Loading ...
Loading ...
Loading ...
en
20
Specification and Performance
Data Sheet
Only for appliances with filter model: 9000 777 508
When using replacement cartridge: 9000 674 655
The concentration of the indicated substances
dissolved in water entering the system was reduced to
a concentration less than or equal to the permissible
limit for water leaving the system as specified in ANSI/
NSF Standard 42 and Standard 53.
Rated capacity: 739.68 gallons/2,800 litres
Contaminant reduction determined by NSF testing.
* Based on the use of Cryptosporium parvum oocysts.
It is essential that the manufacturer’s recommended
installation, maintenance and filter replacement
requirements be carried out. See manufacturer's
documentation for warranty information.
Note
While the testing was performed under standard
laboratory conditions, actual performance may vary.
More detailed information on the prices of spare parts
is available from your appliance dealer or parts
salesman on site.
m Warning
To reduce the risk associated with
ingestion of contaminants:
Do not use the system with water that is
microbiologically unsafe or of unknown quality without
adequate disinfection before and after connecting to
the system. Systems certified for cyst reduction may be
used on disinfected water that may contain filterable
cysts.
EPA Establishment Number 10350-MN-005
m Caution
To reduce the risks associated with property damage
due to water leakage:
■ Read and follow User Instructions before installation
and use of this system.
■ Installation and use must comply with all state and
local plumbing codes.
■ Do not install the system if water pressure exceeds
120 psi/827 kPa. If your water pressure exceeds 80
psi, you must install a pressure limiting valve.
■ Contact a plumbing professional if you are uncertain
how to check your water pressure.
■ Do not install the system where water hammer
conditions may occur. If water hammer conditions
exist, you must install a water hammer arrester.
Contact a plumbing professional if you are uncertain
how to check for this condition.
■ Do not connect the system to hot water supply lines.
The maximum operating water temperature of this
filter system is 100 ºF/33 ºC.
■ Protect filter from freezing. Drain filter system when
temperature drops below 33 °F/1 °C.
■ Change the disposable filter cartridge in the
following cases:
Once the rated capacity has been reached, if there is
a noticeable reduction in flow rate, or after six
months at the latest.
Manufactured by:
■ 3M Purification Inc.
400 Research Parkway
Meriden, CT 06450
Tel. (800) 222-7880
Tel. (203) 237-5541
3M is a trademark of the 3M Company used under
license.
NSF is a trademark of NSF International.
© 2013 3M Company. All rights reserved.
System tested and certified by NSF
International against ANSI/NSF
Standard 53 and Standard 42 for the
fulfilment of the requirements
specified on this Specification and
Performance Data Sheet.
Contaminant Reduction Chlorine Taste and
Odour
Particle Class 1 Particle Size >/
= 0.5 to <1.0 μm
Cysts* Turbidity
Average Influent 2.1 mg/l 9,100,000 pts/ml 170,000 cysts/l 11 NTU
Influent Concentration 2.0 mg/l +/- 10% At least 10,000 particles/ml Minimum 50,000 cysts/l 11 +/- 1 NTU
Avg. % Reduction 97.6% 98.8% 99.99% 98.1%
Average Product Water Concentration 0.05 mg/l 111,817 pts/ml 0.001 cysts/l <1 NTU
Max Permissible Product Water
Concentration
N/A N/A N/A 0.5 NTU
NSF Reduction Requirements >/=50% >/=85% >/=99.95% 95%
NSF Test Report J-00121313 J-00099871 J-00109715 J-00099885
Application Guidelines/Water Supply Parameters:
Service Flow 0.75 gpm
2.83 lpm
Water Supply Potable Water
Water Pressure 30 - 120 psi
207 - 827 kPa
Water Temperature* 33 °F - 100 °F
0.6 °C - 38 °C
Loading ...
Loading ...
Loading ...