with a reminder of your

appointment.

1. Press , , .

2. Use to highlight the scheduled day.

Moves cursor to the left.

Moves cursor to the right.

Moves to the previous week.

Moves to the next week.

3. Press Left Soft Key

Add

4. Enter your schedule information including:

●

Date

●

Time

●

Contents

●

Voice

●

Recurring event

●

When to ring the alarm reminder

●

Which ring alarm to sound

5. Press Left Soft Key

Save

TOOLS

UX390_Eng.qxd 7/7/06 6:01 PM Page 62

2. Alarm Clock

Allows you to set one of four alarms. The current

time is displayed at the top of the screen when you

select an alarm to set. At the alarm time, Alarm 1 (or

2 or 3, as applicable) will be displayed on the LCD

screen and the alarm will sound.

1. Press , , .

2. Select the alarm you want to edit.

Alarm 1/ Alarm 2/ Alarm 3/

Quick Alarm

3. Use to highlight the alarm time then press

4. Set the time for alarm and press .

5. Use to highlight Once (recurring setting) and

press .

6. Press to select one of the following and

press .

Once/ Daily/ Mon - Fri/ Weekends

7. Use to highlight Ring (ring type setting) and

press .

8. Use to select one of the available alarm ring

types and press .

9. Press Left Soft Key

Save

TOOLS

Note

Schedule will not alert you during a call or during SMS

transmitting. It will sound the reminder after you exit a

call.

Note

In Quick Alarm option, you can select 10 min later/ 30

min later/ 1 hour later/ 3 hours later.

For example you can take a nap in the afternoon with the

quick alarm set to 30 min later. It will allow you to wake

up on time.

UX390_Eng.qxd 7/7/06 6:01 PM Page 63

3. Voice Memo

Allows you to add, listen to, and erase short verbal

reminders.

1. Press , , .

2. Press Left Soft Key New to record a new voice

memo.

3. Talk into the microphone, then press Left Soft Key

Done

or .

4. While the highlight is still on the recording, press

Right Soft Key

Options

to access the

following:

●

Edit Title

●

Memory Info

●

Set As

●

Erase

●

Erase All

To Playback a Voice Memo

1. Access Voice Memo, highlight the Voice Memo you

want to hear, then press .

2. Press Left Soft Key

Play

4. My Shortcut

Allows you to set a shortcut to

Recent Calls

Contacts

Tools

, or

Settings

using the Up Navigation

key.

1. Press , , .

An explanation message is displayed.

2. Press to continue.

3. Select the shortcut you want to set (press the

corresponding number or highlight it and press

5. Notepad

Allows you to add, read, edit, and erase notes to

yourself.

1. Press , , .

2. Press Left Soft Key

Add

to write a new note.

3. Type the note, then press .

A confirmation message displays briefly, then

displays your list of notes.

TOOLS

UX390_Eng.qxd 7/7/06 6:01 PM Page 64

Viewing a Notepad Entry

1. Access Notepad and highlight the entry.

2. To erase, press Right Soft Key

Options

●

Erase

●

Erase All

To edit highlight the entry, then press and

press Left Soft Key

Edit

6. Ez Tip Calc

Allows you to quickly and easily estimate the initial

amounts for a bill with the calculated amount of the

bill, the amount and percentage of the tip, and the

number of people as variables.

1. Press , , .

7. Calculator

Allows you to perform simple mathematical

calculations. You can enter numbers up to the fifth

decimal place.

1. Press , , .

2. Enter data.

●

Use keypad to enter numbers.

●

Use to enter decimals.

●

Use to enter plus/minus change.

●

Press Left Soft Key to clear the entry.

●

Press Right Soft Key to enter algebraic operators.

●

Use Navigation Key to enter operators.

●

Press to complete equation.

TOOLS

Note

Calculations can be made with up to 33 characters at one

time (e.g., 63+78-21 would be 8 characters).

UX390_Eng.qxd 7/7/06 6:01 PM Page 65

8. World Clock

Allows you to determine the current time in another

time zone or country.

1. Press , , .

2. Press Right Soft Key

Cities

to move the time

bar across the world map and display the

date/time in that location.

TOOLS

Note

Press Left Soft Key

Set DST

to display Daylight

Savings Time in the selected location.

UX390_Eng.qxd 7/7/06 6:01 PM Page 66

Settings

The Settings Menu has options to customize your

phone.

Access and Options

1. Press Left Soft Key

2. Press

Settings

3. Select a sub-menu.

1. Sounds

2. Display

3. System

4. Security

5. Call Setup

6. Data Settings

7. Voice Services

8. Location

1. Sounds

Options to customize the phone’s sounds.

1.1 Ringers

Allows you to assign ring tones for incoming calls.

1. Press , , , .

2. Select

Caller ID

No Caller ID

Restricted Calls

3. Use to select a ringer, then press .

1.2 Key Tone

Allows you to select the Key Tone type.

1. Press , , , .

2. Select a tone style, then press .

Beep

Comes out a beep sound, when you press

the keys.

English

Comes out a voice (English), when you

press the keys.

Spanish

Comes out a voice (Spanish), when you

press the keys.

SETTING

SETTINGS

UX390_Eng.qxd 7/7/06 6:01 PM Page 67

1.3 Volume

Allows you to set various volume settings.

1. Press , , , .

2. Select

Ringer

Earpiece

Key Beep

Speaker

Phone

3. Use to adjust the volume of the ringer, then

press to save the setting.

1.4 Message Alerts

Allows you to select the alert type for a new

message.

1. Press , , , .

2. Select

Voice Mail

Text Message/ Photo Msg

E-mail

Page.

3. Use to select a setting, then press .

1.5 Service Alerts

Allows you to set any of the 4 Alert options to On or Off.

1. Press , , , .

2. Select an alert option.

1.5.1 Service Change

Alerts you when service changes. Displays Entering

Service Area or Leaving Service Area message.

1.5.2 Minute Beep

Alerts you 10 seconds before the end of every

minute during a call.

1.5.3 Call Connect

Alerts you when the call is connected.

1.5.4 Back To Top

Alerts you when you scroll through the end of a

menu list.

3. Use to set

Off

, then press .

SETTING

SETTINGS

UX390_Eng.qxd 7/7/06 6:01 PM Page 68

1.6 Power On/Off Tone

Allows you to set the phone to sound a tone when

the phone is powered on and off.

1. Press , , , .

2. Use to set to

Off

, then press .

1.7 DTMF Length

Allows you to set the Key tone length and touch tone

playback speed.

1. Press , , , .

2. Select an option, then press .

Normal

Sends out a tone for a fixed period of

time even if you keep the key pressed.

Long

Sends out a continuous tone for as long

as you keep the key pressed.

2. Display

Options to customize the phone’s display screen.

2.1 Banner

Allows you to enter a string of up to 16 characters

which display on the LCD screen.

1. Press , , , .

2. Enter your banner text, then press .

2.2 Backlight

Allows you to set the duration for illuminating the

backlight. LCD and Key Light Timer are set separately.

