User Manual - Page 128

For 2016 BMW X4 XDRIVE35I.

Loading ...
Loading ...
Loading ...
Deactivating DTC
Press button again.
TRACTION and the DSC OFF indica‐
tor lamp go out.
Performance Control
Performance Control enhances the agility of
the vehicle.
To increase maneuverability, with a corre‐
spondingly sporty driving style, wheels are
braked individually. The resulting braking
power is simultaneously largely compensated
by an engine intervention.
xDrive
xDrive is the all-wheel-drive system of your ve‐
hicle. Concerted action by the xDrive and DSC
further optimize traction and driving dynamics.
The xDrive all-wheel-drive system variably dis‐
tributes the drive forces to the front and rear
axles as demanded by the driving situation and
road surface.
Display on the Control Display
Displaying xDrive view
1.
"Vehicle info"
2. "xDrive status"
The following information is displayed:
With a navigation system: compass display
for the driving direction
Pitch attitude with degree and percentage
Transverse gradient with degree indication
Graphic display for the steering
HDC Hill Descent Control
The concept
HDC is a downhill driving assistant that auto‐
matically controls vehicle speed on steep
downhill gradients. Without applying the
brakes, the vehicle moves at slightly more than
walking speed.
Hill Descent Control can be activated at
speeds below approx. 22 mph/35 km/h. When
driving downhill, the vehicle reduces its speed
to approx. walking speed and then keeps its
speed constant.
As long as there is active braking, the system
is on standby. The system does not brake the
vehicle during this time.
Only use HDC in low gears or in selector lever
position D or R.
Increasing or decreasing vehicle
speed
Specify desired speed in the range from ap‐
prox. 4 mph/6 km/h to approx. 15 mph/25 km/h
using the rocker switch of the cruise control on
the steering wheel. Vehicle speed can be
changed by lightly accelerating.
Press the rocker switch up to the point of
resistance: the speed increases gradually.
Press up the rocker switch past the point
of resistance: the speed increases while
the rocker switch is pressed.
Press the rocker switch down to the point
of resistance: the speed decreases gradu‐
ally.
Seite 128
Controls Driving stability control systems
128
Online Edition for Part no. 01 40 2 964 144 - VI/15
Loading ...
Loading ...
Loading ...