Loading ...
Loading ...
Loading ...
6
Dishwasher Setup
Water Softening System
Your dishwasher requires soft water to ensure proper washing results and
is equipped with an internal water softening system. However, if you have
a household water softening system, the internal system provided is not
needed.
For the water softening system to function properly, it will need to use the
dishwasher water softening salt. The amount of salt dispensed can be set
from “H:00” to “H:07”. Salt is not required at H:00 (this is the default fac-
tory setting). The amount of salt required depends on the degree of hard-
ness of your tap water. See Table 1.
1 Open the door (for hidden controls only).
2 Turn the unit on using the [ON/OFF] button.
3 Hold down the “A” button (see page 4) and press [START] until the
display indicates “H:00”.
4 Release both buttons.
5 Press the “C” button to select the desired setting.
6 Save the selected setting by pressing [START] and close the door (for hidden controls).
Using the water hardness test strip
Wash Cycles Additional Features
Model Heavy Auto Delicate Normal Express
Glass
Care
Adjustable
Top Rack
Delay
Start
Eco
Option
Extra
Wash
Option
Extra Tall
Item
Sprinkler
Flip
Tines
Half Load
Option
Sanitize
Option
SHE7ER55UC X X X X X RackMatic X X X X X
SHE8ER55UC X X X X X X RackMatic X X X X X X X
SHE9ER55UC X X X X X X RackMatic X X X X X X X
SGE63E15UC X X X X X X Manual X X X X X X
Dip the test strip into tap water for a second. Shake
off excess water and wait approximately 1 minute
before comparing results.
After 1 minute
the test strip will
show you the
correct setting
Setting of
internal
water
softener
Fill water
softener with
salt?
0 H:00 no
1 H:00 no
2 H:02 yes
3 H:04 yes
4 H:06 yes
Loading ...
Loading ...
Loading ...