2.2.1 LCD

1. Press , , , , .

2. Choose a sub-menu, then press .

Timer/ Brightness

SETTINGS

Note

If an amount of time is set for the timer option, the time

starts after the last key was pressed.

Note

Dual-Tone Multi Frequency (DTMF) Signaling by the

simultaneous transmission of two tones, one from a group

of low frequencies and another from a group of high

frequencies. Each group of frequencies consists of four

frequencies. Setting the Key Beep length to Long will

extend the DTMF tone.

UX390_Eng.qxd 7/7/06 6:01 PM Page 69

2.2.2 Key Light Timer

1. Press , , , , .

2. Choose a setting, then press .

7 seconds/ 15 seconds/ Always on/ Always off

2.3 Screens

Allows you to choose the kind of background to be

displayed on the phone.

1. Press , , , .

2. Select

Wallpaper

Power On

Power Off,

then

press .

3. Select from different screens, then press .

4. Press .

5. Left Soft Key

Save

2.4 Menu Style

Allows you to view the Menu as an Icon or List

display.

1. Press , , , .

2. Select

Icon

List

and press .

2.5 Clocks

Allows you to choose the kind of clock to be

displayed on the LCD screen.

1. Press , , , .

2. Select

Normal

Analog

Digital

, then press .

3. Press Left Soft Key

Save

2.6 Theme Colors

Allows you to choose the color of the background

screen.

1. Press , , , .

2. Select

Default

Green

Violet

Orange

, then

press .

SETTINGS

Note

Right Soft Key

, provides access to additional

choices.

UX390_Eng.qxd 7/7/06 6:01 PM Page 70

2.7 Contrast

Allows you to set the level of contrast for your LCD

screen.

1. Press , , , .

2. Choose a Contrast sub-menu and press .

Main LCD/ Front LCD

3. Use to adjust the contrast level, then press

2.8 Fonts

Allows you to set the size and color of the font for

calling digits and text editor.

2.8.1 Calling Digits

1. Press , , , , .

2. Select

Size

Color

sub-menu.

Size

Color

3. Press to choose a setting, then press to

save.

2.8.2 Text Editor

1. Press , , , , .

2. Select

Size

Color

sub-menu.

Size

Color

3. Press to choose a setting, then press to

save.

2.9 Language

Allows you to set the bilingual feature according to

your preference. Choose between English and

Spanish.

1. Press , , , .

2. Use to select

English

Spanish

, then press

SETTINGS

UX390_Eng.qxd 7/7/06 6:01 PM Page 71

2.0 Power Saver

Display and buttons are lighted for a designated

length of time, allowing you of the convenience to

use your mobile phone in the dark.

1. Press , , , .

2. Use to select

2 min

10 min

30 min

Off

then press .

3. System

The System menu allows you to designate specific

system network settings.

3.1 Select System

Allows you to set up the phone producer’s

management environment. Leave this setting as the

default unless you want to alter system selection as

instructed by your service provider.

1. Press , , , .

2. Use to select

Home Only

Automatic A

Automatic B

, then press .

3.2 Set NAM

Allows you to select the phone’s NAM (Number

Assignment Module) if the phone is registered with

multiple service providers.

1. Press , , , .

2. Use to select

NAM1

NAM2

, then press

3.3 Auto NAM

Allows the phone to automatically switch between

programmed telephone numbers corresponding to

the service provider area.

1. Press , , , .

2. Use to select

Off

, then press .

3.4 Serving System

Identifies the channel number of a system that is

served as a SID Number. This information should only

be used for technical support.

1. Press , , , .

SETTINGS

UX390_Eng.qxd 7/7/06 6:01 PM Page 72

4. Security

The Security menu allows you to secure the phone

electronically.

4.1 Lock Phone

Keeps your phone from unauthorized use. Once the

phone is locked, it is in restricted mode until the lock

code is entered. You can receive phone calls and still

make emergency calls.

You can modify the lock code using the New Lock

code within the Security menu.

1. Press , , .

2. Enter the four-digit lock code.

The default lock code is commonly the last 4

digits of your phone number.

3. Press

Lock Phone

4. Use to select an option, then press .

Unlock

The phone is never locked

(Lock mode can be used).

Lock

The phone is always locked.

When locked, you can receive

incoming calls and make only

emergency calls.

On Power Up

The phone is locked when it is

turned on.

4.2 Restrict Calls

Allows you to restrict incoming and outgoing calls. If

you set this feature to

Outgoing Only

, you can only

place calls to emergency numbers and phone

numbers stored in your Contacts.

1. Press , , .

2. Enter the four-digit lock code.

3. Press

Restrict Calls

4. Use to select

Off

, then press .

SETTINGS

Note

You can receive the incoming calls from saved contacts on

your phone, when Incoming Only is on.

UX390_Eng.qxd 7/7/06 6:01 PM Page 73

4.3 Emergency #s

Allows you to enter 3 emergency numbers. You can

call these emergency numbers and 911, even when

the phone is locked or restricted.

1. Press , , .

2. Enter the four-digit lock code.

3. Press

Emergency #s

4. Use to select the emergency number

position, then press .

5. Enter an emergency phone number, then press .

4.4 Change Lock

Allows you to enter a new four-digit lock code.

1. Press , , .

2. Enter the four-digit lock code.

3. Press

Change Lock

4. Enter a new 4-digit lock code.

5. For confirmation, it will ask you to enter the new

lock code again.

4.5 Erase Contacts

Allows you to erase all of your Contacts at once.

1. Press , , .

2. Enter the four-digit lock code.

3. Press

Erase Contacts

4. Select

Erase all #s

then press .

4.6 Reset Default

Allows you to reset your phone to the factory default

settings.

1. Press , , .

2. Enter the four-digit lock code.

3. Press

Reset Default

4. Press .

5. Press

Revert

SETTINGS

UX390_Eng.qxd 7/7/06 6:01 PM Page 74

5. Call Setup

The Call Setup menu allows you to designate how the

phone handles both incoming and outgoing calls.

5.1 Auto Retry

Allows you to set the length of time the phone waits

before automatically redialing a number when the

attempted call fails.

1. Press , , , .

2. Use to select a setting, then press .

Off/ Every 10 seconds/ Every 30 seconds/

Every 60 seconds

5.2 Answer Call

Allows you to determine how to handle an answered

call.

1. Press , , , .

2. Use to select a setting, then press .

Flip Open/ Any Key/ SEND Only

5.3 Auto Answer

Allows you to select the number of rings before the

phone automatically answers a call. This feature is

intended for use with hands free devices, but is an

independent feature of the phone and must be

manually turned on/off when connected or

disconnected from the device.

1. Press , , , .

2. Use to select a setting, then press .

●

Off

●

After 5 seconds

When you have an incoming

call, the phone automatically responds after 5

seconds with the flip opened.

5.4 One-Touch Dial

Allows you to initiate a speed dial call by pressing

and holding the speed dial digit. If set to Disable,

Speed Dial numbers designated in your Contacts will

not function.

