Loading ...
Loading ...
Loading ...
48
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms Check list
Page
Ɣ
The image on the screen is moving in an
oblique direction.
(PC input mode only)
Ɣ
Adjust “Horizontal Clock” and “Clock
Phase”.
32
Ɣ
The coarse horizontal stripes could be
seen in full-display mode.
(PC input mode only)
Ɣ
Adjust “Horizontal clock”.
32
Ɣ
The part of the image is lacking.
(PC input mode only)
AAAAA
Ɣ
Try “Auto Adjust”.
32
Ɣ
The horizontal stripes are moving
vertically with flickering screen.
(PC input mode only)
Ɣ
Check the Signal status of the PC by
pressing Recall button
on the remote
control.
32
Ɣ
When the characters are displayed on the
whole screen, the vertical stripes appear
and some of the characters are blurred.
(PC input mode only)
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
Ɣ
Try “Auto Adjust”.
Ɣ
If the display condition is not improved with
Auto Adjust, adjust “Horizontal Clock”.
32
Ɣ
When the letter string is displayed in
full-screen, all of the characters
on the
screen is blurred.
(PC input mode only)
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
Ɣ
Try “Auto Adjust”.
Ɣ
If the condition is not improved with Auto
Adjust, adjust “Clock Phase” till you get
clearest image.
32
Ɣ
When the small patterns are displayed on
the screen, the entire screen is flickering.
(PC input mode only)
Ɣ
Try “Auto Adjust”.
Ɣ
If the condition is not improved with Auto
Adjust, adjust “Clock Phase” till you get
flicker-free display.
32
Ɣ
Image cannot be displayed in the correct position.
(PC input mode only)
Ɣ
Press button to check if input signal of
the displayed image is compatible with the
specification of the television.
49
,
52
Ɣ
No Picture or sound is output. (DTT mode only)
Ɣ
It might occur because it is tuned to digital
teletext channel.
Ɣ
Return to another channel.
40
Ɣ
Forgotten password. (DTT mode only)
Ɣ
Press and hold down [Yellow],
[Blue] and
buttons on the remote
control simultaneously for over 3 seconds
so that the password returns to the default
setting (0000).
42
Ɣ
Due to the bad reception, block noise (DTT mode only)
Ɣ
Check the aerial system to improve signal
quality.
14
Ɣ
Local time displays incorrectly.
(DTT mode only)
Ɣ
Check if you select correct area in “Local
time” from “General setting”.
42
Loading ...
Loading ...
Loading ...