Loading ...
Loading ...
Loading ...
06
Preparing the device for operation
Preparing the device for operation
1. Contact a licensed specialist to install the device.
2. Guarantee that the unit is appropriately fastened and complies with all of the
aforementioned safety norms.
3. Before operating the air conditioner, ensure that the air filter is installed
correctly.
4. If the unit has been out of use for a long period of time, it is recommended
that the air filter be cleaned before use. During continuous use, clean the air
filter every two weeks.
5. This air conditioner was designed for use under the following conditions:
Cool
MODE
Indoor Indoor Outdoor Indoor Outdoor
Dehumidifier
Temperature Temperature Temperature
Heat
*
61°F~86°F 61°F~86°F 61°F~86°F -5 °F~110°F
* only for models with heating function
Outdoor
-5°F~110°F -5°F~75°F
Attention!!
If air conditioner is used outside of the above conditions, certain safety
protection features may come into operation and cause the unit to
function abnormally. Room relative humidity should be less than 80%. If
the air conditioner operates in excess of this figure, the surface of the air
conditioner may attract condensation. Please set the horizontal louver to
its maximum angle (vertically to the floor), and set HIGH fan mode.
Optimum performance will be achieved within these operating
temperature.
Loading ...
Loading ...
Loading ...