1. Press , , , .

2. Use to select a setting, then press .

Enable/ Disable

SETTINGS

UX390_Eng.qxd 7/7/06 6:01 PM Page 75

5.5 Voice Privacy

Allows you to set the voice privacy feature for CDMA

calls as Enhanced or Standard. CDMA offers inherent

voice privacy. Check with your service provider for

availability.

1. Press , , , .

2. Use to select a setting, then press .

Enhanced/ Standard

5.6 Auto Volume

Provides a better audio experience by enabling the

Auto Volume feature to control the dynamic range

and volume of the sending and receiving voice across

different levels of speaker and environments.

1. Press , , , .

2. Use to select a setting, then press .

On/ Off

5.7 TTY Mode

Allows you to attach a TTY (Teletype writer) device

enabling you to communicate with parties also using

a TTY device. A phone with TTY support is able to

translate typed characters to voice. Voice can also be

translated into characters and then displayed on the

TTY.

1. Press , , , .

2. Press .

3. Use to select a setting, then press .

TTY Full/ TTY + TALK/ TTY + HEAR/ TTY Off

5.8 Airplane Mode

Allows you to use the general application and

restricts the output of RF communication.

1. Press , , , .

2. Use to select a setting, then press .

On/ Off

SETTINGS

UX390_Eng.qxd 7/7/06 6:01 PM Page 76

6. Data Settings

This menu allows you to use wireless data

communication services. Wireless data

communication services refers to the utilization of

subscriber terminals for access to the internet with

personal computers or laptops at 19.2 Kbps or at a

maximum of 230.4 Kbps. The connection speed

depends on your carrier’s network and other

variables. Check that communications information

specifications match the network.

6.1 PC Connection

Allows you to select the data port.

1. Press , , , .

2. Use to select a setting, then press .

USB/ RS-232C(COM Port)/ Closed

7. Voice Services

Allows you to select options for voice activation,

announce alerts and recognition results; and enables

you to adapt the phone to recognize your way of

saying numbers.

7.1 Voice Commands

Allows you to set how you activate voice recognition.

1. Press , , , .

2. Use to select a setting, then press .

●

Flip Open

Activates voice recognition whenever

you flip open the phone. (When the phone is

already open, you activate voice recognition by

pressing the voice command key.)

●

Side Key Only

Activates voice recognition when

you flip open the phone and press the voice

command key.

SETTINGS

UX390_Eng.qxd 7/7/06 6:01 PM Page 77

7.2 Sound Modes

Allows you to set Driving Mode/Announce Mode.

1. Press , , , .

2. Use to select a setting, then press .

Driving Mode

Announce Mode

Normal Mode

For example,

1) Press Left Soft Key

2) Main menu screen appears, phone announces

“Main menu”.

3) Then, phone announces the first menu item

that is highlighted.

4) When the cursor is moved, the highlighted

menu item is announced.

5) Menu readout only to the first sub-level.

7.3 Announce Alerts

Allows you to notify caller ID and sender of message

by voice.

1. Press , , , .

2. Use to select a setting, then press .

Off

7.4 Best Match

After you say a name or a number, your phone

displays the recognition results—the name or

number that best matches the one you said—and

asks you to confirm. Select the number of results that

you want your phone to display.

1. Press , , , .

2. Use to select a setting, the press .

●

1 Result

Displays the name or number that

best matches the one you said.

SETTINGS

Note

When Announce Alerts is set, is displayed on the

screen.

UX390_Eng.qxd 7/7/06 6:01 PM Page 78

●

4 Results

Displays the four names or numbers

that best match the one you said and asks you

if the first one is correct. If you say "Yes," the

phone makes the call. If you say "No," the

phone suggests the second one in the list, and

so on, up to the fourth result.

7.5 Train Words

Command Train is an optional personalization feature

that helps your phone recognize the way you

pronounce commands. If you do not get consistent

good results with the commands, perform this brief,

one-time session.

1. Press , , , .

2. Select a sub-menu, then press .

Commands

Digits

Yes, No

Contacts

Phone Label

3. Use to select a setting, then press .

Training On

Training Off

7.6 Help

Helps you to use the Voice menu. Activate it by

following the instructions.

1. Press , , , .

8. Location

Menu for GPS (Global Positioning System: Satellite

assisted location information system) mode.

1. Press , , .

2. Use to select a setting, then press .

Location On

E911 Only

SETTINGS

Note

GPS satellite signals are not always transmitted, especially

under bad atmospheric and environmental conditions,

indoors etc.

UX390_Eng.qxd 7/7/06 6:01 PM Page 79

Phone Info

The Phone Info menu provides you with specific

information pertaining to your phone model.

Access and Options

1. Press Left Soft Key

2. Press

Phone Info

3. Select a sub-menu.

1. My Phone Number

2. S/W Version

3. Icon Glossary

4. Shortcut Help

1. My Phone Number

Allows you to view your phone number.

1. Press , , .

2. S/W Version

Allows you to view the software, PRL, easyedge and

VR.

1. Press , , .

3. Icon Glossary

Allows you to view all the icons and their meanings.

1. Press , , .

4. Shortcut Help

Allows you to view condensed information about

using the phone.

1. Press , , .

PHONE INFO

UX390_Eng.qxd 7/7/06 6:01 PM Page 80

TIA Safety Information

The following is the complete TIA Safety Information

for wireless handheld phones.

Exposure to Radio Frequency Signal

Your wireless handheld portable phone is a low power

radio transmitter and receiver. When ON, it receives

and sends out Radio Frequency (RF) signals.

In August, 1996, the Federal Communications

Commissions (FCC) adopted RF exposure guidelines

with safety levels for handheld wireless phones.

Those guidelines are consistent with the safety

standards previously set by both U.S. and

international standards bodies:

ANSI C95.1 (1992) *

NCRP Report 86 (1986)

ICNIRP (1996)

* American National Standards Institute; National

Council on Radiation Protection and Measurements;

International Commission on Non-Ionizing Radiation

Protection

Those standards were based on comprehensive and

periodic evaluations of the relevant scientific

literature. For example, over 120 scientists, engineers,

and physicians from universities, government health

agencies, and industry reviewed the available body of

research to develop the ANSI Standard (C95.1).

The design of your phone complies with the FCC

guidelines (and those standards).

Antenna Care

Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications, or

attachments could damage the phone and may

violate FCC regulations.

Phone Operation

NORMAL POSITION: Hold the phone as you would

any other telephone with the antenna pointed up

and over your shoulder.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 81

Tips on Efficient Operation

For your phone to operate most efficiently:

Don’t touch the antenna unnecessarily when the

phone is in use. Contact with the antenna affects call

quality and may cause the phone to operate at a

higher power level than otherwise needed.

Driving

Check the laws and regulations on the use of wireless

phones in the areas where you drive and always obey

them. Also, if using your phone while driving, please

observe the following:

●

Give full attention to driving -- driving safely is

your first responsibility;

●

Use hands-free operation, if available;

●

Pull off the road and park before making or

answering a call if driving conditions or the law

require it.

Electronic Devices

Most modern electronic equipment is shielded from

RF signals. However, certain electronic equipment

may not be shielded against the RF signals from your

wireless phone.

