Loading ...
Loading ...
Loading ...
18
3. Pull the lter out of the housing.
4. Remove the water lter cap from the water lter being
replaced.
5. Install the water lter cap onto the new lter. Be sure to align
the arrows so the groves in lter align with ribs in lter cap.
6. Insert the lter into the housing.
7. Twist the water lter and turn 90° clockwise until
it locks into place and the arrows are aligned.
8. Push the water lter door closed.
9. Flush 3 gallons (11.4 L) of water through the water system to
clear air from the water line and to keep the dispenser from
dripping and/or avoiding decreased dispenser ow.
NOTE: If the lter is not installed correctly, water may
dispense at a lower ow rate and there will be slower ice
production. Improper lter installation may also cause the
water lter housing to leak.
The Water Filter Status Lights
The water lter status lights will help you know when to change
your water lter.
■ Order lter (yellow): It is almost time to change the
water lter. “Order Filter” display is on all of the time but
off in Showroom mode and Sabbath mode.
■ Replace lter (red): Replace the water lter. While you
are dispensing water, “Replace Filter” will blink seven times
and an alert tone will sound three times.
NOTE: “REPLACE lter” will remain illuminated if the lter
is not reset on the user interface (UI).
■ Reset Filter: Touch MAX COOL and MAX ICE for
3 seconds to reset water lter. The display will do a
3-second countdown, then ash the icon and play a tone.
Install FreshFlow™ Air Filter
An air lter is 15 times more powerful than baking soda at
reducing common food odors inside the refrigerator.
On some models, your refrigerator’s accessory packet includes
an air lter which must be installed prior to use.
Loading ...
Loading ...
Loading ...