Loading ...
Loading ...
Loading ...
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
7.5 Setting the TIME DELAY
function
1. Set a heating function.
2. Press again and again until
starts to flash.
3. Press
or to set the minutes and
then the hours for DURATION time.
Press to confirm.
The display shows flashing .
4. Press
or to set the hours and
then the minutes for END time. Press
to confirm. The display shows
and the set temperature.
Oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds
for 2 minutes. and time setting flash
in the display. The oven turns off.
5. Press any button or open the oven
door to stop the signal.
6. Turn the knob for the heating
functions to the off position.
7.6 Setting the MINUTE
MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press
again and again until and
"00" flash in the display.
2. Press or to set the seconds
and than the minutes.
When the time you set is longer than
60 minutes,
flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time the signal
sounds.
5. When the set time ends the signal
sounds for 2 minutes. "00:00" and
flash in the display. Press any
button to stop the signal.
7.7 COUNT UP TIMER
To reset the Count Up Timer, press and
hold
and . The timer starts to count
up again.
8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
8.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the oven
turns off.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and
the plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
Every time you put the core
temperature sensor in the
socket, you need to set the
core temperature time
again. You cannot select the
duration and end time.
www.aeg.com12
Loading ...
Loading ...
Loading ...