Pacemakers

The Health Industry Manufacturers Association

recommends that a minimum separation of six (6)

inches be maintained between a handheld wireless

phone and a pacemaker to avoid potential

interference with the pacemaker. These

recommendations are consistent with the

independent research by and recommendations of

Wireless Technology Research.

Persons with pacemakers:

●

Should ALWAYS keep the phone more than six (6)

inches from their pacemaker when the phone is

turned ON;

●

Should not carry the phone in a breast pocket;

●

Should use the ear opposite the pacemaker to

minimize the potential for interference;

●

Should turn the phone OFF immediately if there is

any reason to suspect that interference is taking

place.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 82

Hearing Aids

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you

may want to consult your service provider (or call the

customer service line to discuss alternatives).

Other Medical Devices

If you use any other personal medical device, consult

the manufacturer of your device to determine if it is

adequately shielded from external RF energy. Your

physician may be able to assist you in obtaining this

information.

Health Care Facilities

Turn your phone OFF in health care facilities when

any regulations posted in these areas instruct you to

do so. Hospitals or health care facilities may use

equipment that could be sensitive to external RF

energy.

Vehicles

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer or its

representative regarding your vehicle. You should

also consult the manufacturer of any equipment that

has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted

notices so require.

Aircraft

FCC regulations prohibit using your phone while in

the air. Switch OFF your phone before boarding an

aircraft.

Blasting Areas

To avoid interfering with blasting operations, turn

your phone OFF when in a “blasting area” or in areas

posted: “Turn off two-way radio”. Obey all signs and

instructions.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 83

Potentially Explosive Atmosphere

Turn your phone OFF when in any area with a

potentially explosive atmosphere and obey all signs

and instructions. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even

death.

Areas with a potentially explosive atmosphere are

often, but not always marked clearly. Potential areas

may include: fueling areas (such as gasoline stations);

below deck on boats; fuel or chemical transfer or

storage facilities; vehicles using liquefied petroleum

gas (such as propane or butane); areas where the air

contains chemicals or particles (such as grain, dust,

or metal powders); and any other area where you

would normally be advised to turn off your vehicle

engine.

For Vehicles Equipped with an Air Bag

An air bag inflates with great force. DO NOT place

objects, including either installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. If in-vehicle wireless equipment

is improperly installed and the air bag inflates, serious

injury could result.

Safety Information

Please read and observe the following information for

safe and proper use of your phone and to prevent

damage. Also, keep the user guide in an accessible

place at all times after reading it.

Ca ution!

iioollaattiioonn ooff tthhee iinnssttrruuccttiioonnss mmaayy

ccaauussee mmiinnoorr oorr sseerriioouuss ddaammaaggee ttoo tthhee pprroodduucctt..

Charger and Adapter Safety

●

The charger and adapter are intended for indoor

use only.

●

Insert the battery pack charger vertically into the

wall power socket.

●

Use the correct adapter for your phone when

using the battery pack charger abroad.

●

Only use the approved battery charger. Otherwise,

you may cause serious damage to your phone.

Battery Information and Care

●

Please dispose of your battery properly or take it

to your local wireless carrier for recycling.

●

The battery doesn't need to be empty before

recharging.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 84

●

Use only LG-approved chargers specific to your

phone model since they are designed to maximize

battery life.

●

Do not disassemble or short-circuit the battery.

●

Keep the battery’s metal contacts clean.

●

Replace the battery when it no longer provides

acceptable performance. The battery can be

recharged several hundred times before replacement.

●

Recharge the battery after long periods of non-use

to maximize battery life.

●

Battery life will vary due to usage patterns and

environmental conditions.

●

Use of extended backlighting, Browser, and data

connectivity kits affect battery life and

talk/standby times.

●

The self-protection function of the battery cuts the

power of the phone when its operation is in an

abnormal state. In this case, remove the battery

from the phone, reinstall it, and turn the phone on.

Explosion, Shock, and Fire Hazards

●

Do not put your phone in a place subject to

excessive dust and keep the minimum required

distance between the power cord and heat sources.

●

Unplug the power cord prior to cleaning your

phone, and clean the power plug pin when it’s dirty.

●

When using the power plug, ensure that it’s firmly

connected. If not, it may cause excessive heat or fire.

●

If you put your phone in a pocket or bag without

covering the receptacle of the phone (power plug

pin), metallic articles (such as a coin, paperclip or

pen) may short-circuit the phone. Always cover the

receptacle when not in use.

●

Don’t short-circuit the battery. Metallic articles

such as a coin, paperclip or pen in your pocket or

bag may short-circuit the + and – terminals of the

battery (metal strips on the battery) upon moving.

Short-circuit of the terminal may damage the

battery and cause an explosion.

●

Do not disassemble or crush the battery. It may

cause a fire.

General Notice

●

Using a damaged battery or placing a battery in

your mouth may cause serious injury.

●

Do not place items containing magnetic

components such as a credit card, phone card,

bank book, or subway ticket near your phone. The

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 85

magnetism of the phone may damage the data

stored in the magnetic strip.

●

Talking on your phone for a long period of time

may reduce call quality due to heat generated

during use.

●

When the phone is not used for a long period

time, store it in a safe place with the power cord

unplugged.

●

Using the phone in proximity to receiving

equipment (i.e., TV or radio) may cause

interference to the phone.

●

Do not use the phone if the antenna is damaged.

If a damaged antenna contacts skin, it may cause a

slight burn. Please contact an LG Authorized

Service Center to replace the damaged antenna.

●

Do not immerse your phone in water. If this

happens, turn it off immediately and remove the

battery. If the phone does not work, take it to an

LG Authorized Service Center.

●

Do not paint your phone.

●

The data saved in your phone might be deleted

due to careless use, repair of the phone, or

upgrade of the software. Please backup your

important phone numbers. (Ring tones, text

messages, voice messages, pictures, and videos

could also be deleted.) The manufacturer is not

liable for damage due to the loss of data.

●

When you use the phone in public places, set the

ringtone to vibration so you don't disturb others.

●

Do not turn your phone on or off when putting it

to your ear.

●

Use accessories, such as earphones and headsets,

with caution. Ensure that cables are tucked away

safely and do not touch the antenna unnecessarily.

If you are listening to music whilst out and about,

please ensure that the volume is at a reasonable level

so that you are aware of your surroundings. This is

particularly imperative when attempting to cross the

street.

Avoid damage to your hearing

Damage to your hearing can occur if you are exposed

to loud sound for long periods of time. We therefore

recommend that you do not turn on or off the

handset close to your ear. We also recommend that

music and call volumes are set to a reasonable level.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 86

FDA Consumer Update

The U.S. Food and Drug Administration’s Center for

Devices and Radiological Health Consumer Update

on Mobile Phones:

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that

any health problems are associated with using

wireless phones. There is no proof, however, that

wireless phones are absolutely safe. Wireless phones

emit low levels of Radio Frequency (RF) energy in the

microwave range while being used. They also emit

very low levels of RF when in standby mode. Whereas

high levels of RF can produce health effects (by

heating tissue), exposure to low level RF that does

not produce heating effects causes no known adverse

health effects. Many studies of low level RF exposures

have not found any biological effects. Some studies

have suggested that some biological effects may

occur, but such findings have not been confirmed by

additional research. In some cases, other researchers

have had difficulty in reproducing those studies, or in

determining the reasons for inconsistent results.

