Loading ...
Loading ...
Loading ...
VEHICLE IMMERSION
NOTICE
If your vehicle becomes immersed, major
engine damage can result if the machine is not
thoroughly inspected. Take the vehicle in for
service before starting the engine. Your
POLARIS dealer can provide this service.
If it’s impossible to take your vehicle to a dealer
before starting it, follow the steps outlined
below. This procedure will allow for short-term
operation only to drive the ATV to a trailer or
towing vehicle.
1. Move the vehicle to dry land or, at minimum,
to water below the footrests.
2. Check the air box for any water and dry if
water is present.
3. Remove the spark plug.
4. Turn the engine over several times using the
electric start.
5. Dry the spark plug and reinstall it, or install a
new plug.
6. Attempt to start the engine. If necessary,
repeat the drying procedure.
7. Take the vehicle in for service as soon as
possible, whether you succeed in starting it or
not. Your POLARIS dealer can provide the
required service.
8. If water has been ingested into the
transmission follow the procedure on page
111 for drying the CVT.
108
MAINTENANCE
Loading ...
Loading ...
Loading ...