Loading ...
Loading ...
Loading ...
9
Operation and Controls
It is recommended that you install the Whynter BCR-291SB in a place where the ambient temperature is between
(68°F - 78°F). If the ambient temperature is above or below recommended temperatures, the performance
of the unit may be affected. For example, placing in extreme cold or hot conditions may cause interior
temperature to fluctuate thus the set temperature may not be achievable.
CONTROL PANEL GUIDE
POWER
The appliance turns on automatically once plugged in. To turn off the unit, unplug the appliance from the power
outlet.
NOTE: If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3 -5 minutes be-
fore restarting the appliance. If attempted to restart before this time delay, the appliance may not start.
ºF/ºC SELECTOR
To change temperature conversions, press the icon on the control panel.
SETTING THE TEMPERATURE
The unit has two separate temperature zones. The temperature range of upper zone can be set between 40ºF
and 50ºF while the lower zone can be set between 50ºF and 66ºF. To set the desired temperature, press the
icon to lower the temperature or icon to raise the temperature on the control panel. The temperature display
will flash 10 times indicating that the desired temperature is set and will revert back to its current internal tempera-
ture.
NOTE: The temperature inside the unit is dependent on the ambient temperature (room temperature).
During normal operation, the temperature display on the control panel shows the temperature inside the appli-
ance.
The unit has two separate temperature zones. The temperature range of the upper zone is between 40ºF and
50ºF (5ºC and 10ºC) and the LOWER ZONE is between 50ºF and 66ºF (10ºC and 18ºC)
When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The
preset temperature for the upper temperature zone is 50ºF (10ºC) and for lower temperature zone is 66ºF
(18ºC).
The temperature that you desire to set will increase 1ºC or 1ºF if you press the + key once and will decrease
1ºC or 1ºF if you press the - key once. The display flashes while you make the setting.
To view the set temperature at any time, press the + or - key, the set temperature display will temporarily flash
10 times. Then the display shows the current internal temperature again.
INTERIOR LIGHT
The interior light makes it easy to view your cheese and wine labels, which also enhances the display of your col-
lection. You can turn on and off the interior light by pressing the icon on the control panel.
Loading ...
Loading ...
Loading ...