2. What is the FDA's role concerning the safety of

wireless phones?

Under the law, the FDA does not review the safety of

radiation-emitting consumer products such as

wireless phones before they can be sold, as it does

with new drugs or medical devices. However, the

agency has authority to take action if wireless phones

are shown to emit Radio Frequency (RF) energy at a

level that is hazardous to the user. In such a case, the

FDA could require the manufacturers of wireless

phones to notify users of the health hazard and to

repair, replace, or recall the phones so that the

hazard no longer exists.

Although the existing scientific data do not justify

FDA regulatory actions, the FDA has urged the

wireless phone industry to take a number of steps,

including the following:

●

Support needed research into possible biological

effects of RF of the type emitted by wireless

phones;

●

Design wireless phones in a way that minimizes any

RF exposure to the user that is not necessary for

device function; and

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 87

●

Cooperate in providing users of wireless phones

with the best possible information on possible

effects of wireless phone use on human health.

The FDA belongs to an interagency working group of

the federal agencies that have responsibility for

different aspects of RF safety to ensure coordinated

efforts at the federal level. The following agencies

belong to this working group:

●

National Institute for Occupational Safety and

Health

●

Environmental Protection Agency

●

Occupational Safety and Health Administration

●

National Telecommunications and Information

Administration

The National Institutes of Health participates in

some interagency working group activities, as well.

The FDA shares regulatory responsibilities for wireless

phones with the Federal Communications

Commission (FCC). All phones that are sold in the

United States must comply with FCC safety

guidelines that limit RF exposure. The FCC relies on

the FDA and other health agencies for safety

questions about wireless phones.

The FCC also regulates the base stations that the

wireless phone networks rely upon. While these base

stations operate at higher power than do the wireless

phones themselves, the RF exposures that people get

from these base stations are typically thousands of

times lower than those they can get from wireless

phones. Base stations are thus not the subject of the

safety questions discussed in this document.

3. What kinds of phones are the subject of this

update?

The term “wireless phone” refers here to handheld

wireless phones with built-in antennas, often called

“cell”, “mobile”, or “PCS” phones. These types of

wireless phones can expose the user to measurable

Radio Frequency (RF) energy because of the short

distance between the phone and the user’s head.

These RF exposures are limited by FCC safety

guidelines that were developed with the advice of the

FDA and other federal health and safety agencies.

When the phone is located at greater distances from

the user, the exposure to RF is drastically lower

because a person's RF exposure decreases rapidly

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 88

with increasing distance from the source. The so-

called “cordless phones,” which have a base unit

connected to the telephone wiring in a house,

typically operate at far lower power levels, and thus

produce RF exposures far below the FCC safety

limits.

4. What are the results of the research done

already?

The research done thus far has produced conflicting

results, and many studies have suffered from flaws in

their research methods. Animal experiments

investigating the effects of Radio Frequency (RF)

energy exposures characteristic of wireless phones

have yielded conflicting results that often cannot be

repeated in other laboratories. A few animal studies,

however, have suggested that low levels of RF could

accelerate the development of cancer in laboratory

animals. However, many of the studies that showed

increased tumor development used animals that had

been genetically engineered or treated with cancer-

causing chemicals so as to be pre-disposed to

develop cancer in the absence of RF exposure. Other

studies exposed the animals to RF for up to 22 hours

per day. These conditions are not similar to the

conditions under which people use wireless phones,

so we do not know with certainty what the results of

such studies mean for human health. Three large

epidemiology studies have been published since

December 2000. Between them, the studies

investigated any possible association between the

use of wireless phones and primary brain cancer,

glioma, meningioma, or acoustic neuroma, tumors of

the brain or salivary gland, leukemia, or other

cancers. None of the studies demonstrated the

existence of any harmful health effects from wireless

phone RF exposures. However, none of the studies

can answer questions about long-term exposures,

since the average period of phone use in these

studies was around three years.

5. What research is needed to decide whether RF

exposure from wireless phones poses a health risk?

A combination of laboratory studies and

epidemiological studies of people actually using

wireless phones would provide some of the data that

are needed. Lifetime animal exposure studies could

be completed in a few years. However, very large

numbers of animals would be needed to provide

reliable proof of a cancer promoting effect if one

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 89

exists. Epidemiological studies can provide data that

is directly applicable to human populations, but ten

or more years follow-up may be needed to provide

answers about some health effects, such as cancer.

This is because the interval between the time of

exposure to a cancer-causing agent and the time

tumors develop — if they do — may be many, many

years. The interpretation of epidemiological studies is

hampered by difficulties in measuring actual RF

exposure during day-to-day use of wireless phones.

Many factors affect this measurement, such as the

angle at which the phone is held, or which model of

phone is used.

6. What is the FDA doing to find out more about

the possible health effects of wireless phone RF?

The FDA is working with the U.S. National Toxicology

Program and with groups of investigators around the

world to ensure that high priority animal studies are

conducted to address important questions about the

effects of exposure to Radio Frequency (RF) energy.

The FDA has been a leading participant in the World

Health Organization International Electro Magnetic

Fields (EMF) Project since its inception in 1996. An

influential result of this work has been the

development of a detailed agenda of research needs

that has driven the establishment of new research

programs around the world. The project has also

helped develop a series of public information

documents on EMF issues.

The FDA and the Cellular Telecommunications &

Internet Association (CTIA) have a formal

Cooperative Research And Development Agreement

(CRADA) to do research on wireless phone safety.

The FDA provides the scientific oversight, obtaining

input from experts in government, industry, and

academic organizations. CTIA-funded research is

conducted through contracts with independent

investigators. The initial research will include both

laboratory studies and studies of wireless phone

users. The CRADA will also include a broad

assessment of additional research needs in the

context of the latest research developments around

the world.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 90

7. How can I find out how much Radio Frequency

energy exposure I can get by using my wireless

phone?

All phones sold in the United States must comply with

Federal Communications Commission (FCC)

guidelines that limit Radio Frequency (RF) energy

exposures. The FCC established these guidelines in

consultation with the FDA and the other federal

health and safety agencies. The FCC limit for RF

exposure from wireless phones is set at a Specific

Absorption Rate (SAR) of 1.6 watts per kilogram (1.6

W/kg). The FCC limit is consistent with the safety

standards developed by the Institute of Electrical and

Electronic Engineering (IEEE) and the National

Council on Radiation Protection and Measurement.

The exposure limit takes into consideration the body’s

ability to remove heat from the tissues that absorb

energy from the wireless phone and is set well below

levels known to have effects. Manufacturers of wireless

phones must report the RF exposure level for each

model of phone to the FCC. The FCC website

(

http://www.fcc.gov/oet/rfsafety) gives directions for

locating the FCC identification number on your phone

so you can find your phone’s RF exposure level in the

online listing.

