Loading ...
Loading ...
Loading ...
8
Consumer Support
Troubleshooting Tips
Care and Cleaning Operating Instructions Safety Instructions
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both
OFF
and
HI
the control
clicks
into position. You may hear
slight
clicking
sounds during cooking,
indicating the control is keeping the
power level you set.
A
HOT SURFACE
indicator light, on the
cooktop, will glow when any radiant
element is turned on. It will remain
on until the surface is cooled to
approximately 150°F.
Hot surface indicator light will:
■
come on when the unit is hot to the touch.
■
stay on even after the unit is turned off.
■
glow until the unit is cooled to approximately
150°F.
Be sure you turn the control knob to
OFF when you finish cooking.
Using the Bridge Burner
To use the bridge burner, turn the
left front control knob to the
BRIDGE
BURNER
settings.
For full bridge surface unit operation,
also turn on the left rear surface unit.
To use only the front surface unit, turn
the control knob to the
FRONT BURNER
settings.
Using the surface units.
Dual Surface Unit Control Knob
The right front surface unit has 2 cooking sizes
to select from so you can match the size of the
unit to the size of the cookware you are using.
To use the small surface unit, turn
the control knob to the
SMALL BURNER
settings.
To use the large surface unit, turn
the control knob to the
LARGE BURNER
settings.
Loading ...
Loading ...
Loading ...