Loading ...
Loading ...
Loading ...
4
PARTS
1. Filter
2. Lid
3. Handle
4. Switch
5. Stand
BEFORE USING FOR THE FIRST TIME
Fill to max, boil, discard the water, then rinse. Do this twice to remove any manufacturing dust,
etc.
FILLING
1. Remove the lid.
2. Fill with at least 1 cup of water, but not above max.
3. Ret the lid. Always t the lid when boiling the kettle.
USING YOUR KETTLE
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I.
5. The light will come on and the kettle will start to heat up.
6. When the water boils the kettle will switch o.
7. To switch o manually, move the switch to O, or simply lift the kettle o the stand.
GENERAL
Note: When you lift your kettle, you may see moisture on the stand. This is normal and is caused
by the steam used to switch your kettle o automatically.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it o. If this happens,
unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle
to boil dry will shorten the life of the element.
CARE AND MAINTENANCE
1. Unplug the stand and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Open the lid.
4. Put a nger into the spout, and press on the centre of the lter to push it into the body of
the kettle.
5. Lift or tip it out of the kettle.
6. Rinse the lter under a running tap while brushing with a soft brush.
7. Fit the bottom of the lter into the guides at the bottom of the spout.
8. From inside the kettle, press the lter into the spout
9. Close the lid.
Loading ...
Loading ...
Loading ...