8. What has the FDA done to measure the Radio

Frequency energy coming from wireless phones?

The Institute of Electrical and Electronic Engineers

(IEEE) is developing a technical standard for

measuring the Radio Frequency (RF) energy exposure

from wireless phones and other wireless handsets

with the participation and leadership of FDA

scientists and engineers. The standard,

“Recommended Practice for Determining the Spatial-

Peak Specific Absorption Rate (SAR) in the Human

Body Due to Wireless Communications Devices:

Experimental Techniques”, sets forth the first

consistent test methodology for measuring the rate

at which RF is deposited in the heads of wireless

phone users. The test method uses a tissue-

simulating model of the human head. Standardized

SAR test methodology is expected to greatly improve

the consistency of measurements made at different

laboratories on the same phone. SAR is the

measurement of the amount of energy absorbed in

tissue, either by the whole body or a small part of

the body. It is measured in watts/kg (or milliwatts/g)

of matter. This measurement is used to determine

whether a wireless phone complies with safety

guidelines.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 91

9. What steps can I take to reduce my exposure to

Radio Frequency energy from my wireless phone?

If there is a risk from these products — and at this

point we do not know that there is — it is probably

very small. But if you are concerned about avoiding

even potential risks, you can take a few simple steps

to minimize your exposure to Radio Frequency (RF)

energy. Since time is a key factor in how much

exposure a person receives, reducing the amount of

time spent using a wireless phone will reduce RF

exposure. If you must conduct extended

conversations by wireless phone every day, you could

place more distance between your body and the

source of the RF, since the exposure level drops off

dramatically with distance. For example, you could

use a headset and carry the wireless phone away

from your body or use a wireless phone connected to

a remote antenna. Again, the scientific data do not

demonstrate that wireless phones are harmful. But if

you are concerned about the RF exposure from these

products, you can use measures like those described

above to reduce your RF exposure from wireless

phone use.

10. What about children using wireless phones?

The scientific evidence does not show a danger to

users of wireless phones, including children and

teenagers. If you want to take steps to lower

exposure to Radio Frequency (RF) energy, the

measures described above would apply to children

and teenagers using wireless phones. Reducing the

time of wireless phone use and increasing the

distance between the user and the RF source will

reduce RF exposure.

Some groups sponsored by other national

governments have advised that children be

discouraged from using wireless phones at all. For

example, the government in the United Kingdom

distributed leaflets containing such a

recommendation in December 2000. They noted

that no evidence exists that using a wireless phone

causes brain tumors or other ill effects. Their

recommendation to limit wireless phone use by

children was strictly precautionary; it was not based

on scientific evidence that any health hazard exists.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 92

11. What about wireless phone interference with

medical equipment?

Radio Frequency (RF) energy from wireless phones

can interact with some electronic devices. For this

reason, the FDA helped develop a detailed test

method to measure Electro Magnetic Interference

(EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test

method is now part of a standard sponsored by the

Association for the Advancement of Medical

Instrumentation (AAMI). The final draft, a joint effort

by the FDA, medical device manufacturers, and many

other groups, was completed in late 2000. This

standard will allow manufacturers to ensure that

cardiac pacemakers and defibrillators are safe from

wireless phone EMI.

The FDA has tested hearing aids for interference from

handheld wireless phones and helped develop a

voluntary standard sponsored by the Institute of

Electrical and Electronic Engineers (IEEE). This

standard specifies test methods and performance

requirements for hearing aids and wireless phones so

that no interference occurs when a person uses a

“compatible” phone and a “compatible” hearing aid

at the same time. This standard was approved by the

IEEE in 2000.

The FDA continues to monitor the use of wireless

phones for possible interactions with other medical

devices. Should harmful interference be found to

occur, the FDA will conduct testing to assess the

interference and work to resolve the problem.

12. Where can I find additional information?

For additional information, please refer to the

following resources:

FDA web page on wireless phones

(http://www.fda.gov/cellphones/)

Federal Communications Commission (FCC) RF

Safety Program

(http://www.fcc.gov/oet/rfsafety)

International Commission on Non-lonizing Radiation

Protection

(http://www.icnirp.de)

World Health Organization (WHO) International EMF

Project

(http://www.who.int/emf)

National Radiological Protection Board (UK)

(http://www.hpa.org.uk/radiation/)

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 93

10 Driver Safety Tips

Your wireless phone gives you the powerful ability to

communicate by voice almost anywhere, anytime. An

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When operating a car, driving is your first

responsibility. When using your wireless phone

behind the wheel of a car, practice good common

sense and remember the following tips:

1. Get to know your wireless phone and its features

such as speed dial and redial. Carefully read your

instruction manual and learn to take advantage of

valuable features most phones offer, including

automatic redial and memory. Also, work to

memorize the phone keypad so you can use the

speed dial function without taking your attention

off the road.

2. When available, use a hands-free device. A number

of hands-free wireless phone accessories are

readily available today. Whether you choose an

installed mounted device for your wireless phone

or a speaker phone accessory, take advantage of

these devices if available to you.

3. Make sure you place your wireless phone within

easy reach and where you can reach it without

removing your eyes from the road. If you get an

incoming call at an inconvenient time, if possible,

let your voicemail answer it for you.

4. Suspend conversations during hazardous driving

conditions or situations. Let the person you are

speaking with know you are driving; if necessary,

suspend the call in heavy traffic or hazardous

weather conditions. Rain, sleet, snow, and ice can be

hazardous, but so is heavy traffic. As a driver, your

first responsibility is to pay attention to the road.

5. Don’t take notes or look up phone numbers while

driving. If you are reading an address book or

business card, or writing a “to-do” list while driving

a car, you are not watching where you are going. It

is common sense. Do not get caught in a

dangerous situation because you are reading or

writing and not paying attention to the road or

nearby vehicles.

6. Dial sensibly and assess the traffic; if possible,

place calls when you are not moving or before

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 94

pulling into traffic. Try to plan your calls before

you begin your trip or attempt to coincide your

calls with times you may be stopped at a stop

sign, red light, or otherwise stationary. But if you

need to dial while driving, follow this simple tip --

dial only a few numbers, check the road and your

mirrors, then continue.

7. Do not engage in stressful or emotional

conversations that may be distracting. Stressful or

emotional conversations and driving do not mix;

they are distracting and even dangerous when you

are behind the wheel of a car. Make people you

are talking with aware you are driving and if

necessary, suspend conversations which have the

potential to divert your attention from the road.

8. Use your wireless phone to call for help. Your

wireless phone is one of the greatest tools you can

own to protect yourself and your family in

dangerous situations -- with your phone at your

side, help is only three numbers away. Dial 911 or

other local emergency number in the case of fire,

traffic accident, road hazard, or medical

emergency. Remember, it’s a free call on your

wireless phone!

9. Use your wireless phone to help others in

emergencies. Your wireless phone provides you a

perfect opportunity to be a “Good Samaritan” in

your community. If you see an auto accident, crime

in progress or other serious emergency where lives

are in danger, call 911 or other local emergency

number, as you would want others to do for you.

