Loading ...
Loading ...
Loading ...
www.BISSELL.com
7
WARNING
Before using your vacuum, make sure the Dirt Container is in locked position and
the filter is in place. DO NOT operate your vacuum without a filter.
Operating The Product
To use the Blower function, insert the
hose with the notch facing upward and
twist clockwise to lock in place.
Turn the power ON or OFF by
switching the power switch to the ON
(I) or OFF (O)position.
For above floor cleaning, disconnect the
floor tool from the end of the Extension
Wand and attach desired accessory.
3
4
For full suction power, close the Air Flow
Regulator by sliding the regulator down
to the closed position. Open the Air Flow
Regulator to reduce suction power for
vacuuming delicate fabrics.
To vacuum carpets and rugs, push the
Brush Switch to the carpet position to pull
the brushes up into the Floor Nozzle.
6
To vacuum bare floors, push the Brush
Switch to the bare floor position to extend
the brushes down from the Floor Nozzle.
7
For wet cleaning, use the Wet
Cleaning Foot to vacuum up spills.
5
1
2
8
This product should not be used with
detergents or to pick up foaming wet
messes.
Loading ...
Loading ...
Loading ...