10. Call roadside assistance or a special wireless non-

emergency assistance number when necessary.

Certain situations you encounter while driving

may require attention, but are not urgent enough

to merit a call for emergency services. But you

can still use your wireless phone to lend a hand.

If you see a broken-down vehicle posing no

serious hazard, a broken traffic signal, a minor

traffic accident where no one appears injured or a

vehicle you know to be stolen, call roadside

assistance or other special non-emergency

wireless number.

For more information, please call to 888-901-SAFE,

or visit our website http://www.ctia.org.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 95

Consumer Information on SAR

(Specific Absorption Rate)

This model phone meets the government's

requirements for exposure to radio waves. Your

wireless phone is a radio transmitter and receiver. It is

designed and manufactured not to exceed the

emission limits for exposure to Radio Frequency (RF)

energy set by the Federal Communications

Commission of the U.S. Government. These limits are

part of comprehensive guidelines and establish

permitted levels of RF energy for the general

population. The guidelines are based on standards

that were developed by independent scientific

organizations through periodic and thorough

evaluation of scientific studies. The standards include

a substantial safety margin designed to assure the

safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the

FCC is 1.6 W/kg. Tests for SAR are conducted using

standard operating positions specified by the FCC

with the phone transmitting at its highest certified

power level in all tested frequency bands. Although

SAR is determined at the highest certified power

level, the actual SAR level of the phone while

operating can be well below the maximum value.

Because the phone is designed to operate at multiple

power levels to use only the power required to reach

the network, in general, the closer you are to a

wireless base station antenna, the lower the power

output.

Before a phone model is available for sale to the

public, it must be tested and certified to the FCC

that it does not exceed the limit established by the

government-adopted requirement for safe exposure.

The tests are performed in positions and locations

(e.g., at the ear and worn on the body) as required

by the FCC for each model.

The highest SAR value for this model phone when

tested for use at the ear is 1.21 W/kg and when

worn on the body, as described in this user guide, is

1.28W/kg (body-worn measurements differ among

phone models, depending upon available accessories

and FCC requirements). While there may be

differences between SAR levels of various phones and

at various positions, they all meet the government

requirement for safe exposure.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 96

The FCC has granted an Equipment Authorization for

this model phone with all reported SAR levels

evaluated as in compliance with the FCC RF emission

guidelines. SAR information on this model phone is

on file with the FCC and can be found under the

Display Grant section of

http://www.fcc.gov/oet/fccid after searching on FCC

ID BEJVX4700. Additional information on Specific

Absorption Rates (SAR) can be found on the Cellular

Telecommunications Industry Association (CTIA)

http://www.ctia.org/

In the United States and Canada, the SAR limit for

mobile phones used by the public is 1.6 watts/kg

(W/kg) averaged over one gram of tissue. The

standard incorporates a substantial margin of safety

to give additional protection for the public and to

account for any variations in measurements.

FCC Hearing-Aid Compatibility (HAC)

Regulations for Wireless Devices

On July 10, 2003, the U.S. Federal Communications

Commission (FCC) Report and Order in WT Docket

01-309 modified the exception of wireless phones

under the Hearing Aid Compatibility Act of 1988

(HAC Act) to require digital wireless phones be

compatible with hearing-aids. The intent of the HAC

Act is to ensure reasonable access to

telecommunications services for persons with hearing

disabilities.

While some wireless phones are used near some

hearing devices (hearing aids and cochlear implants),

users may detect a buzzing, humming, or whining

noise. Some hearing devices are more immune than

others to this interference noise, and phones also

vary in the amount of interference they generate.

The wireless telephone industry has developed a

rating system for wireless phones, to assist hearing

device users to find phones that may be compatible

with their hearing devices. Not all phones have been

rated. Phones that are rated have the rating on their

box or a label located on the box.

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 97

The ratings are not guarantees. Results will vary

depending on the user's hearing device and hearing

loss. If your hearing device happens to be vulnerable

to interference, you may not be able to use a rated

phone successfully. Trying out the phone with your

hearing device is the best way to evaluate it for your

personal needs.

M-Ratings: Phones rated M3 or M4 meet FCC

requirements and are likely to generate less

interference to hearing devices than phones that are

not labeled. M4 is the better/higher of the two

ratings.

Hearing devices may also be rated. Your hearing

device manufacturer or hearing health professional

may help you find this rating. Higher ratings mean

that the hearing device is relatively immune to

interference noise. The hearing aid and wireless

phone rating values are then added together. A sum

of 5 is considered acceptable for normal use. A sum

of 6 is considered for best use.

In the above example, if a hearing aid meets the M2

level rating and the wireless phone meets the M3

level rating, the sum of the two values equal M5. This

should provide the hearing aid user with “normal

usage” while using their hearing aid with the

particular wireless phone. “Normal usage” in this

context is defined as a signal quality that is

acceptable for normal operation.

The M mark is intended to be synonymous with the

U mark. The T mark is intended to be synonymous

with the UT mark. The M and T marks are

recommended by the Alliance for

Telecommunications Industries Solutions (ATIS). The

U and UT marks are referenced in Section 20.19 of

the FCC Rules. The HAC rating and measurement

procedure are described in the American National

SAFETY

UX390_Eng.qxd 7/7/06 6:01 PM Page 98

SAFETY

Standards Institute (ANSI) C63.19 standard.

For information about hearing aids and digital

wireless phones

FCC Hearing Aid Compatibility and Volume

Control

http://www.fcc.gov/cgb/dro/hearing.html

Gallaudet University, RERC

http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm

HLAA (Hearing Loss Association of America)

http://www.hearingloss.org/learn/cellphonetech.asp

The Hearing Aid Compatibility FCC Order

http://hraunfoss.fcc.gov/edocs_public/attachmatc

h/FCC-03-168A1.pdf

UX390_Eng.qxd 7/7/06 6:01 PM Page 99

ACCESSORIES

100

ACCESSORIES

Battery Charger

The battery charger allows you to

charge your phone.

Battery

Standard battery and extended battery

are available.

Headset

The headset connects to your

phone allowing hands-free

operation. It includes earpiece,

microphone.

Battery Pack Charger

The battery pack charger allows you to

charge the battery pack itself without

the phone.

Swiwel Holster

Equip a holster with the phone to make

it stable by attaching it to one place.

There are a variety of accessories available for your mobile phone. Consult your local dealer for availability.

Optional items are sold separately.

UX390_Eng.qxd 7/7/06 6:02 PM Page 100

LIMITED WARRANTY STATEMENT

101

1. WHAT THIS WARRANTY COVERS:

LG offers you a limited warranty that the enclosed

subscriber unit and its enclosed accessories will be

free from defects in material and workmanship,

according to the following terms and conditions:

(1) The limited warranty for the product extends for

TWELVE (12) MONTHS beginning on the date

of purchase of the product with valid proof of

purchase, or absent valid proof of purchase,

FIFTEEN (15) MONTHS from date of

manufacture as determined by the unit’s

manufacture date code.

(2) The limited warranty extends only to the original

purchaser of the product and is not assignable

or transferable to any subsequent purchaser/end

user.

(3) This warranty is good only to the original

purchaser of the product during the warranty

period as long as it is in the U.S, including

Alaska, Hawaii, U.S. Territories and Canada.

(4) The external housing and cosmetic parts shall be

free of defects at the time of shipment and,

therefore, shall not be covered under these

limited warranty terms.

(5) Upon request from LG, the consumer must

provide information to reasonably prove the date

of purchase.

(6) The customer shall bear the cost of shipping the

product to the Customer Service Department of

LG. LG shall bear the cost of shipping the

product back to the consumer after the

completion of service under this limited warranty.

LIMITED WARRANTY STATEMENT

UX390_Eng.qxd 7/7/06 6:02 PM Page 101

2. WHAT THIS WARRANTY DOES NOT COVER:

(1) Defects or damages resulting from use of the

product in other than its normal and customary

manner.

(2) Defects or damages from abnormal use,

abnormal conditions, improper storage,

exposure to moisture or dampness,

unauthorized modifications, unauthorized

connections, unauthorized repair, misuse,

neglect, abuse, accident, alteration, improper

installation, or other acts which are not the fault

of LG, including damage caused by shipping,

blown fuses, spills of food or liquid.

(3) Breakage or damage to antennas unless caused

directly by defects in material or workmanship.

(4) That the Customer Service Department at LG

was not notified by consumer of the alleged

defect or malfunction of the product during the

applicable limited warranty period.

(5) Products which have had the serial number

removed or made illegible.

(6) This limited warranty is in lieu of all other

warranties, express or implied either in fact or by

operations of law, statutory or otherwise,

including, but not limited to any implied warranty

of marketability or fitness for a particular use.

(7) Damage resulting from use of non-LG approved

accessories.

(8) All plastic surfaces and all other externally

exposed parts that are scratched or damaged

due to normal customer use.

(9) Products operated outside published maximum

ratings.

(10) Products used or obtained in a rental program.

(11) Consumables (such as fuses).

LIMITED WARRANTY STATEMENT

102

LIMITED WARRANTY STATEMENT

UX390_Eng.qxd 7/7/06 6:02 PM Page 102

3. STATE LAW RIGHTS:

No other express warranty is applicable to this

product. THE DURATION OF ANY IMPLIED

WARRANTIES, INCLUDING THE IMPLIED

WARRANTY OF MARKETABILITY, IS LIMITED TO

THE DURATION OF THE EXPRESS WARRANTY

HEREIN. LGE MOBILECOMM USA INC. SHALL NOT

BE LIABLE FOR THE LOSS OF THE USE OF THE

PRODUCT, INCONVENIENCE, LOSS OR ANY

OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,

ARISING OUT OF THE USE OF, OR INABILITY TO

USE, THIS PRODUCT OR FOR ANY BREACH OF

ANY EXPRESS OR IMPLIED WARRANTY,

INCLUDING THE IMPLIED WARRANTY OF

MARKETABILITY APPLICABLE TO THIS PRODUCT.

Some states do not allow the exclusive limitation of

incidental or consequential damages or limitations on

how long an implied warranty lasts; so these

limitations or exclusions may not apply to you. This

warranty gives you specific legal rights and you may

also have other rights which vary from state to state.

4. HOW TO GET WARRANTY SERVICE:

To obtain warranty service, please call or fax to the

following telephone numbers from anywhere in the

continental United States:

Tel. 1-800-793-8896 or Fax. 1-800-448-4026

Or visit http://us.lgservice.com. Correspondence may

also be mailed to:

LG Electronics Service- Mobile Handsets

P.O. Box 240007, Huntsville, AL 35824

DO NOT RETURN YOUR PRODUCT TO THE

ABOVE ADDRESS

. Please call or write for the

location of the LG authorized service center nearest

you and for the procedures for obtaining warranty

claims.

103

LIMITED WARRANTY STATEMENT

UX390_Eng.qxd 7/7/06 6:02 PM Page 103

Accessories 100

Airplane Mode 76

Alarm Clock 63

Announce Alerts 78

Answer Call 75

Auto Answer 75

Auto NAM 72

Auto Volume 76

Backlight 69

Banner 69

Battery 16

Battery Charge Level 17

Best Match 78

Calculator 65

Call Setup 75

Call Timer 40

Change Lock 74

Charging the Battery 17

Clocks 70

Contacts 36

Contrast 71

Data Settings 77

Dialed Calls 39

Display 69

DTMF Length 69

E-mail 37

easyedge

Emergency #s 74

Erase All 51

Erase Calls 40

Erase Contacts 74

Ez Tip Calc 65

FCC Part 15 Class B

Compliance 9

FCC RF Exposure

Information 11

Fonts 71

Groups 37

Help 60

Icon Glossary 80

Images 61

Important Information 9

Important Safety

Precautions 1

Inbox 47

Installing the Battery 16

KB Counter 41

Key Tone 67

Language 71

List Contacts 36

Location 79

Lock Mode 20

Lock Phone 73

Manner Mode 20

Media 61

Menu Style 70

Menus Overview 14

Message Alerts 68

Messages 42

Missed Calls 40

Msg Settings 50

My Contact Info 38

My Phone Number 80

My Shortcut 64

Notepad 64

Number 37

One-Touch Dial 75

Outbox 49

INDEX

104

INDEX

UX390_Eng.qxd 7/7/06 6:02 PM Page 104

105

Phone Info 80

Phone Overview 12

Photo Msg 46

Power On/Off Tone 69

Power Saver 72

Received Calls 40

Recent Calls 39

Removing the Battery 16

Reset Default 74

Restrict Calls 73

Ringers 67

S/W Version 80

Saved 50

Schedule 62

Screen Icons 18

Screens 70

Security 73

Service Alerts 68

Set NAM 72

Settings 67

Shortcut Help 80

Sound Modes 78

Sounds 61, 67

Speed Dials 38

SpeedTalk

System 72

Table of Contents 4

Technical Details 9

Text Input 22

Text Msg 44

Theme Colors 70

Tools 62

Train Words 79

TTY Mode 76

Turning the Phone On and

Off 17

Voice Commands 77

Voice Mail 43

Voice Memo 64

Voice Services 77

Volume 68

World Clock 66

INDEX

UX390_Eng.qxd 7/7/06 6:02 PM Page 105

LG Electronics LGUX390 Mobile Phone with Push-to-Talk, Web Access, and Email

Product's Documents

User Manual

Specifications

LG Electronics LGUX390 Questions and Answers

Related Products

LG Electronics LGLX400 Mobile Phone with Push-to-Talk and GPS

LG Electronics F7200 Mobile Phone with Push-to-Talk and IM

LG Electronics LGAX355 Mobile Phone with Push-to-Talk and Flash Video Camera

LG Electronics LGAX4750 Mobile Phone with Push-to-Talk and Web Access

LG Electronics LGVX4700 Mobile Phone with Push-to-Talk and Voice Commands

LG Electronics CG300 Mobile Phone with Push-To-Talk and Bluetooth®